Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(105 reviews)
Price: $184.93
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11085
Retail:$289.95
Our Price: $184.93
You Save: $105.02
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (105)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11085
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11085 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2012 Honda Accord Coupe
- 2008 - 2012 Honda Accord Sedan
- 2011 - 2014 Acura TSX Sport Wagon
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11085
Average Customer Rating: 4.9 out of 5 stars (105 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Sean05/27/2023
2009 Honda Accord
Initially, I was impressed, when I installed the right side. And then when went to go do the left. I noticed that one of the washer didn’t have a hole. It had an out line of it. Since everything was out and halfway installed. I had to drill and modify it. Instead of notifying it. (Took me 2 hours extra with my minimal tools I had.
by: Rich G09/16/2013
2012 Acura MDX
Installed on a 2012 Acura TSX Sport wagon took me about 1.5 hours to finish. Looks great! I'm mostly using for my Yakima bike rack with little to no towing, I have a MDX for that.
Marc
8/9/2014
Do you have some detail images and did you need to cut the spoiler cover?
Rich
8/22/2014
The only thing that I had to cut was the heat shields. Other then that pretty straight forward. I cant attach any more photos to this reply, sorry
by: Freda11/08/2023
I was glad to hear the technician say no concern with rust before he installed the hitch.
Looks good
by: Harold04/07/2024
The package is missing many pieces. The ball mount, ball, pin and electrical wires are missing. Please send the additional missing pieces.
by: Fernando08/17/2019
2011 Honda Accord
Great product!! Bought this for a bike rack and it works great. My friend is a mechanic and installed it with me (he has all the tools). Took us less than 30 minutes. Would definitely recommend.
by: Big M12/30/2023
2011 Acura TSX
I dialed up the necessary hitch, paid for it and it was here a day and a half later. It showed up about two in the afternoon. I dropped it off and the mechanic had it on and ready to go by 5 o’clock. Fit perfectly. The hitch is bomb proof.
by: James03/31/2022
George - I love it - or I should say it like this - I was able to install it just as outlined in the directions with no problem at all - I have been using it and love having it. Quality of the product was top-notch and I am super satisfied with it. I also ordered the wiring harness for the Honda Accord as well and again they both installed perfectly. Great products from you - you should be proud of all of the products you sell if they are all like this one. Also, I thought it worth mentioning here, I also bought a 3/4 Ton HF folding trailer along with a ball and hitch riser. Attached Photo doesn't really show the hitch but because of the hitch I have this beautiful trailer to use. So a long story short - I love the CURT Trailer Hitch for my 2012 Honda Accord, it turned my Honda into a 3/4 Ton pick up when needed!
Thanks again and please call or email if you would like more information or to hear more about my satisfaction with your product.
by: Skylar09/26/2023
i haven't used the hitch yet but e trailer had my hitch shipped within 2 hours of my order on a sunday, and it was delivered with free shipping within 48hours of placing the order, thoroughly impressed with the way they handled the order!
by: Michael S06/20/2018
2009 Honda Accord
I installed this myself on the back of my 2009 Honda Accord Coupe. I would say this it is somewhat difficult to install, due to having to slightly widen holes to fit the bolt holds through. Though, despite the slight difficulty, it only took me about 45-60 min to complete.
I used this to tow a 5x8 trailer loaded to its full capacity 1800 miles from Indiana to Florida and it has definitely met my expectations. It remained completely rigid throughout the journey despite having been put under a lot of stress, between steep hilly highways and pothole torn streets.
I also purchased a 2” Rise:
And the corresponding wiring harness:
Though I would instead recommend a 2-½” - 3” rise, especially if you have a heavily loaded trailer as I did, as the 2” rise was a little low.
