Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This part replaces 1 track nut for your Thule Thule Tracker or Tracker II roof-rack foot. The track nut attaches to the bottom of your roof-rack foot and installs in the track of your factory roof rack.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi, there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the Thule Replacement Track Nut.This is going to be a direct replacement from Thule, so you can trust it's going to work for your setup. You're not going to have to worry about compatibility issues or anything like that. This is going to replace one track nut that originally came with your Thule Tracker II Half Foot Pack, or the Thule Tracker TK6, TK8, or TK9 Roof-Rack Fit Kits. This will attach to the bottom of your Tracker or Tracker II Foot with the bolt that you probably already have.
But if you don't already have it, we do sell it separately here, etrailer, that will fit right in there. Helps to mount your Tracker or Tracker II Foot to the factory roof-rack tracks on your vehicle. So if you are missing one of these track nuts, whether it's been damaged or you've lost it, this is going to be the replacement that you need.So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (132 Customer Reviews)
This part replaces 1 track nut for your Thule Thule Tracker or Tracker II roof-rack foot. The track nut attaches to the bottom of your roof-rack foot and installs in the track of your factory roof rack.
great product, especially when most track nuts require disassembly to install on track, this solves that problem. used on yakima hd cross bars
I was surprised, very pleasantly, that etrailer had the part I needed. It was for a first generation Thule roof rack and I didn’t think anyone would have it. But they did, and James was extremely helpful. Everything worked out so well! Thanks!
These rhombus nuts are hard to find and the shape makes them work really well. I used them for a DIY project for the Thule tracks that came on my truck cap.
I just purchased a new camper shell and one of the optional equipment is the installation of Thule tracks. I already had Yakima cross bars, cargo carrier, ski racks, kayak racks, etc. Well these Thule track nuts fit perfectly onto to my Yakima foots and cross bars. You have saved me from buying a complete new rack system. Thanks again for very quick delivery (ordered on Monday and received on Wednesday). Thanks again.
Hard to find, but worth every penny
Excellent for attaching anything to factory tracks on camper shells. I used them to mount a Smittybilt Defender roof basket to my fiberglass Leer Commercial Cap (heavy duty).
Etrailer has what you need!!!
Good materials and solid.
Worked perfectly!
This diagonal piece of metal fit in the roof rail of my truck cap. I was then able to screw a bracket to it. I was totally awed with how it performed mechanically. It was able to secure itself under the rail and in addition I was able to thread a screw into the threaded hole. Again, a phenomenal piece of engineering.
So pleased that they carried original replacement parts
This is the nut you need if you have a track with accessories attached that you don’t want to bother moving (which requires removing the rivet on the end cap and then reinstalling). With this nut you drop it in anywhere along the track in the narrow orientation and as you tighten it, the nute rotates 90 degrees in the track and locks into place in the wide orientation. I had Thule tracks on my van roof that were used to attach solar panels that I did not want to mess around with removing (it would have required removing end caps, detaching wiring, sliding them out the ends of the tracks, and then putting it all back together). I had Yakima towers and bars on back order and needed to cobble something together for a trip. I was able to order four of these nuts and picked up some M6 bolts at the hardware store to anchor a block of wood that I attached to a wood crossbar. When my Yakima towers arrived I took my temporary wooden rack off and installed the towers using the same nuts instead of the square nuts that came with my towers (this did require me to order 4 more of these nuts as each tower had two anchor points). This is a great product that opens up flexibility for anchoring either your own custom accessories or factory towers from either Thule or Yakima without having to slide the standard rectangular bolts the length of the entire track—you just drop the nut in where you want it.
Great service
I had an extremely difficult time finding the parts I needed until I came across etrailer.com! I got exactly what I needed in a short amount of time and for a very good price. Thank you etrailer!
Michael R.
6/9/2018
Just Perfect!
This product is very handy. I have a truck with a canopy that has roof rack rails that work with both Thule and Yakima racks. My Yakima rack uses the Landing Pads that have rectangular anchor nuts or plates that require removing the end piece and sliding the plates into the track. Unfortunately, the end pieces are screwed through the canopy with the holes waterproofed, making them difficult to remove and re-install. These Thule nuts fit the screws supplied by Yakima and allow installing the Yakima Landing Pads without removing the end pieces. Very Handy. Thanks.
Just what in needed they will fit Yakima tracks . This will allow you to use your old Yakima mounts on new Thule tracks. $8.00 beats the cost of a new set of racks. Be sure to price challenge as they are only $1.00 each on the Thule website
Thule TK1 replacement parts were great. Just like original brackets from manufactured store bought kit. Great customer service and very quick ordering and shipping. Great company to do business with.
The thule products showed up but a nut didn't have threads, no fault of etrailer. I contacted them about the issue. 3 days later i received the part. Etrailer, you guys are great. Thule racks work great also. Thank you.
These work on Yakima Tracks too. They allow you to drop it into the track without removing the end cap which is why I got them. Be sure to get the appropriate screw as the threaded hole is a different size than the Yakima ones. I ordered mine with regular shipping and it came in two days which was three days faster than was estimated!!
I bought this as etrailer and Thule stated that for the 3101 footpack (which is the only current pack that you would use to mount Thule Podiums on their Top Track product) there were no replacement parts. On delivery and inspection, these are the exact same nuts that are used in the 3101 foot pack down to the micron.
I've used this part to attach my self made brackets for a kayak installation. They fit well and slide easily.
James
6/5/2020
The track nuts look good and work well after a year use.
Thanks for the help getting me what I needed for my rack to function.
Part's fit and function was spot on for what I needed. The shipping from etrailer left something to be desired. Part was in stock at time of ordering, order tracking confirms in stock. Order ships 9 days later by usps then arrives to me 8 days after that. 17 days turn around for in stock items, leaves room for improvement.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey
1/4/2024
Still solid