2 Inch Trailer Hitch Extension for 2014 Dodge Ram with Front Mount Trailer Hitch
Question:
I have a Dodge Ram 2014 Auto 4x4 Mega Cab with a front hitch C31015 and a nudge bar also. What I need is to extend the Ball Assy forward of the hitch out past the nudge bar. Can you do 2x 2inch extension say 12inch long, Male/Female? Thank you
asked by: Leigh F
Expert Reply:
I do have a solution that might work for you, though it is not an extender. An extender would reduce your tongue weight capacity of the hitch by half, so it is not the best solution for you. Instead, I recommend a long ball mount. Take a look at # 2736 as an example. It is rated for 5,000 pounds and measures 12 inches long from the center of the hitch pin hole to the center of the ball hole. It has a 3/4 inch rise or a 2 inch drop.
We also have # BM20. This ball mount measures 13-1/4" from the center of hitch pin hole to center of ball hole, is rated for 10,000 pounds and has a 3/4 inch rise or 2 inch drop.
These long ball mounts do not reduce the hitch tongue weight capacity like an extender does because it is one connection from the receiver to the ball. With an adapter you would have 2 connections, the extra one being between the ball mount and the extender.
Check out the video reviews of these ball mounts I have included.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Long Shank
- Draw-Tite
more information >
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Brophy
more information >
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Front Mount Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Q&A: Recommended Hellwig Anti-Sway Bar for a 2018 Ram 2500
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Comparing Draw Tite and Curt Front Hitches for 2018 Ram 2500
- Q&A: Differences Between Curt and Draw-Tite Front Mounted Hitch Receviers for 2017 Ram 2500
- Q&A: Where Does EcoHitch Hidden Front Mount Hitch # 306-X7900 Install on 2018 Ram 2500
- Q&A: Can Brush Guard be Used With Front Hitch Receiver on 2016 Ford F-250 Super Duty
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommemded Replacement for Furrion DV1200 RV Stereo
- Article: Best Bike Racks for Electric Bikes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: How to Charge a Dump Trailer Battery
- Article: How to Carry Bikes While Towing a Travel Trailer