Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

See what our Experts say about this CURT Trailer Hitch

• Trailer Wiring for 2006 Dodge Sprinter for Taillight Functions of Trailer
  If your 2006 Dodge Sprinter does not have trailer wiring currently (since you are buying a hitch I can predict that it does not) you'd need to go with a kit like the Curt # C59236 which hardwires to the vehicle's taillight wiring. This kit will allow you to control all of the taillight functions of your trailer.
  view full answer...
• Recommended Trailer Hitch Receiver for a 2003 Freightliner Sprinter
  I do have a trailer hitch receiver for your 2003 Freightliner Sprinter but the Curt Trailer Hitch Receiver part # C13388 is only confirmed to fit a Sprinter from 2007-2018. As you have a 2003 the correct hitch for you is the Curt Trailer Hitch Receiver part # 14250. If you plan to be towing a trailer in the future then you will also need a wiring harness and ball mount/hitch ball. For a wiring harness I recommend using theh 4 Pole Trailer Connector part # C59496 and for a ball mount the...
  view full answer...
• Need to Reposition Spare Tire when Installing Curt Class IV # 14250 on 140 Inch Wheelbase Sprinter
  According to Curt Manufacturing, the # 14250 Class IV receiver can be installed on the 140 inch single (not dual) rear wheel model without the need to relocate the spare tire. It is only the 118 inch wheelbase models that would require the spare tire to be relocated. To see the installation instructions, click the provided link.
  view full answer...
• Will Curt Trailer Hitch Receiver Fit a 2002 Freightliner Sprinter SHC2500
  I verified with my contact at Curt that as long as your 2002 Freightliner Sprinter is the single rear wheel model the Curt Class IV Trailer Hitch Receiver # 14250 will work for you.
  view full answer...
• Compatibility of the Curt Class IV Hitch # 14250 on a 2006 Dodge Sprinter Van w/ OEM Step Bumper
  The Curt Class IV Trailer Hitch Receiver, # 14250, will fit your 2006 Dodge Sprinter w/ OEM step bumper after some minor modification to the installation hardware. The Curt hitch instructions state that for the factory step bumper models, the corner of the 1/4 inch spacer plates, that are included with the hitch, will have to be broken off to allow the reinstallation of the step bumper. There will be no modification to the actual bumper of the Dodge Sprinter.
  view full answer...
• 2003 Newmar Country Starr Trailer Hitch Recommendation
  I have a solution for you but the Curt Hitch part # 14250 that you looked at has bees custom designed for the small Sprinter chassis. Instead you want to use the DrawTite Multi-Fit Motor Home Trailer Hitch part # 82201 this is designed to fit frame widths between 47" and 71" which will match up to your frame perfectly. There are no custom fit options available for your 2003 Newmar Kountry Starr available. This hitch will connect to the frame using the supplied hardware or by having it welded...
  view full answer...
• 2006 Dodge Sprinter Trailer Hitch and Spare Tire Compatibility
  We have two hitch receiver options compatible with your 2006 Dodge Sprinter, however both options do require relocating the spare tire. The compatible hitch receivers are the Curt # 13250 you referenced and the Curt # 14250 which has a higher capacity rating. You may want to consider the Roadmaster Spare Tire Carrier # RM-195125 which won't allow for trailer towing but will allow for flat towing or use of an accessory like a bike rack or cargo carrier.
  view full answer...
• Choosing Between Curt 14250 and Draw-Tite 75210 for 2003 Dodge Sprinter Van
  Because we haven't installed either hitch at our facility, I don't have the specific dimensions you're needing, but I can provide a ballpark figure that could be helpful to you. When installed, the top of the receiver tube for either hitch will sit about 1 inch below the rear bumper of the vehicle, which means that the underside of the hitch will sit right about 4 inches below the underside of the bumper. The face of the receiver tube will protrude about 1-1/2 inches past the rear edge...
  view full answer...
• Trailer Hitch, Ball Mount, Balls, and Wiring for a 2006 Dodge Sprinter
  To go with Curt trailer hitch # 14250 I recommend etrailer ball mount kit # EBMK2216. It includes a ball mount, a 2 inch ball, a 2-5/16 inch ball (which is probably what you meant since there are no 2-5/8 inch balls), a hitch pin with clip, and a storage bag. You will also need to add a trailer wiring harness to your Sprinter if it does not already have one. You can use # C59236. I have included links to the installation instructions for the hitch and wiring for you.
  view full answer...
• Hitch and Wiring Fits for 2004 Dodge Sprinter
  Both of our primary hitch suppliers, Curt and Draw-Tite, show no vehicle listing for a M-B branded Sprinter for model year 2004. Only a Dodge Sprinter is listed, both 2500-series and 3500-series. You can confirm the correct hitch based on the van's wheelbase and drivetrain. If you click on the "Select Vehicle Style" drop-down menu tool at the top of the linked page you can select your Sprinter's configuration; you will then see the hitches just for that setup. For example, for a 118-inch...
  view full answer...
  
• Trailer Hitch Receiver to Fit 2005 Mercedes-Benz Sprinter 2500 with 118 Wheelbase
  The Curt Trailer Hitch Receiver, part # 14250, is confirmed to fit the 2005 Dodge Sprinter with the 118 wheelbase and does require the spare tire to be relocated. From my research the Sprinter wasn't released in the US market under the Mercedes-Benz name until 2010 so I'm assuming you have one that was manufactured for markets outside of the US. If this is the case I can't say for sure how well the hitch will fit your van, or if the spare tire must be relocated. Although it's a pretty...
  view full answer...
• Hitch Receiver Needed to Install on Inside Frame of a 2003 Freightliner Sprinter
  The Curt Trailer Hitch Receiver # 14250 that you referenced does mount on the inside of the trailer frame, but it does require bolts to be run through from the outside of the frame (see attached picture). You will need to make sure that you have room on your frame as this is the best option for you. The only other options mount on the outside of the frame on your 2003 Freightliner Sprinter. I have linked the installation instructions for you to check out. If you let me know what you...
  view full answer...
  
