Recommended Metal 66" Long Tandem Axle Trailer Fender

Question

Question:

Looking for replacement trailer fenders. 10 3/4” to 11” wide by 66” long by 19 or 20” tall. Prefer stainless but will take regular steel and I’ll get them powder coated.

asked by: Ryan S

0

Expert Reply:

The two best trailer fender options we offer in the size you need are as follows:

Tandem Axle Teardrop Trailer Fenders part # HP44VR - 66" long x 9" wide x 19-3/4" tall -Steel
Tandem Axle Teardrop Trailer Fenders part # HP34VR - 65" long x 9" wide x 15" tall - Stainless Steel

They are both made in the USA options.

expert reply by: Conner L

0

Answer 1

The Tandem Axle Teardrop Trailer Fenders part #HP44VR which are 66" long measure 9" wide. I have attached a photo below.

view full answer...

Answer 2

The Backing Plate for Tandem Axle Trailer Fender #HP82FR you mention is the correct backing plate for both the Tandem Axle Teardrop Trailer Fenders - Rounded Edges #HP94VR and the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers #HP44VR.

view full answer...

Answer 3

The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 #HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33 to 35 inch on center axle spacing.

view full answer...

Answer 4

In regards to the Tandem Axle Teardrop Trailer Fenders for Boat Trailers part #HP34VR, the distance from the center of the mounting holes to the bottom of the fender lip is 4" which you can see in the attached photo.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 12

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Recommended Metal 66" Long Tandem Axle Trailer Fender

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching