Replacement LED Bulb for Roadmaster Tail Light Wiring Kit - Qty 1
(4 reviews)
Price: $21.53
Replacement LED Bulb for Roadmaster Tail Light Wiring Kit - Qty 1
Item # RM-300066-10
Our Price: $21.53
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Videos (1)
- Photos
Roadmaster Accessories and Parts - RM-300066-10
- Tow Bar Wiring
- Bulbs and Sockets
- Roadmaster
Replaces the LED bulb from your Roadmaster tail light wiring kit for towed vehicles (RM-152-LED).
Features:
- Replacement LED bulb fits Roadmaster tail light wiring kit (RM-152-LED)
- Light output: 450 lumens
- Red color
- Overall length of bulb: 2-1/2"
- Length of bulb from flange to top of bulb: 2"
- Quantity: 1 bulb (socket not included)
300066-10 Replacement LED Bulb for Road Master Tail Light Wiring Kit (RM-152-LED) - Qty 1
Video of Replacement LED Bulb for Roadmaster Tail Light Wiring Kit - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Roadmaster Tow Bar Wiring RM-300066-10 Review
Speaker 1: Today we' taking a look at the replacement LED bulb for the Roadmaster taillight wiring kit. This unit replaces the LED that fits the Roadmaster taillight wiring kit, part number RM-152-LED. The light output on this unit is 450 lumens. It features numerous red LEDs. The overall length of just the bulb, measuring this component here .. measures two inches.
When it's in the socket, it increases the overall length to two and half inches. Now, with this part number, you just get what's shown. So you just get the bulb. Socket's not included, but I do wanna hook it up to power. So I do have a socket here that the bulb fits into.
Push it down. Rotate it into place. So this is the taillight function. Brakes. Turn signal.
Do that with the lights turned off. Taillight. Brakes. Turn signal. That's gonna do it for today's look at the replacement LED bulb for the Roadmaster taillight wiring kit..
Customer Reviews
Replacement LED Bulb for Roadmaster Tail Light Wiring Kit - Qty 1 - RM-300066-10
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Replaces the LED bulb from your Roadmaster tail light wiring kit for towed vehicles (RM-152-LED).by: Richard06/17/2021
The roadmaster kit had 1 LED bulb that was manufactured badly. etrailer went out of their way to get me a replacement quickly. Thanks etrailer!
by: Sue 06/28/2023
by: Steven 02/28/2023
by: Brack12/31/2021
4
4
See what our Experts say about this Roadmaster Accessories and Parts
- Will the Replacement Bulb and Socket for Blue Ox Tail Light Wiring Kit Fit a1949 Ford Tail LightThe Replacement Bulb and Socket for Blue Ox Tail Light Wiring Kit # 294-0774 is a replacement part for the Blue Ox Tail Light Wiring Kit # BX8869 which is designed to get the signal lights needed for towing your vehicle behind an RV. I have know way of verifying if this would fit the housing in your 1949 Ford, I have included a picture that shows some measurements you can use to try and verify a fitment. You can swap the bulbs out for 1157-compatible LED's like the Replacement LED Bulb...
view full answer...
- Base Plates for 2010 Jeep Grand Cherokee Limited Compatible with Sterling Tow BarRoadmaster Base Plate kit # 1427-1 is a correct fit for your 2010 Jeep Grand Cherokee Limited so long as it is NOT the SRT-8 version and does NOT have a brush guard installed. This is the best choice for use with your Sterling tow bar. Kit # 1427-3 does fit the truck but its safety chain anchor brackets will not work with the Sterling cables. This kit can be made to work but the Sterling's cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the...
view full answer... - Compatibility of Roadmaster LED Bulb with Blue Ox 8869It sounds like you have the Blue Ox Tail Light Wiring Kit # BX8869. You can swap the incandescent bulbs for some 1157-compatible LED's. I reached out to my contact at Roadmaster and the # RM-300066-10 will fit. If you want another option, I recommend the Diamond Vehicle LED light bulb # DI52VR. The bulb is cool white in color.
view full answer... - Replacement LED for Roadmaster Tail Light Wiring Kit RM-152-LEDThere is a replacement LED bulb for the Roadmaster Tail Light Wiring Kit # RM-152-LED you have been using with your 2013 Honda CR-V. The correct part is Replacement LED Bulb # RM-300066-10.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Cole B
Written by:
Shelly K
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.