Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Adding A Front Crossbar To 2013 Ford Transit Connect That Has Rear Rhino-Rack Heavy Duty Crossbar
  Since you only have the single Rhino-Rack Rear Heavy-Duty Crossbar and Legs 50" # RLZ02-DC, you will need to add a different leg kit and another crossbar for the front. You will need Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 50" # RB1250S and Track Mount RLTF Legs # RLTF.
  view full answer...
• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
  view full answer...
• Will Rhino-Rack Track Mount RLTF Legs Flat Mount to RTC16 Tracks
  The Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTF will work out for a flat mounting to the Rhino-Rack RTC-Style Roof Rack Tracksm # RTC16. So you ordered correctly, but you will need to use the included wedges, and once you get the crossbars on with the legs, you'll have a flat mounting surface.
  view full answer...
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• What Are Rhino-Rack RLTF Legs Made Of
  They are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
  view full answer...
• Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
  view full answer...
  
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
  With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
  view full answer...
• Will Rhino-Rack RLTF Roof Rack Legs Fit the Factory Tracks on a 2014 Mercedes Sprinter
  On the Rhino-Rack Track Mount legs # RLTF the square nuts that fit inside the track channel are 3/4 inches wide. Measure the track opening at the bottom where it is the widest. It will need to be 3/4 inches wide or slightly wider to accommodate the RLTF legs. If the tracks on your 2014 Mercedes Sprinter match up then you can use bars # RB1800. If the tracks have different dimensions let me know.
  view full answer...
• What are the Longest Crossbars Available for a Camper with Rhino-Rack Tracks for a Hullavator
  I have a solution for you. First, though, there aren't crossbars that are 88" long. You won't be able to use the Thule Hullavator, part # TH898, but we have another option to help assist loading your kayak. It's the Malone DownLoader, part # MPG114MD, coupled with the Telos XL Load Assist for Malone J-Style Kayak Carriers, part # MPG351XL. This will be a big help getting your kayak loaded on the camper of your 2019 Ford F-250 Super Duty. For the roof system, since you will have Rhino-Rack...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
  view full answer...
  
• Rhino-Rack Roof Rack for a 2018 Mercedes Sprinter 2500 High Roof with No Factory Roof Rack
  Rhino-Rack RT tracks, # RRRTV208 are a great start for your 2018 Mercedes Sprinter 2500 with naked roof. The tracks are compatible with certain leg styles. The legs hold the crossbars and while the tracks will accept different leg styles Rhino-Rack recommends RLTF legs # RLTF with crossbars # RB1800. These tracks will attach to the factory anchor points on the vehicle which means the installation is not as invasive as it could be on other vehicles that do not have anchor points.
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...

Do you have a question about this Roof Rack?