I would recommend this to anybody looking to tow anything with their Honda Accord due to its rigid construction and sleek design.
by: Albert04/10/2013
2010 Honda Accord
The parts came very quickly and I installed that day after work. I have a V-6 so the muffler has four hanger in the rear that needed dropped. The installation was very easy and took about two hour with wiring harness and all. I was given two leads to pull bolts thru. I used one end to go from the small hole to the accesses hole and then pulled the other end back. That was much easier to do than trying to find the wire in the small hole. All in all it was very straightforward. I did the installation in my garage on the floor no problems. Picture attached.
by: H. C.05/13/2018
2010 Honda Accord
Just mounted it, but haven't towed anything yet. I don't understand why the hardware is just a hair wider than the factory hole on my Accord, I have to use a filer to remove a little bit of material from the frame to put it on. Other than that, this product is great. Feel solid and easy to install.
by: Harley T08/11/2018
2011 Honda Accord
Great directions. Easy install. Looks great on back of vehicle. Using hitch to pull small utility trailer for my jet skis. Wiring harness was even easier to hookup.
by: Chelvin01/18/2020
Love this hitch! Took me about 45 mins to install. The installation was straightforward and probably took me more time prepping than installing. Get an extra set of hands for a little help, easily doable alone as well.
by: Wesley 03/06/2023
2008 Honda Accord
Nice hitch. I installed it myself using after watching the video tutorial 3 times. I am moderately mechanical and can do most of my car maintenance and car repairs. So this was not too bad. The only sketchy think was fishing the spacer and bolt through the frame. I added som tape to the wired/coiled bolt puller to insure the bolt did not come off inside the frame. So far it works great with my bike holder!
by: KJ03/30/2017
2012 Ford Edge
Purchased this hitch (Curt C11085) for my 2012 Honda Accord LX sedan 4 cylinder. Selected this over the competing Draw-Tite 24899/ Hidden Hitch 60325 (which are identical hitches made by Cequent), so I would be able to reinstall the black plastic underbody panel after the hitch was installed. (The installers in the video for the Draw-Tite/Hidden Hitch were not able to reinstall the underbody panel, since the hitch blocked the fastener holes for the panel. So the installers simply left the panel off, which I did not want to do).
After removing the muffler heat shield and the black plastic underbody panel, I installed the hitch, which fit perfectly. Then I trimmed and reinstalled the muffler heat shield. After that, I cut the rectangular hole in the underbody panel as per directions, but also made a single cut (with a Sawzall) straight back from the rectangular hole to the back edge of the panel. That permitted me to be able to easily reinstall the underbody panel AFTER the hitch was installed. (Since I was working alone, I figured it would be too cumbersome to try to install the underbody panel AND the hitch at the same time, as the installer did in the video for the 2011 Honda Accord.)
All in all, everything went smoothly and fit perfectly. Visually, it looks fine to me. And the hitch works great.
by: Herb08/31/2017
2012 Honda Accord
Excellent hitch and instructions. Fairly easy to install on my 2012 Honda Accord. Selected this hitch because it keeps the factory plastic trunk cover while the Draw-tite hitch discards this cover. Instructions were perfect, including dimensions for cut outs in the plastic trunk cover and aluminum heat shield. Found a good method for installing the hitch and plastic cover alone. Used a 1" wide canoe tie-down strap threaded through the car towing hook and corresponding slots in the hitch. Lifted both parts and tightened the strap, holding the hitch and cover in the raised position. Next installed the left and right bolts, easy with the weight carried by the strap. Finally removed the strap and installed the U bolt.
by: Greg M09/19/2019
Installation was quick and easy by my mechanic. We used the hitch to take 4 bikes from Monmouth county, NJ to Cape Cod with no problem at all.
Greg M.
9/19/2020
Perfectly!
by: AbStract06/11/2016
Ford F-150
Easy to setup as fast as 40 min. instruction was easy to follow. Great buy. will be looking forward to getting another hitch for my Ford F-150.
