Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rust-resistant galvanized steel bracket lets you mount a tail light to your trailer frame. Acts as direct replacement for bracket on CE Smith boat trailer (CE48810). Requires (2) 3/8" carriage bolts (sold separately) for installation.
Features:
Specs:
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Rust-resistant galvanized steel bracket lets you mount a tail light to your trailer frame. Acts as direct replacement for bracket on CE Smith boat trailer (CE48810). Requires (2) 3/8" carriage bolts (sold separately) for installation.Excellent brackets to mount tail lights STL8RB and STL9RB on the back of my boat trailer. I put L brackets on the trailer and attached these to the L brackets. Worked like a charm.
Heavy galvanizing, holes all aligned perfectly with light and existing bracket.
Great bracket. I upgraded the rusted, bent light brackets on the (non CE Smith) boat trailer my dad gave me. I had to drill one hole per side as there was already one hole on each side. I used 3/8" hex bolts instead of the suggested carriage bolts as the carriage bolt square portion extending through the bracket interfered with the ability to mount the bracket to the trailer. The taillight mounting holes lined up perfectly with the existing lights.
These are great brackets for mounting the old style square brake/signal lights to any trailer. I used them this spring on an old boat trailer and liked them so much i bought them again to replace a broken bracket on my utility trailer. They are galvanized steel and rock solid. They have square holes for either 5/16 carriage bolts or regular. They come in pairs.
Theodore
10/25/2021
No problem doing great
Works great and etrailer folks did an outstanding job with quick turnaround and communication…thank you!
Salt water had took a toll on my 15 year old boat trailer, changed leaf springs and U bolts and bunk brackets. Great prices and fast delivery. Parts fit perfect.
Brackets came in today! I opted for priority mail to make sure I had them within the time I needed. They were here within a few days. I just finished putting them on my smoker trailer that was built for me without lights. After searching amazon for brackets, I did a quick google search and found these at a fraction of the price! I had to purchase carriage bolts, lock washers, and nuts at [Hardware store], but I am very well pleased!
Worked perfectly for mounting my lights on my off-road trailer.
Nice quality tail light bracket. Will definitely continue to purchase these from e trailers.
Installed on a 2" box frame trailer. Drilled and tapped holes, threaded the bolts through the square holes and snugged them down. Existing lights fit perfectly, no more wobbly brackets.
Mike R.
8/22/2019
Still attached, still strong
Well built, fit my lights perfectly! I’ve only had them for a few days so I can’t comment on durability but I’ll update if they fail.
These trailer light brackets worked per fectly.
Jon K.
4/16/2020
Brackets are holding up well
The brackets are a heavier metal thats been hot dip galvanized. A quality item.
Chuck
9/23/2021
Holding up fine. The metal is a heavier gauge and is hot dipped rather then just zinc plated, a must around salt water
I have bought several products from etrailer. Trailer fenders, spare tire brackets, tongue jack and retractable stern straps. I've ordered all my parts at different times and all of them have shipped and received to me in a short time. I will be ordering more parts from them on my next trailer project
If your looking for a galvanized taillight bracket - this will do the job. It's not the smooth finish of the aluminium version, but hey, I didn't buy it for that in this case. I actually bought a pair of these to fix my garage door sensors. And I bought the aluminium pair for my actual trailer. But I appreciate the fact they accept 3/8 carriage bolts which helps not needing a second wrench or socket.
Perfect replacement bracket for my PWC trailer. Original bracket broke off, rendering trailer light useless. This bracket was reasonably priced. and easy to install.
This is a solid, 1/8" thick bracket. Much stronger than those that came on trailer kits I've built. It won't bend easily should you back your trailer into something hard, so your tail light might suffer as a result.
hearty bracket, standard holes line up perfectly with tail lights
Good product easily installed however the spring clip connection in the lights are not a solid connection.
Sturdy and simplistic. Worked great to mount tail lights to my 1948 Bantam Trailer.
Fast shipping, excellent service, fantastic communication!!
They look stronger than the stock brackets that came on the trailer.
Worked/fit perfectly on my utility trailer.
Bought several items from etrailer, very happy with all of them. Prices and service are among the best.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gibson
11/21/2023
Still good after several dunkings in salt water. No sign of rust.