Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red
Item # RM-152-LED
Our Price: $101.44
Confirmed to Fit
2014 Dodge Grand Caravan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (67)
- Q & A (0)
- Photos
2014 Dodge Grand Caravan - Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red
- Bulb and Socket Kit
- Bypasses Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your Dodge Grand Caravan's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.
Features:
- Tail light kit gives you brake, running and turn signal lights for your towed vehicle without tapping into its wiring
- Bypasses towed car's electrical system completely - wiring is routed beneath the car
- Eliminates concerns of violating the vehicle manufacturer's warranty
- LED lights last longer, burn brighter, and activate faster than incandescent lights
- Red diodes ensure that tail lights show red, not pink
- LEDs generate little heat - no risk of melting lenses
- Independent bulbs and sockets mount inside your tail lights
- Take up less space in tail lights than incandescent bulbs
- Require a 1" hole drilled in tail light housing
- Necessary wiring, 2 bulbs, 2 sockets, zip-ties, and instructions included
- Plug and extension loop for hookup to RV sold separately
- Made in the USA
Specs:
- Wiring harness length: 27'
- Light output per bulb: 450 lumens
- Overall length of bulb: 2-1/2"
- Length of bulb from flange to top of bulb: 2"
- Wire loom:
- Length: 3'
- Diameter: 1/2"
- Limited Lifetime Warranty
Note: Each tail light housing on towed car must have enough room for extra bulb and socket.
152-LED Road Master Tail Light Wiring Kit for Towed Dodge Grand Caravans - LED Bulb and Socket
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red - RM-152-LED
Average Customer Rating: 4.8 out of 5 stars (67 Customer Reviews)
Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.by: DIY Bill09/05/2022
1997 Nissan Pickup
This kit did the job very well. I could have bought each part separately and saved some money, but I went with the comfort knowing all these parts will work together to accomplish the job. I couldn't figure what LED bulb to use for both brake and turn signal. I routed the wire along the truck wiring harness for half the way to the front, then slipped it into the frame channel for the rest of the way. I used a Curt heavy, round 4 pin plug at the front grill. It was a bit of work and took many hours but came out clean!
by: Mark06/09/2023
I installed this on our 2019 Equinox towed. Love the convenience of just plugging in the towed vehicle. The most difficult part was deciding on what part of the light housing to drill the hole for the light socket.
by: Thomas06/29/2022
Loved the product, easy to install and have showed off many times while we wintered in Texas. I would have loved to take the credit for idea but was happy to let them know where I bought from.
Thomas
6/30/2023
No issues. Still looking like it’s newly installed
by: SteveW07/24/2022
Great product. Bulbs were a bit bigger than I had expected but they worked fine.
Stevew
7/24/2023
We had one bulb quit working after a few weeks. I called Roadmaster after diagnosing it and since it was so soon after install they sent a replacement. We were on the road when I noticed it failed I stuck an old 1157 bulb in so I was legal. Being a retired mechanic, I know that a certain percentage of new parts are defective and what makes the difference is how the comapny stands behind their products. I couldnt be more impressed with both eTrailer and Roadmaster. It was also nice that the temporary fix so I could continue my trip was easy and inexpensive. After replacing the bulb the upgrade has continued to work without a problem.
by: NormB02/28/2021
2008 Jeep Liberty
I wanted a tail light system that would operate off of my motorhome, but didn't tie into my towed vehicles wiring. This kit did the trick! Led bulbs are super bright! Kit has everything you need for a smooth install.
Normb
2/28/2022
Still working great. Nice bright lights
by: Gil09/17/2021
The kit should have come with a means to land the wires at the front of the 'toad'. A male connector at the very least.
I should have done more research as the same kit is available in several places for $[XX] as compared to the $[XXX]charged by etrailer.
Brooke M.
9/29/2021
Thank you for leaving a review and for bringing this to our attention. Here is a link to our lowest price pledge. Our customer service team should be reaching out to you in the near future.
