Distance From Mounting Plate Bolt Hole to End Of Receiver Tube on Curt 13250 and 14250 Hitch

Question

Question:

Hi. I need the depth dimensions of items # 13250, and # 14250. I need to know how far they stick out from the rear of the vehicle. A measurement from one of the mounting holes to the tip of the receiver would work. I have a clearance concern due to a wheelchair lift on the vehicle. 2006 Sprinter 2500 118wb. Thanks

asked by: Thomas R

0

Expert Reply:

The Curt # 13250 has a length of 13-1/2" from the center of the first bolt hole on the mounting bracket to the end of the receiver and the # 14250 has 14" with the same measurement. I've also linked photos of these with those dimensions illustrated for you to have a look at.

If there is a specific length you're seeking, just let me know and I can see if there is anything we have that will work. I've also linked an installation video of the # 13250 for you to have a look at, where it provides some measurements that you might find helpful as well.

expert reply by: Erik B

0

click to enlarge

Answer 1

I have a solution for you but there are no custom fit hitches for the narrow 30 3/8 inch frame 2011 Mercedes Benz Sprinter 3500 Dually models. They weren't as widely produced and some have a service body or step bumper which obstructs where a…

view full answer...

Answer 2

You won't have any fitment issues with the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15809. I've attached a photo of this installed so you can see the exhaust fit with this hitch will allow plenty of…

view full answer...

Answer 3

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

view full answer...

Answer 4

Since your truck frame is 34 inches from outside to outside that means that it originally was a cab and chassis truck. I have a solution for you, but it will require you drill some holes in the frame. The Curt hitch part #C15400 has a drop of 6-1/4…

view full answer...

Answer 5

In regards to the Curt Trailer Hitch Receiver part #C15704 which is a fit for a 2003 Dodge Ram 3500, the distance from the top of the flange to the top of the hitch cross tube is 6.65" exactly.

view full answer...

Answer 6

The main differences between the Curt Trailer Hitch Receiver part #C15704 (Standard) and the Curt Trailer Hitch Receiver part #C15809 (Commercial) is that the commercial version hangs down lower which is by design to allow for better clearance on…

view full answer...

Answer 7

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

view full answer...

Answer 8

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

Answer 9

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

view full answer...

Answer 10

The factory trailer hitches on the 2006 Dodge Ram 2500s are welded on. You can add a Class V Curt hitch, #C15409 for a 2 inch receiver or #C15809 for a 2-1/2 inch receiver, and either will install beneath the factory hitch. I have linked videos…

view full answer...

Answer 11

I spoke with my contact at Curt, who tells me that some Ram trucks, even though they were manufactured as pickup trucks were assembled using the spring mounts from the cab and chassis trucks. The Cab and Chassis truck spring mount would extend below…

view full answer...

Answer 12

I would be happy to help you. We have those items and I was able to get the measurements for you. I have attached pictures detailing the specific dimensions you have asked for. The Curt Hitch Receiver Item #13250 fits the 118 inch wheelbase with…

view full answer...

Distance From Mounting Plate Bolt Hole to End Of Receiver Tube on Curt 13250 and 14250 Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching