Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
(2463 reviews)
Price: $50.70
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
Item # 2736
Retail:$80.59
Our Price: $50.70
You Save: 37%
Need help with installation?
Locate installers near me- All Info
- Reviews (2463)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch Ball Mount - 2736
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- No Ball
- 5000 lbs GTW
- Class III
- Draw-Tite
- Long Shank
- Steel Shank - Gloss Black
- 1 Inch Ball Hole Diameter
Sturdy steel ball mount with hollow shank measures 12" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction with hollow shank
- Black powder coat finish covers a-coat base for superior rust protection
- Hitch pin and clip or hitch lock sold separately
Specs:
- Application: 2" x 2" trailer hitch receivers
- Gross towing weight: 5,000 lbs
- Tongue weight: 500 lbs
- Length: 12" from center of hitch pin hole to center of ball hole
- Rise: 3/4" from top of inside of hitch opening
- Drop: 2" from top of inside of hitch opening
- Ball hole diameter: 1"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
2736 Draw-Tite Ball Mount for 2" - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
Customer Reviews
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs - 2736
Average Customer Rating: 4.9 out of 5 stars (2463 Customer Reviews)
Sturdy steel ball mount with hollow shank measures 12" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.by: Ruben A G.02/27/2017
The Ball Mount was noisy upon hitting bumps, uneven road, etc.
I have since gone to a shorter, dampened ball mount but I have to remove the spare tire when I use it!!!
Ruben
by: jim06/15/2017
The receiver is exactly what I was looking for. Put it on a 2016 chevy traverse and it is the right length for pulling a trailer. Looked at 6 1/2 inch, too short. Quality is good also. I give it 4 stars.
by: Rick R.06/27/2013
Product works okay as the o.d. is small and makes a sloppy fit to the receiver.
by: Donald06/02/2022
Ez install, works as it should.
by: Joseph06/26/2018
Hasn't fallen off yet
by: David05/30/2016
Very beefy well made
by: Aubrey 10/11/2019
fast shipment--good quality>>>
by: Larry10/23/2014
Good products..
by: Jeremy 01/25/2022
by: Ben 02/21/2021
by: Michael 12/21/2021
by: Brian02/04/2022
by: Gene03/30/2024
tl;dr good experience with warts. The etrailer-branded ball mount kit I ordered was back-ordered for a month, which was fine. Eventually Ashley E told me it would be a _second_ month. Not fine. She helped me configure a new order of third party parts. Shipped in one day. Great! Not great: Parts were just thrown in a box with no protection. UPS did their usual thing. Paint was chipped in a couple of places; would surely rust. I'll shoot these spots with some spray paint before installation. Hope that's a fix. I can't afford to diddle with a return.
by: Greg12/27/2023
the ball was missing in the package the rest was ok, delivered when expected but had to go fish out from UPS as the package was not accepted due to damaged container. all was ok but no ball on ball mount ?
by: Paul D.07/17/2017
I needed an extended ball mount for my new Jeep in order for my utility trailer tongue to clear the rear mounted spare tire. Item is as described on the web site and was received earlier than expected.
etrailer has great customer service and is my number one go to place for towing and trailer supplies.
by: Gary 04/26/2024
Sara R was helpful helping me find the right hitch for what I described as needing.
I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression.
Overall, excellent customer service and product.
by: Dale 04/02/2024
Almost everything about this combo is great my only concern is the locking clip wraps around a notch in the pin instead of sliding through a hole in the pin., otherwise the insert and ball work well on my Subaru Wilderness.
by: Neil M08/07/2013
Overall, I have to say that I am satisfied although not particularily impressed. The finish on the ball mount is mediocre ... there are several spots where the paint is chipped off for instance. It was received today and installed today with no use yet the pictures show the areas in question. You can tell by the label installation that someone who really didn't care rushed the operation. It also fit considerably looser than the Reese bar that I removed. I had to apply several turns of duct tape around the tube to make it as snug as the original. As I said, it'll do fine, just not impressed.
by: Kathryna02/08/2024
Delivery was fast and on time. Thanks to their installation video the install was a snap. I didn't even need to lift the van. I played a piece of card board on the ground used a couple of wood blocks to support one end while I fished and fastened the bolts. I thought it would be a lot more difficult, therefore I was pleasantly surprised. Definitely a quality product from a quality company. Thankyou ETRAILER.
by: Tim02/09/2024
I had previously purchased the etrailer hitch for my 2021 Ford Transit 150.
It was a little short in length and the bumper prevented my current ball mount from working. As always, etrailer had the perfect solution. The Draw-Tite is well made and will now remain permanently with the van to be handy whenever the need arises.
by: Justin 02/13/2024
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
by: Timothy E.03/01/2017
Great products and service. I was able to order everything I needed to add a tow hitch and ball to my 2006 Jeep liberty. Very fast shipping. They even called me to verify orders and availability. Clear and easy to follow installation instructions. I hauled an [retailer] trailer from Texas to Ohio without any issues. Even bought a trailer and use it frequently for hardware stoe runs.
by: Leo 03/25/2024
It's a drop hitch not much to say, exactly what i ordered, and fast shipping.
by: Pete04/03/2024
Changed this item out as wanted a lover receiver. Return was super easy! Great customer service!