Helpful Links
by: Harry F12/28/2019
Kia
I have had these lights installed for over a year. I tow a Kia Nero on a tow dolly with my motorhome. Even though the dolly has tail lights, I wanted my car to have tail and brake lights as well. I installed these lights inside the Kia taillight assembly and spliced them into the dolly wiring harness. The lights work great, very bright. The hardest part was figuring out how to install them inside the taillight assembly since they were not made for the Nero. There was no Nero kit available.
by: Dennis09/12/2019
I bought this item from etrailer and they installed it free at their business. It has worked well. Altho, only one problem. I hooked up today to the motor home, and the turn signal portion on the right side did not work. I am sure it is only a wiring problem. Plan to check it soon. But, would still buy it again. etrailer is a great group of people to work with.
by: Dan S04/04/2019
Great kit. Had to route the wiring in a protective location. Drilling the housing was easy. Good product. Installed a yr ago. No issues. Would buy again.
Dan S.
4/5/2020
Sweet trouble free kit, Wiring too short for a long bed pickup. Soldered and added a 3 extension & works great. Troublefree.
by: Doug H.07/27/2017
2014 GMC Sierra
Installed LED tail light wiring kit (Brake, Tail & Signal) in 2014 GMC Sierra taillights. For towing behind motor home. LED lights are brighter than incandescent. Installation instructions easy to follow.
by: Barry12/22/2019
2019 GMC Canyon
I purchased this taillight option because didn't want to go to the expense of the wiring kit with the diodes, etc. Since I have to disconnect the battery in this vehicle for towing, I needed to use the power from the motorhome trailer plug. I followed the directions and video and the kit was installed as they depicted and it works great. The LED lights are very bright and light up the top half of the taillight assemble which is more than ample.
by: Martin 08/24/2022
GMC Yukon
Easy install just like the tutorial video showed!
I used a step drill from Harbor freight. Allow the bit to do the cutting and it didn't crack my housing.
The hardest part was deciding how to route my cables. Came with enough wire to mount in my GMC Yukon.
by: Richard06/17/2021
The roadmaster tail light kit is an easy DIY kit that comes with all I needed for install on 2012 Chev Colorado . The hardest part was trying to crawl under the truck to run the wires. The lights are seperate from the Colorado and are very bright.
by: Jim 01/01/2020
These lights are BRIGHT! Easy install. I needed about 10 more feet of 4-strand wire, however. Ended up having to splice some together.
Jim H.
1/2/2021
Tail light LED sockets are bright but leak water and condensation in my tail light assembly.
by: Bob 09/30/2021
Very happy with the with the LED Bulb and socket set. A great install job by etrailer, and without messing with the towed vehicles wiring system. Wish this had been around years ago! Stellar,a five star product
by: Mark09/10/2021
2009 Honda CR-V
Not enough wiring! I am about 3 feet short with the brown and white wires. Now I have to stop, go and buy more wire to finish the job. This is on a Honda CRV.
Brooke M.
9/20/2021
Thank you for the review and for bringing this to our attention. Our customer service team should be reaching out to you in the near future.
by: Alam11/13/2018
2005 Mini Cooper
I bought separate LED lights for the brakes light and turn signals of the towed car. I also have a braking system attached to the car that will press on the brake of the car. Question - will the car brake light and the led brake light both come on at the same time and is this a problem.?
Thanks for your help
by: Micheal09/18/2018
2018 Chevrolet Malibu
This product had a great etrailer installation video specifically for my car. the only problem was that there was not enough wire! I had to go to O'Reilly's to buy more wire.
by: Douglas05/17/2022
looks well made will try to install it tommorrow, I like the LED bulbs =, only wish Roadmaster would have included a 4 pole pagtail to plug the finished install into my motorhome. I will need to visit a autp parts store tommorrow for that piece.
by: Gary06/06/2022
So glad I got this kit! Running the wires from front to back was the hardest part. I really liked not splicing into my existing factory lighting wiring.
by: Peggy08/09/2018
2018 Chevrolet Spark
I have always had great customer service with etrailer. Spent a lot of money. I bought the complete towing package for my 2018 Chevy Spark. Everything looks great.
by: Max Whitt01/27/2017
2014 GMC Sierra
Installation was straight forward, and in my situation easy. I have used every system on the market and this system is by far the best if it will fit in your lens. I installed it on a 2014 GMC Sierra which requires the ground cable to be removed when towing, so in my case grounding to the truck was useless - just use the ground from the tow vehicle. Also a 7/8 hole saw works better than the 1" that is called far.