Abstract
6/11/2017
Still working great to Hitch my bike, easy to install. Mechanic wanted 250 to install it.
by: Michael 03/31/2021
2012 Honda Accord
Love it, mostly easy to install besides having to pull off the scrape guard and cut a hole in it to fit the hitch through on my 2012 Accord. Good build quality
Michael
4/4/2022
The hitch is still holding strong, have never had an issue with it!
by: Geoff C.12/02/2014
2012 Honda Accord
I am an avid online shopper. Etrailer.com is the best online store I have ever dealt with. Here is why. Deciding to pit a hitch on my vehicle, I went on YouTube to see how it would be doing it myself. Etrailer had a video for just about every vehicle out there. I searched for mine and found a step by step detailed video of a tech actually installing the hitch, wiring harness and showing me how to do everything! So I went to their site and priced it all. After searching around their price couldn't be beat. When I ordered online, I received a phone call and an email from a rep within 15 minutes. He noticed a part I ordered would fit my hitch(was for my wife's car) and after speaking to him and confirming it was what I wanted put my order through and was on my doorstep in 3 days! That just showed me how they truly care about the customer by monitoring every order they receive. Trust me you can't go wrong with etrailer.com!
by: Ty R.06/11/2015
2009 Honda Accord
Easy to install. Bolt leader wire is a super idea; made a nightmare into a no brainer. Installed on my 2009 Accord like a breeze. Install video is excellent!
Ty R.
6/12/2016
WonderfulI love it. I told my neighbor about it and the ease of installation and he just recently bought one for his vehicle. He likes it too!
by: Sheryl05/09/2016
Honda Accord
I have owned this trailer hitch for a year and have had no problems with it. It serves my 2011Honda Accord very well. I use it to attach a bike rack with 2 bikes.
by: Barb R06/10/2015
2012 Acura TSX
I took this to a mechanic to have it installed on my 2012 Acura TSX sport wagon.
After he got the exhaust system dropped, he fastened the bolts on the bracket first and showed me that the center wouldn't fit. I called etrailer, upset that the darn thing didn't fit, and got to talk to a live human being (nice!)
While she was telling me what the possible problem and fix might be, (drilling out the holes a bit) my mechanic took the bolts out and tried attaching the center portion first.
Success!
So it cost me around 50 bucks to have this done, which meant that I didn't have to worry about the car dropping on my husband or son's head and squishing them. Money well spent, imho.
by: Edward02/10/2021
This was the third hitch I have purchased from your company, and I have been very pleased each time. The main reason why I gave four stars instead of five is that two of the hitches I purchased arrived with torn boxes and the hitch sliding around in the box.
So:
Product- great
Price- great
shipping time: great
packaging for shipping: poor
I'll probably be buying another hitch from you soon as I will be buying another car.
by: Brian R08/06/2014
2010 Honda Accord
Great product, Super fast shipping, one of the few times I have enjoyed an online transaction. No having to call to explain what I want, no returning 2 or 3 times like I have in the past. Just simple, lots of information and even a video to show how to install makes my life easier
Brian R.
8/7/2015
Thanks for the contact, I love the hitch. It has held up wonderfully the last year, I was just thinking last night about the installation of it and how easy it had been compared to some of my other projects. Enclosing the tool to get the bolts to the correct location was fantastic. No rust on the hitch, and no issues at all. I work at a plant that makes boat trailers and have seen how rust can attack them, and looking at the hitch I am impressed.