• Will the Curt Trailer Hitch # 14250 Stick Out from Rear Bumper on 2004 Dodge Sprinter
  Although we have not install the Curt # 14250 Trailer Hitch on a 2004 Dodge Sprinter 3500 as of yet, I was able to go out to the warehouse and find that from the forward-most mounting hole (towards the front of your Sprinter) to the end of the hitch receiver opening is about 19-1/2 inches. If you compare this measurement with the mounting hole location on the underside of your Sprinter you can estimate about where the hitch will sit.
  view full answer...
• Distance From Mounting Plate Bolt Hole to End Of Receiver Tube on Curt 13250 and 14250 Hitch
  The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at. If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides...
  view full answer...
  
• Trailer Hitch that Fits 2008 Dodge Sprinter Extended Wheelbase
  If you have the extended wheelbase version 2008 Dodge Sprinter 3500 the hitch you'd want is the part # 13358. I attached an install video that shows how this installs as well. Nothing really gets changed to complete the install.
  view full answer...
• Trailer Hitch for a 2006 Dodge Sprinter with 158 Inch Wheel Base, Dually Wheels, and Step Bumper
  For your 2006 Dodge Sprinter with the 158 inch wheel base and dual rear wheels with the step bumper I recommend Curt trailer hitch # 14250. Since you have the 3500 series Sprinter, this hitch will allow you to maximize the amount of weight you can tow (consult owners manual for towing capacity of the Sprinter). The hitch is rated for 10,000 pounds gross trailer weight and 1,000 pounds tongue weight. When used with weight distribution it is rated for 12,000 pounds gross trailer weight,...
  view full answer...
• Trailer Hitch Rated for 10K Towing for a 2003 Dodge Sprinter with 140 inch Wheelbase and DRW
  The Curt Class IV Trailer Hitch # 14250 will only fit if your 2003 sprinter has the 140 inch Wheelbase with Single Rear Wheels. Since you have a 140 inch Wheelbase with Dual Rear Wheels the next best option is the Curt Class III Trailer Hitch # 13265 which is rated for 6K Towing/600 lbs Tongue but then jumps up to 10K Towing/1K Tongue when used with a weight distribution (WD) system like the Equal-i-zer w/ 4-Point Sway Control # EQ37120ET. Please note that your Sprinter must be rated for...
  view full answer...
• Which Trailer Hitches Fit a 2006 Dodge or Freightliner Sprinter without a Step Bumper
  There are 5 versions of the 2006 Dodge/Freightliner Sprinter so to determine if there is a hitch that will fit we have to look at which specific model you have. If you have the 118 inch wheelbase, single rear wheel model you can use # 13250 or # 14250 If you have the 140 inch wheelbase, single rear wheel model you can use the same Curt hitches above as well as # 75210 If you have the 140 inch wheelbase, dual rear wheel model you can use # 13265 If you have the 158 inch wheelbase, single...
  view full answer...
• Does Spare Tire have to be Removed to Install a Trailer Hitch on a 2006 Freightliner Sprinter RV
  You should not have to relocate the spare on the 158 inch wheelbase models of the 2006 Freightliner Sprinter when installing Curt trailer hitch # 14250. However, it is always a possibility there will be interference because of slight differences amongst vehicles. I have included a link to the installation instructions for you. To add trailer wiring use # C59496. I also recommend etrailer ball mount kit # EBMK2216. It comes with a ball mount, 2 balls, a hitch pin with clip, and a storage bag.
  view full answer...
• Can the Curt Trailer Hitch for the 2005 Dodge Sprinter Van be Easily Installed and is Spare Removed
  If your 2005 Dodge Sprinter Van with 158 inch wheel base has dual rear wheels and factory step bumper, you will need to remove the step bumper support brace on the passengers side only. This installation can definitely be done by an individual, especially someone who has experience installing hitches. You will not need to remove/relocate the spare tire for installation of the hitch. You may want to consider the following items to complete your towing setup: etrailer.com Ball Mount Kit,...
  view full answer...
• 2-Inch Hitch for 2004 Dodge Sprinter with 140-Inch Wheelbase for Use with Hitch Bike Rack
  For use with a 2-inch hitch bike carrier I recommend the Curt Class III hitch # 13250 as it is a confirmed fit on your 2004 Dodge Sprinter with step bumper and 140-inch wheelbase. Class IV hitch # 14250 fits your van too but for use with a bike rack you will not need this hitch's 1000-lb tongue weight (TW) capacity, so the Curt # 13250, rated for 600-lbs TW, will be a great choice that actually costs you less. The linked photo shows you the appearance of the hitch and step bumper after...
  view full answer...
  
• Recommendation of a Trailer Hitch for a 2003 Freightliner FL-70 Semi Truck
  At this time none of our manufacturers we work with offer custom fit trailer hitches for your 2003 Freightliner FL-70. On the other hand, we offer heavy duty weld-on specialty trailer hitches. I have included a couple links to all the weld-on hitches we offer. A certified welding professional is recommended when installing weld-on hitches.
  view full answer...

Do you have a question about this Trailer Hitch?