Summer Starts Here - Save up to 70%
9" Wide x 30" long x 13-1/4" tall. This sturdy, corrosion-resistant stainless steel fender is excellent for your White River Marine boat trailer. Slanted back provides extra clearance for your boat. Easily bolt onto your trailer.
Features:
Specs:
This fender is made of heavy-duty stainless steel, which is highly resistant to rust and corrosion, making it great for boat trailers. The steel is also polished to a brilliant shine. Give your trailer a stylish touch with this fender.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today, we're gonna take a brief look at this replacement single axle trailer fender for your White River Marine trailers. This fender is going to cover one tire on the side of your single axle White River Marine boat trailer. And as you no doubt, no, this fender is going to block road debris from hitting other vehicles and help protect your trailer's cargo. Now the inner edge, as you can see right here, is going to tilt away from your trailer to give you that extra clearance for your boat. And the outer edge here is rounded and it measures one inch wide on this outer edge.
And this fender is made here in the USA of a sturdy for 30 stainless steel. And this is corrosion resistant and this is going to be a bolt-on insulation. I do wanna point out that the mounting brackets are sold separately. Usually, you will want to use your existing mounting hardware if that is possible. And the fender holes that you see here are going to accept the mounting brackets.
Now let me go ahead and lay this down. Again, and I'm gonna pull out my tape measure here and just give you some overall measurements so you can be confident that this is going to work for you. So lining this up here, measuring here at the longest point, we are sitting right at 30 inches long as you can see there. And I'm gonna pull my ruler out here to measure the width for you. So turning this around, measuring it at the widest point here at the bottom, we are sitting right at nine inches wide there at the widest point.
And then at the top, we are a little bit narrower. So lining that up, we are sitting right at seven and 3/4 inches wide. So let me lay this back down here and give you the height. Hitting my tape measure here again, lining this up. We are sitting right at about 13 and 1/4 inches tall.
And this fender weighs about seven pounds. And that's going to conclude our look today. I do hope that it was helpful for you. And again, my name is Andy. Thank you for joining me.
Condition: Surface Scratches
Notes: Minor scratches otherwise fine.
Condition: Surface Scratches
Notes: Minor scratches otherwise fine.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.