Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant ball mount is 6-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (1998 Customer Reviews)
Corrosion-resistant ball mount is 6-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.The drawbar being hollow in the male end seemed to be too large in diameter to fit the female receiver on my car's fairly new hitch. I had to hammer the drawbar into the hitch. I doubt i will ever be able to remove this drawbar without destroying what it was hammered into. While drawbars with solid male ends easily slid in and out of my car's hitch. I'm not pleased.
I ordered a Draw-Tite Sportframe Trailer Hitch for my 2005 Toyota Avalon, a hitch ball, a drawbar with a 3 1/2" rise and the wiring kit necessary to connect my car to a 4 prong trailer connection. The tutorials were great and along with the instructions included made the installation fairly easy to install everything myself. The prices were the best I could find on all the items and everything shipped fairly quickly and arrived in good time. I use all of these products together weekly to pull my boat and enjoy various lakes that are available in my area. I would highly recommend this website and it's products and have ordered other items since my original purchase with satisfaction.
This is a hollow steel shaft with solid steel tongue for the ball. The steel is heavy gauge. Mine fit perfectly into my motorcycle trailer hitch receiver. I have bought trailer hitches from eTrailer in the past. As usual, this is another quality product at a fair price DELIVERED TO MY DOOR!
Solidly built. For my application, 2014 Cruze, I should have gotten a longer one. This works but it puts my trailer tongue really close to the bumper.
looks perfect.
No problems so far. Fits the oddly shallow trailer (also purchased here) for my toyota corolla 2001. It interferes with the license plate to where I have to bend it to get things to fit, but it should still be workable.
A great product with outstanding customer service from etrailer!
This was a very minor purchase.. Yet, it was handled very nicely. We have the product, on time, and it works great.........WHAT A COUNTRY........thanks
Great Prices and Product.... Fast shipping...What more would you want!!!!
Rich
6/18/2015
absolutely great
Would be nice if it was 1/2" or so away from the car bumper.
Fast delivery, quality part, great customer service, at a fair price. Repeat customer and loving it !
Product exactly has described ... fast shipping ... excellent transaction!
Product was as described, worked well.
Great product, delivered on time.
Easy quick transaction
Great product
Haven't used it yet. I bought it because of CURT's quality. It was beat up in shipping though.
For Mazda CX-3 owners, this is the drawbar you need to achieve the correct final hitchball height for small U-Haul cargo or motorcycle trailers. You know the receiver sits quite low so this gets the height just where it needs to be, especially when the trailer is properly weighted/loaded.
This 13" drawbar keeps the tailgate off the trailer jack.
Being that long also keeps it I storage immediately after I disconnect the trailer.
No need for a locking pin.
Be sure to test fit your rig before trip day. Had to increase the safety chain length with this new ball mount. Not a big deal, but glad I caught it early!
I was in need of a hitch higher than the standard 3 or 4 inch riser and spoke with Samatha B, after a couple of emails she found a 5 inch riser for my 1 1/4" receiver. Just what I needed and a happy customer. Received very quick and good sturdy quality. Thanks again!
I am an infrequent trailer user, but getting my daughter home from college was necessary in March. This drawbar fits my hitch and utility trailer well, did exactly what it is supposed to do, and was the last thing to be concerned about right then. I have a '11 Mini Countryman S with a Class II receiver from Mini Fini, (which cost twice as much as a Curt) where the hole is flush with the fake grille near the bottom of the bumper cover, so I needed the long bar to reach out past the bumper. The Curt receiver for that car hangs visible underneath the bumper (ugly), which also increases the lever arm on the receiver beam and would have needed an even taller rise. (Curt take note!) All just part of the kit to create an occasional 1 ton pickup out of my Mini, leaving the "bed" at home most of the time.
3.5 stars. Product looks like it should perform as advertised, but it arrived with several chips in the paint. This is most likely due to improper surface preparation and cleaning before the powder coat was applied. As you can see in the photos, there is already some surface rust on some of the areas, including the hole for the hitch pin. Ultimately the paint will get scratched up from use, but it would be nice to see some extra attention to detail from the factory.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
9/19/2023
Hmmm, it sounds like the powder coat on the ball mount may be too thick. We generally suggest to sand down the powder coating on the ball mount slightly. You will definitely need to recoat the powder coating paint with a rust-oleum type of paint to prevent future corrosion. I have a link below for your reference.
Helpful Links
faq-rust-prevention-maintenance.aspx