Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
9" Wide x 30" long x 13" tall. This sturdy, corrosion-resistant stainless steel fender is excellent for your boat trailer. Slanted back provides extra clearance for your boat. Easily bolt onto your trailer.
Features:
Specs:
This fender is made of heavy-duty stainless steel, which is highly resistant to rust and corrosion, making it great for boat trailers. The steel is also polished to a brilliant shine. Give your trailer a stylish touch with this fender.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everybody. I'm Ellen here at etrailer.com. We're going to be taking a quick look at the single axle trailer fender. This helps to protect other drivers from any rocks or mud or anything getting slung up at them. It also helps to protect the gear on your trailer from the same. You don't have to worry about any debris getting deflected or slung up underneath those tires onto your equipment, your vehicles, or anything else that you might be towing on your trailer.This is a slant back design.
A lot of times these will be used on a marine style trailer or a boat trailer. It should match up with the side of your trailer. As you can see, it's going to have a little bit of a taper at the bottom compared to the top. It's just a little bit more flared down here than it is up at the top or the apex of that fender. It is made out of a 16 gauge electro polished stainless steel.
It looks really nice and shiny, pretty much rustproof as well. It does have a PVC coating on it to protect it from any kind of scratches.It is a weld on or bolt-on installation. It does not have any pre-drilled holes, although there are a couple holes here. There's one at the very top. Then two on either side.
You might not end up being able to use those though. You might have to drill more holes into that to actually get it installed. The mounting brackets for a bolt-on installation would be sold separately, but you can also weld it as well.The outer edge here does have a one inch diameter curved radius, so it gives it a nice finished look. The length from outside edge to outside edge of our fender is 30 inches. Then it stands 13 inches tall.
It does just come as a single fender, so you'll need to get one for either side. It weighs about eight pounds. It's covered by a one-year limited warranty, and it is made in the USA.That really about does it for our look at the single axle trailer fender. I hope this has been helpful in deciding if it's the right one for you. We do have a lot of other options available here at etrailer.com. Check them out. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (2497 Customer Reviews)
9" Wide x 30" long x 13" tall. This sturdy, corrosion-resistant stainless steel fender is excellent for your boat trailer. Slanted back provides extra clearance for your boat. Easily bolt onto your trailer.Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
Nice fender, unfortunately it does not fit. The fender height is not adequate. The fender isn’t long enough and its height doesn’t reach the mounting brackets. I would like to return it can I have a return authorization number?
Poor manufacturing or design on this. It tapers more narrow at the middle and wider and the end so it doesn’t sit properly over the tire
Jenny N.
9/7/2023
Depending on the tire it may be that the next size up will work better for you. I will have the Customer Service team reach out to you.
Love the fenders, they came fast, didn’t like the fact that there was no packing between them. Both fenders had small scratches on them from being stacked together.
Fast service Products great
Before and after pictures Perfect fit high-quality very pleased with the outcome
Larry
1/14/2022
Great still looks like new
Great product, Look great, Fit perfectly. Very happy with the purchase.
Well give it a little time to see if they start rusting up the boat only goes in fresh waterlol
Great product an great customer service
Great service! Fast shipping! Fenders look fantastic upon arrival.
The service was outstanding. The fender on a scale to 1 to 10 it was a 10+ more than expected. It will fit my wants and needs perfect. I was going to design my own fender and make it up myself. This is the exact design that I was looking forward towards. Shipping and handling was a 10 also. Thank you
A little pricey, but fix was exact
Great product, perfect fit and easy to install.
Great product
Good product just took longer than expected for delivery.
nice quality
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
12/4/2023
Of course! I will have our Customer Service team reach out to you to send return instructions.