Are Tandem Axle Trailer Teardrop Fenders Coated Or Bare Metal

Question

Question:

Just received my tandem axle tear drop fenders item # HP44VR. they look good are they bare mental or are they coated

asked by: Paul D

0

Expert Reply:

I'm glad to hear that you are happy with your Tandem Axle Trailer Teardrop Fenders for 14" to 15" Wheels # HP44VR!

They are cold rolled steel that is bare metal so you will need to prime and paint them, or even have them powder coated to make them corrosion resistant.

expert reply by: Samuel C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 4

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 5

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 6

The modern size equivalent of the 20.5x8-10 that you have currently would be the same size tire that is on the #AM3H340 that you referenced, 205/65-10. As long as the bolt pattern of your current hubs are 4 on 4 inch the wheels of this would bolt up…

view full answer...

Answer 7

To add a second axle to your trailer, apart from the axle you'll need another set of hangers that need to be welded on, another leaf spring,four more U-bolts, an equalizer, four more shackle straps, and eight more shackle bolts. You'll have…

view full answer...

Are Tandem Axle Trailer Teardrop Fenders Coated Or Bare Metal

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching