Octagonal Boat Table - Recessed Flush Mount - 19-3/8" Diameter - High-Impact Plastic - Ivory

Video Transcript for Jif Marine Boat Accessories - Tables - 315-DSI-KF Review

Speaker 1: Today we are taking a look at an eight sided boat table. Now, this table is designed to bolt onto the floor of your boat to provide extra table space. It's constructed of molded high impact plastic. That's here at the tabletop. This is ivory in color and has a wood grain texture to it. Really nice design.

Cleans easily with soap and water. It also resists UV rays, salt, and corrosion. The leg is stainless steel, so that ensures stability and strength. In the bottom piece, the base is a durable molded plastic as well.Now, on the tabletop, we have four built in cup holders. They do have holes in the bottom of them to allow water to drain through or drain out.

Each one has an opening diameter of three and a half inches with a base diameter, you can see how that kind of narrows down here, of two and three-quarters of an inch at the bottom. The overall depth of each cup holder is two and one-quarter inches deep.Now, I do want to point out that this table is available in basically two different styles. You have the recessed flush mount option with part number 315-DSI-KF, or the surface mount option with part number 315-DSI-KS. I'm showing you the surface mount option today and here's the base for the recessed flush mount. So, you would need a hole for this to sit in and then the leg would fit into this portion here.

Obviously, you would bolt or screw everything down as needed. Then everything else is identical. You would have the leg with the table attached to the top of it.Nice lightweight design. The tabletop, from edge to edge, again it's an eight sided design, but from edge to edge it's 19 and three-eights inches. The center area has a diameter of six inches and a depth of a half inch.

The diameter of the base is six and a half inches. This one right here, again, this is the surface mount option, it has an overall table height from the bottom of the base to the top of the table of around 27 and a half inches. The recessed flush mount is around that same measurement. When I put the other one together and measured it, I got a measurement of 26 inches. That would be from the decking or the flooring of your boat to the top of the tabletop.That's going to do it for today's look at the eight sided boat table.