by: David04/25/2018
1989 Jeep Cherokee
Easy to install and no exposed wiring. Make sure you have room in the back of your tail lights for the socket assembly - I should have checked first because I had not a lot of room to work with but in the end they fit just fine.
by: Douglas 10/27/2021
Chevrolet Spark
Wired a 2021 Chevrolet Spark. Good videos availability for help with installation. Several possible methods to route wire from front to back.
by: Otis 10/30/2021
As always the service and delivery was what we have received from the first order years ago up to the latest.
Pricing has always been right, why would we look any other place than ETrailer.
Thanks
25
67
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Base Plates and Needed Equipment to Flat Tow 2019 Chevy Spark LT Behind MotorhomeWe do indeed offer a base plate kit from Roadmaster, they've just released the # RM-523202-4 which is a confirmed fit for your 2019 Chevy Spark LT, but ONLY if its a manual transmission model. To complete your flat towing set up, you'll need the following, a tow bar, a wiring solution, a supplemental braking system, safety cables, a brake light switch kit, and possibly a high/low adapter. For a tow bar, you can't go wrong with the Roadmaster Falcon 2, part number # RM-520. The Falcon...
view full answer... - Can the LED Bulb and Socket Kit # BX88267 be Installed on a 2009 Subaru Forester for Flat TowingWe do have an LED wiring kit just like the Kit # BX8869 that you referenced. It is found as part # BX88267 on our site. You can use the LED kit if your 2009 Subaru Forester does not have LED tail lights and if each tail light housing has enough room for an extra bulb and socket. It could be that there is no room for an extra bulb and socket which would be why the Roadmaster Kit # RM-152-LED isn't confirmed to fit. If you do have LED tail lights (or you don't have enough room for an extra...
view full answer... - Are Curt Base Plates on 2018 Chevy Equinox Compatible With Roadmaster Falcon 2 Tow BarI reached out to Curt, who said you can use the Curt Custom Base Plate Kit # C28FR with your 2018 Chevy Equinox and the Roadmaster Falcon 2 Tow Bar # RM-520 so long as you use an adapter designed for Blue Ox base plates. So what you need is the Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031. As far as the wiring kits on your '18 Equinox (excluding Premier) the LED and standard bulb and socket kits, which are the Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and...
view full answer... - Is Brake Lite Relay Needed When Installing Bulb and Socket Kit on 2009 Ford Escape HybridYes, since your braking system presses the brake pedal of your 2009 Ford Escape and the brake lights come one with the ignition off you need to use a brake lite relay part # RM-88400 so that the LED bulb and socket kit part # RM-152-LED turn signals will still work when the brakes are applied.
view full answer... - Parts Needed to Flat Tow a 2010 Ford Explorer Sport Trac 4x4 Behind a Motor HomeWe have all of the parts you are looking for to flat tow your 2010 Ford Explorer Sport Trac 4x4, however, I did some research on your vehicle and it looks like you may need a Neutral Tow Kit from Ford to complete the flat tow setup for your Sport Trac. I recommend checking your owners manual or contacting Ford for any specific procedures or restrictions on flat towing your vehicle. For a base plate kit, you can use the Demco base plate kit, # DM9518199. They're really concealed and there's...
view full answer... - Parts Needed to Flat Tow 2019 Chevy EquinoxTo properly and safely flat tow your 2019 Chevy Equinox you are going to need a base plate kit, tow bar, safety chains, a wiring kit, a supplemental braking system and likely a high-low adapter. I'll list the best parts for you: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # RM-523193-5 - Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (if the Equinox is a Premier model)...
view full answer...
