Curt Hitch Pin and Clip for 3" Hitches - 5/8" Diameter x 4-3/4" Span

Video Transcript for Curt Hitch Pins and Clips - Standard Hitch Pin - C21507 Review

Speaker 1: Today we're taking a look at the Curt Hitch pin and clip for three inch trailer hitch receivers. This hitch pin secures a ball mount, or hitch mount accessory inside the receiver tube of your trailer hitch.The clip then inserts on to the end of the pin to hold the pin in place. The clip is included. This is made from a sturdy, steel construction, and it has corrosion-resistant zinc plating on it, that way it won't be affected by rust or corrosion. It will last a long time.A few measurements to go over with you real quick: the diameter is 5/8 of an inch, and the usable pin length is measured basically from the edge right here, because that's where the clip would insert, so it measures from this edge all the way to where it starts to curve. If we put a ruler on there and measure that, it has a usable pin length of about 4 3/4 inches.This is going to be perfect for those larger hitches, like a 2 1/2 inch by 2 1/2 inch hitch, as well as the 3 inch by 3 inch trailer hitch.

That's going to do it for today's look at the Curt Hitch pin and clip for trailer hitch receivers.