25
105
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Hitch for a 2011 Honda Accord I took a look online and the 2011 Honda Accord has a maximum towing capacity of 1,000 lbs so the capacity of all the available hitches would be well over what the vehicles can handle. This is common practice amongst hitch manufacturer's and why we advise customers to verify their vehicle's actual capacity and not go off of what the hitch can do. The EcoHitch Hidden Trailer Hitch item # 306-X7299 is the only hitch available for the 2011 Accord that has a 2" receiver. It however only fits...
view full answer... - How To Use A 2 Bike Carrier On A 2009 Honda Accord That Has A 1-1/4 Hitch ReceiverI have a solution for you, however, there are not any 2" trailer hitch receivers available for your 2009 Honda Accord. I recommend going with the Curt Trailer Hitch Receiver 1-1/4" # C11085 then using adapter Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R to convert it to 2". Then it will be compatible with the Kuat Envy 2.0 Bike Rack # BA22B that you were wanting. The only drawback here is that when using the 1-1/4" to 2" adapter you will lose 50% of your hitch's...
view full answer... - Trailer Hitch Receiver and Adapter For 2 Receiver For a 2012 Honda AccordThe only custom fit trailer hitch receivers available for your 2012 Honda Accord are the Curt # C11085 or # C11496. Both these receivers are class I receivers as there are no class III receivers that will fit your Accord. You may be able to use a Buyers Products Trailer Hitch Receiver Adapter # HTAD to convert your receiver to accept a 2" hitch mounted accessory but it will reduce the maximum tongue weight of the receiver by 50%. The Tekonsha T-One Vehicle Wiring Harness # 118420 will...
view full answer... - Recommended Trailer Hitch and Bike Rack for 2012 Acura TSXThe trailer hitches that are designed for the 2012 Acura TSX are all Class I hitches. This is most likely because this vehicle is not rated to support the heavier loads that a Class II or greater hitch is capable of towing. Since you have a Sport Wagon model, the only confirmed trailer hitch to fit your vehicle is the Curt Class I Round Tube Receiver Hitch # C11085. This has a 200 pound tongue weight and 2,000 pound towing weight capacity. This is a custom fit hitch for your vehicle, so...
view full answer... - Is the Curt Class I Trailer Hitch C11085 Compatible With a 2011 Acura TSX Sport WagonYes, the Curt Class I Trailer Hitch, # C11085, will fit on your 2011 Acura TSX Sport Wagon. This hitch does not require any welding and comes will all hardware needed for installation. I have attached the installation instructions and an installation video for you to check out. The vehicle in the video is different, but the installation process will be the same. If you plan on carrying any hitch style accessories with this trailer hitch you must use the Curt Trailer Hitch Support Strap,...
view full answer... - Is Trailer Hitch Towing Capacity A Flexible FigureWith trailer hitches there is no safe wiggle room beyond what they state as the official capacity for it. So with the Curt hitch part # C11085 we cannot safely recommend you exceed the 200 lb capacity. There also isn't a higher rated hitch available for your vehicle.
view full answer... - Correct Towing Products for a 2011 Honda AccordThe part 116813-56173-40001 can be broken down into a few different parts. The first 6 digits (116813) are the same as a Class I Curt trailer hitch and it will only fit a 2013 - 2017 Honda Accord. The next 5 digits, same as part # C56173, is a wiring harness that fits a 2013 - 2017 Honda Accord. And the last 5, same as part # C40001, is only a 1-7/8" hitch ball but it would fit the ball mount that comes with the trailer hitch mentioned above. If you have a Sedan or Coupe then the Curt...
view full answer... - Parts Needed To Tow A DK2 Flatbed Trailer With A 2012 Honda AccordTo start your 2012 Honda Accord will need a trailer hitch, if it doesn't already have one then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11085. This hitch is a custom fit for your 2012 Honda Accord and uses the factory holes in your Accord's frame to bolt on with no drilling required. For the trailer wiring harness I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118420. This custom-fit T-One connector plugs into your...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring for a 2012 Honda AccordTrailer wiring, ball mounts, balls, and other accessories are sold separately for Curt trailer hitch # C11085. The recommended ball mount is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. Then use # F-4 for the pin and clip. For trailer wiring use # 118420. I have linked the instructions for the hitch and wiring and linked a video for the wiring as well.