- Will Roadmaster Sterling Tow Bar Work With Roadmaster Direct-Connect Base Plate On 2020 EquinoxThe Roadmaster Direct-Connect Base Plate Kit # RM-523193-5 you mentioned will work great with the Roadmaster Sterling All Terrain # RM-576 you are interested in with the included pin and clips. You will need to add the RoadMaster 76" Single Hook # RM-645-76 as the included EZ safety cables will not work with the Roadmaster # RM-523193-5 baseplate. To complete your flat tow setup you will also need lighting, and a supplemental brake system. Wiring Kit - Roadmaster Tail Light Wiring Kit...
view full answer... - Bulb With Socket Kits and Wiring Kits For Flat TowingHere is a list of the different bulb and socket kits we currently offer. Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 Blue Ox Tail Light Wiring Kit - Bulb and Socket # BX8869 Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 Roadmaster Tail Light Wiring Kit for Towed Vehicles - LED Bulb and Socket - Red # RM-152-LED Blue Ox Tail Light Wiring Kit for Towed Vehicles - Integrated LED Bulb and Socket - White # BX88269 Blue Ox...
view full answer... - Recommended Wiring to Flat Tow my 2008 Jeep WranglerI have a great option but the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED is not a confirmed fit for your 2008 Jeep Wrangler JK Sahara edition. It comes down to the inserts being too long and interfering with the standard lights. I recommend going with the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56200 it is the best of both worlds it plugs in between the factory connector so you are not splicing into anything but it also doesn't require...
view full answer... - Can 2018 Chevy Equinox be Flat Towed Safely and Part Needed to Flat TowHaving an issue come up 100 miles past the warranty must have really stung so I totally understand your trepidation. That said, you can flat tow a 2018 Chevy Equinox front wheel drive with a 1.5L Gas or 1.6L Diesel as well as the all-wheel drive with a 1.6L Diesel and there should not be any issue with flat towing this car so long as you follow the recommended procedures in the owner's manual to do so (which you can find on page 359 of the online manual). That includes running the vehicle...
view full answer... - Recommended Supplemental Braking System for a 2021 Chevy Equinox Towed by an RV w/ Air BrakesSince your 2007 HR Neptune XL motorhome has air brakes you will want to use the Demco Air Force One Supplemental Braking System item # SM99243 with your 2021 Chevy Equinox. This system has been specifically designed to work with RVs equipped with air brakes like yours. This a proportional braking system that will stop with the same force that you are using to slow or stop your RV. I have linked an installation video below. The Demco SBS Second Vehicle Kit item # SM99209 you were looking...
view full answer... - Will the Roadmaster Tail Light Wiring Kit # RM-152-LED Provide All Lighting Functions Yes, the Roadmaster Tail Light Wiring Kit for Towed Vehicles, # RM-152-LED, will operate tail, stop, and turn signals with one LED blub per side of the vehicle.
view full answer... - Base Plates for 2010 Jeep Grand Cherokee Limited Compatible with Sterling Tow BarRoadmaster Base Plate kit # 1427-1 is a correct fit for your 2010 Jeep Grand Cherokee Limited so long as it is NOT the SRT-8 version and does NOT have a brush guard installed. This is the best choice for use with your Sterling tow bar. Kit # 1427-3 does fit the truck but its safety chain anchor brackets will not work with the Sterling cables. This kit can be made to work but the Sterling's cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the...
view full answer... - Why Won't the Bulb and Socket Tail Light Kit Work On a 2018 Chevy Equinox PremierThe bulb and socket tail light flat-tow wiring harness kits like the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED will not work on a 2018 Chevrolet Equinox Premier because there isn't space inside the housing to mount the bulb and socket because of the LEDs. Therefore, the best option would be a diode kit like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which are much less invasive anyhow. There will be no additional resistors required...
view full answer... - Parts Needed to Flat Tow a 2018 Chevy Spark Behind a MotorhomeAll of the base plates from other manufacturers, Roadmaster and Blue Ox, carry forward from the 2017 to the 2018 Chevy Spark so we can glean from that information that the Demco base plates # DM9519326 will also fit. Please note this fit is for models with a manual transmission and without active air shutters. For a compatible tow bar I recommend the Commander # DM9511012. This is a non-binding tow bar which means that you won't have to be perfectly straight or level to hook up or unhook...