by: Daniel 04/03/2024
Very good service Stacey was very nice and helpful and new just what I needed.I would recommen etrailer to any one.keep up the great service
25
2454
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount
- 2 Inch Trailer Hitch Extension for 2014 Dodge Ram with Front Mount Trailer HitchI do have a solution that might work for you, though it is not an extender. An extender would reduce your tongue weight capacity of the hitch by half, so it is not the best solution for you. Instead, I recommend a long ball mount. Take a look at # 2736 as an example. It is rated for 5,000 pounds and measures 12 inches long from the center of the hitch pin hole to the center of the ball hole. It has a 3/4 inch rise or a 2 inch drop. We also have # BM20. This ball mount measures 13-1/4"...
view full answer... - Can Thule Spare Me Bike Carrier Be Mounted On Spare Tire At Rear Of Popup CamperThe spare-mount bike racks we offer are not designed to be used on any towed trailer but I do have a solution for you. If you have a 2 inch trailer hitch I recommend a towing bike carrier like the Swagman Original Towing Bike Rack, part # S64675. This attaches to the ball mount in your trailer hitch and allows you to be able to carry up to 4 bikes between the rear of your vehicle and the camper. A longer ball mount is needed for this bike rack. You can check out part # 2736 or part...
view full answer... - Recommendation for a Bike Rack for Use When Towing a Trailer with a 1996 Jeep CherokeeThere are a couple of options for you to carry a bike a rack and tow a trailer at the same time. First, you can use a towing rack. I recommend the Curt Clamp-on, part # C18013. It fits around a ball mount shank. A couple of things to note about this method are the ball mount length and the tongue weight. This bike rack requires that the ball mount have a distance of 10 inches from the center of the hitch pin hole to the center of the ball hole. If you need a ball mount that is compatible,...
view full answer... - Towing Trailer and Carrying Bikes with MotorhomeThe Surco Ladder Mounted Bike Rack, part # SP501BR includes one strap that would typically be passed through the bike frames, the front wheels and around the ladder, which would prevent the wheels from spinning and would do a pretty good job of keeping the bikes in place. Adding bungees and foam padding of some sort would probably be a good idea if you are wanting to prevent the bikes from being scratched. The Swagman # S80600 would most likely interfere with a trailer, but it would depend...
view full answer... - Options for Towing Trailer and Carrying Bike Rack on 2009 Ford EscapeWe do not have a dual receiver hitch for your 2009 Ford Escape with a 1-1/4 receiver hitch, however we do have several excellent options for you. You can use a Class III hitch like the etrailer Trailer Hitch Receiver, # e56AR. Check out the installation instructions that I have included for you. With this hitch you have the option of using a Hitch Mounted Towing Bike Rack # S64675. This rack fits firmly over the ball mount of your 2" receiver, enabling you to tow your trailer while carrying...
view full answer... - Towing Bike Rack for a 2004 Volkswagen TouaregThis bike rack will work as long as your 2004 Volkswagen Touareg has at least a Class III trailer hitch and a drawbar that has at least 3" of space. The trailer hitch's tongue weight capacity is reduced by the weight of the bike rack and the bikes when towing. If your ball mount does not have the required clearance you could use ball mounts, # 2736 or # D-28. Extra-Long ball mounts with a Rise/Drop usually do not work because of the angled metal supporting the ball mount face.
view full answer... - Anti-Rattle Device Suggestion while using a Towing Bike Rack and Pop Up CamperFor use while towing with your pop up camper trailer and hitch mounted towing bike rack, the best option would be to use the Anti-Rattle Device for a 2 inch hitch # 63232. This device will eliminate any additional rattling by pulling the ball mount portion of the hitch to one side. It also provides a secure locking mechanism for your hitch. Please keep in mind that this locking device can only be used on hollow hitch devices, it is also advised to remove this locking mechanism when the...
view full answer...
- Solutions for Towing Forest River Roo Travel Trailer and Carrying Bikes SimultaneouslyThere are a few different options that might work for you. A towing bike rack can be a good option depending on the tongue weight of your camper. The Curt # C18013 used in conjunction with an extra long ball mount like # 2736 or # D-28 (choose the one with the rise or drop you're needing) might be a good option, but keep in mind that the tongue weight capacity of the hitch would be reduced by the weight of the rack and the bikes. For instance, say the three bikes weigh 100 lbs. The rack...
view full answer... - Recommended Long Ball Mount That Fits Hitch Ball with 1 Inch Shank to Use with Swagman Traveler XCSI suggest using the Draw-Tite # 2736 ball mount. It measures 12 inches from the hitch pin hole to the ball hole and will work with your hitch ball that has a 1 inch shank. It also has a 3/4 inch rise. This will give you plenty of room along the ball mount to install the Swagman Traveler XCS Bike Rack # S64664 and still let you tow your popup camper.
view full answer... - Will Drawbar Fit 2009 Chevy Traverse?I went out to the warehouse and measured ball mount # AMSC2. It is 4.75 inches from the pin hole to the weld. We do have drawbars that could clear the bumper and license plate face. For example, drawbar # 2736 is 7 inches from the pin hole to the weld. This may give you the clearance you need. It is a different design and a capacity of 5,000 lbs, but can get the job done for you. I have included a link to it below.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Brian T
Updated by:
Mike S
Updated by:
Matthew E
Updated by:
Noah M
Video by:
Dustin K
Video Edited:
Chris R
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.