view full answer... - Trailer Hitch and Wiring for a 1992 Mercedes 400EThere is a special circumstance when using a Class I trailer hitch for towing. Basically you will have to use the ball mount specified by the hitch manufacturer or it can void the warranty. This is to ensure that the wrong ball mount is not used (which could be too much stress on a Class I hitch). Trailer hitch C11085 does not fit your 1992 Mercedes 400E. The hitch you need is # C11816. The recommended ball mount for this hitch is # C45503. For a compatible 1-7/8 inch ball use # 19256...
view full answer... - What Size Hitch is Available for 2011 Honda Accord CoupeFor lighter duty vehicles like your 2011 Honda Accord coupe there are only hitches with the 1-1/4 inch size available as this is a lighter duty hitch. So best option would be the Curt hitch part # C11085 with a bike rack that is designed to fit this size like the Hollywood Racks Trail Rider part # HR200Z which is very stable and easy to use.
view full answer... - Will Brophy Rise Adapter part # HT5R Fit Curt Hitch Installed on 2010 Honda AccordYou would just barely have the clearance to install the Hitch Adapter, but it will fit. I checked the dimensions the Curt hitch # C11085 had when installed on a 2010 Honda Accord like yours with the dimensions of the adapter and there is room. The tongue weight rating of your hitch after the adapter is installed will be 100 lbs since the adapter would reduce it down to that. That means that as long as your bike rack weighs less than 40 lbs you would be within capacity. Curt requires the...
view full answer... - Trailer Hitch Recommendation for 2011 Honda Accord SedanThe hitch we have available for your Accord is a Class I hitch, Curt Class I hitch, part # C11496. If you'll be towing, you'll also need the # 118420 trailer wiring harness, a ball mount and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball # 19258. None of the hitch manufacturers we do business with offer a 2 inch hitch for a Honda Accord. The portion of the vehicle that the hitch bolts to isn't capable of withstanding the type of capacities the Class III 2 inch receiver can...
view full answer... - Is there a 2 Inch Hitch for a 2012 Honda Accord?No, there is not. The only way to add a hitch to a 2012 Honda Accord is by installing one with a 1-1/4" receiver. I recommend the Curt Trailer Hitch item # C11085. This hitch is custom fit and bolts to your Honda with included hardware. It is a class I hitch with a 1-1/4" receiver. It fits both the sedan and coup models. I have linked an installation video below to help you get it set up. If you are planning on towing you will also need a wiring harness item # C55502 for the sedan or...
view full answer... - Does Trailer Hitch Receiver for 2011 Honda Accord Fit Model with Dual ExhaustYes, the Curt # C11085 does fit your 2011 Honda Accord Sedan with dual exhaust. I've linked a video of it on a 2008 that has dual exhaust for you to take a look at. This is a Class I hitch receiver and Curt requires you use a support strap, # 18050, for any non-trailer loads like a bike rack or cargo carrier.
view full answer... - Will the Hollywood Racks Road Runner Bike Rack Fit on a 2010 Honda Accord LX SedanWe have many bike racks that will work with a Curt trailer hitch, like part # C11085, on your 2010 Honda Accord LX, however, the Hollywood Racks Road Runner 3 Bike Rack, # HR310, will not fit. The fit issue is not with the bumper of your vehicle, but with the trailer hitches that are available for your vehicle. This bike rack is only compatible with class II trailer hitches and there are only class I trailer hitches available for your Accord. You could use the Yakima DoubleDown 2 Bike...
view full answer... - Recommendation to Transport Tadpole Trike with 2011 Honda Accord SedanWe do have a great hitch-mounted bike rack that is designed specifically for a Tadpole bike like what you will be purchasing with the Hollywood Racks Sport Rider # HR1000Z-R-TRKADP. This particular carrier is compatible with both 1-1/4 inch and 2 inch hitch receivers and can secure a trike of up to 100 pounds. The maximum trike width it will work with is 36 inches and a maximum wheelbase of 74 inches. A bike and hitch lock can be added with the Anti-Rattle Hitch Lock and Cable Lock # HRLHPTC...