view full answer... - Does Brake Relay Kit Need to Be Installed with Flat Tow Wiring on a 1999 Jeep Cherokee XJThe Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED is designed to wire right into the connector, like part # RM-910030-7, you'll install at the front of your 1999 Jeep Cherokee XJ so it actually bypasses the wiring on your Cherokee altogether. It receives signals and power directly from the motorhome connector. Since this bypasses you factory wiring you won't need a brake light relay kit. Attached are some videos for you to check out - let me know if you have any other...
view full answer... - Can Bulb and Socket Flat Tow Wiring Fit a 1999 Jeep Cherokee SportThe Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED requires a 1" hole to install the bulbs into the tail light housing. It does look like you're limited on spacing inside your housing and when I reached out to my contact at Roadmaster he confirmed that we need to go with a different tail light kit for your setup. I recommend the Universal Hy-Power Diode Wiring Kit # RM-154 if the brake and turn signal are combined on your 1999 Jeep Cherokee Sport, or the Universal Wiring...
view full answer...
- Recommended Base Plates Compatible with 2010 Mini Cooper S HardtopThe Blue Ox base plate # BX1307 is not a confirmed fit from the manufacturer. My recommendation for your Mini S hardtop is the Roadmaster EZ Base Plate Kit - Removable Arms # 521877-1 which has been confirmed to fit. For your tow bar, I recommend the Roadmaster Falcon 2 Tow Bar # RM-520 and then the coiled safety cables # RM-643. For your wiring, I recommend the Roadmaster LED Bulb and Socket Kit # RM-152-LED. This will have you add LED's to your tail light housing for a clean look....
view full answer... - Bulb and Socket Kit for Flat Towing that Uses LED BulbsThere is an LED bulb and socket that you can use for flat towing. It is # RM-152-LED. The LEDs are red which work better than white lights if behind a red lens. I have linked a video showing an example installation for you.
view full answer... - Replacement LED for Roadmaster Tail Light Wiring Kit RM-152-LEDThere is a replacement LED bulb for the Roadmaster Tail Light Wiring Kit # RM-152-LED you have been using with your 2013 Honda CR-V. The correct part is Replacement LED Bulb # RM-300066-10.
view full answer... - Best Supplemental Braking System for Motorhome with Air Brakes Towing a Ram 1500I suggest the Demco Air Force One Supplemental Braking System, # SM99243. This will provide a fully proportional braking system that never needs to be removed from your truck. The actuator will install out of sight and will automatically function when RV and towed truck are connected. I have attached a review video below. If you need the other items, tow bar, base plate, etc. for flat towing your 2017 Ram 1500 I suggest the following: Base Plate, # DM9517335. This is a confirmed...
view full answer... - Are Flat Towing Parts for 2016 Chevy Equinox the Same as 2019 Chevy EquinoxThe parts to flat tow a 2016 Chevy Equinox and 2019 Chevy Equinox are different because the vehicle underwent a style change but if you are looking to flat tow both I'll give you what you need for each, starting with a 2019 Chevy Equinox: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519332 - Tow Bar: Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (if the Equinox is a Premier model) OR Roadmaster...
view full answer... - Can 2018 Chevy Equinox All Wheel Driver Model Be Flat or Dolly TowedAccording to the owner's manual, only Diesel AWD models are capable of being flat towed, and AWD equipped vehicles are not capable of being dolly towed. Otherwise, the only way to tow the vehicle without damage is on a trailer. I've done some research, and haven't been able to locate any references that indicate that shutting off the AWD system would enable the vehicle to be dolly towed, I'm sorry to say. If the vehicle is a Diesel, to flat tow it you'd need a tow bar, base plates, safety...
view full answer... - Does SMI DUO Supplemental Braking System Require Anything Else to Function on 2017 Chevy SonicThe SMI DUO # SM99251 is a confirmed fit for your 2017 Chevy Sonic and will easily allow all of your vehicle taillights to continue functioning like normal. No other parts are needed. We had the chance to install this kit on a similar 2014 Chevy Sonic which I attached a link to the install video for you to check out. When flat towing the vehicle you will need a lighting kit though so that the tow vehicle can control the vehicle taillights. For that the Roadmaster LED bulb and socket kit...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Diy B.
9/6/2023
We took the toad on a 4200 mile trip out West and back. The lights worked perfectly and look nice and bright too!