view full answer... - Hitch and Bike Rack with Locks for 2013 Acura TSXThe Curt hitch # C11085 is a fit for your 2013 Acura TSX Sportwagon and would be a great option to carry a hitch mounted bike rack. As far as a lock for a bike would go that is going to depend largely on the bike rack you pick. Most racks have specific locks that have to be used with them which sometimes are included but sometimes can be purchased separately. For example the Hollywood Racks Destination part # HLY94FR comes with a hitch lock but if you wanted to upgrade it to a lock setup...
view full answer... - Hitch and Bike Rack Recommendation for a 2011 Honda AccordHonda may not offer a trailer hitch for your 2011 Honda Accord, but we do! If you have a coupe (2 door) or sedan (4 door), you would want the Curt hitch part # C11496. If you have a Crosstour model you would want part # 306-X7299. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. This...
view full answer... - Recommended 2-Bike Hitch-Mount Rack for 2012 Acura TSX WagonFor your 2012 Acura TSX Wagon, I recommend looking at the Thule Doubletrack Pro XT Bike Rack # TH92BJ. This is ia great platform-style bike rack that is compatible with both 1-1/4 inch and 2 inch trailer hitch receivers and will hold up to 2 bikes at 35 pounds each. An important feature on this rack with regards to your city bikes is the sliding, reinforced wheel trays. These can be adjusted and moved to accommodate bikes of different lengths and eliminate bike-to-bike contact. This means...
view full answer... - Recommended Hitch To Install A Bike Rack On A 2012 Honda Accord SedanThe hitches we have available for your 2012 Honda Accord EX-L Sedan will all involve trimming of the heat shield and underbody panel. The instructions for the Curt # C11085 do explain what will need to be done in detail and I included an install video that will also show what needs to be done. With that being said, the # C11085 will be my recommendation as this is an American made hitch and will handle your Kuat Sherpa 2.0 Bike Rack, like the # SH12G, without any issue at all.
view full answer... - Trimming Underbody Panel To Install Curt Class I Receiver # C11085 on 2011 Honda AccordIf you click the provided link, you can see a video showing the Curt Class I trailer hitch, part # C11085 being installed on a 2011 Honda Accord. I've also linked the installation instructions, which includes a specific diagram showing precise dimensions of where the panel needs to be trimmed.
view full answer... - Fit of Curt Class I Receiver Hitch on 2012 Honda Accord CoupeThe Curt Class I hitch receiver, part # C11085 is compatible with 2008-2012 Accord Sedan and Coupe models. I confirmed this by phoning my Curt representative who assured me that the # C11085 will indeed fit your 2012 Accord Coupe. If you will be towing with your hitch, you might need the following accessories: Curt Class II Drawbar, part # C45521 Pin and Clip, part # F-4 Trailer Wiring Harness w/ 4-Pole Trailer Connector, part # 118420 1-7/8 Inch Trailer Ball, part # 19256 2 Inch Trailer...
view full answer... - Fit of Curt Class I Hitch # C11085 on 2012 Honda Accord Coupe W/ HFP Ground EffectsTrailer hitches are designed for the factory vehicle configuration. When aftermarket parts such as ground effects or exhaust systems are added, it can have an effect on the fit of the hitch. Curt has not tested the fit of their # C11085 hitch on a vehicle equipped with the HFP ground effects, so they cannot tell me if the hitch will fit or not. I spoke with my contact at Curt, and found that the hitch has a 4-7/8 inch drop. The top of the receiver tube that must clear the underside of...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Dan D
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Ryan G
Test Fit:
Bradley B
Video by:
Kathleen M
Video by:
Alan C
Video by:
Jonathan Y
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
6/8/2023
We have gotten this information out to the manufacturer to inform them about this batch of hitches to make sure no one else has this problem in the future.