Custom Fit Roof Rack Kit With Y01157 | Y03541 | Y06129 | Y06144 | Y28TR

See what our Experts say about this Yakima Roof Rack

• Does Mounting Kit for Thule Flat Top Ski Carrier Fit Yakima HD Crossbars
  The Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 is designed to work on crossbars that are narrower than 3-3/4 inches, and since the Yakima HD Crossbars like the 55 inch # Y01156 and 60 inch # Y01157 are 3 inches wide, the Mounting Kit will absolutely work with the HD Crossbars. I have added a link below to a video review for you to check out if you'd like of the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998.
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• Adapter Needed To Attach A Yakima Overhaul HD Ladder Rack To A Retrax Tonneau Cover
  If your 2022 Toyota Tacoma has a Retrax tonneau cover like the RetraxONE XR # RTT-60852 or RetraxPRO XR # RTT-80852 that have the accessory T-Slots then you would be able to install the Yakima OverHaul HD Truck Bed Rack # YA24FR using the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. Now that you have the towers connected to the T-Slots of the tonneau cover you can install the Yakima HD Crossbars # Y01157 that you were wanting. I've attached some videos below that will...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• HD Yakima Roof Rack that Fits 2021 Kia Telluride
  The Yakima HD Roof Rack that fits your 2021 Kia Tulluride part numbers # Y01157, # Y28TR, # Y03541, # Y06125, # Y06165 gives you a 60 inch crossbar roof rack which would be enough to fit all of the roof top accessories you mentioned because of the length and the top channel. Some of that depends on the width of the cargo box but I don't believe it would be an issue. The Yakima SkyBox 16 part # Y07335 would work great and is 36 inches wide. The bars are a heavier duty option but are still...
  view full answer...
• Are Yakima HD and Corebar Roof Racks Overkill for 2018 Ford F-150
  I understand exactly what you are asking about. So with anything where there's a weight capacity involved (roof rack, towing, etc.) you are limited by the lowest rated component in the setup as the overall weight capacity. So if your roof capacity is 165 lbs the CoreBar rack part # Y00422, # Y28TR, and # Y06122 would give you the full capacity plus some and the HD Bar rack part numbers # Y01157, # Y28TR, # Y03541, and # Y06122 would be even more.
  view full answer...
• Will a Sears Sport SV 20 Roof Cargo Box mount to a Rhino Rack on a 2018 Acura RDX
  After checking with the manufacturer, I confirmed that for Acura RDX models after 2018, the Sears Sport SV 20 Roof Cargo Box will no longer fit the factory rails. If you do not have any factory roof rails or crossbars, I recommend the Yakima roof rack kit as an attractive and sturdy roof rack system designed to fit bare vehicle roofs. This package consists of # Y01157 Yakima HD Crossbars, # Y00146 BaseLine Towers for Yakima Crossbars, # Y03541 HD Bar SL Adapter for Yakima BaseLine,...
  view full answer...
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Yakima HD Roof Rack For 2023 Toyota RAV4 With Flush Side Rails For 2 Thule Hullavators
  You do have the correct Landing Pad, but you will need the 60 inch Yakima HD bars on your 2023 Toyota RAV4 to use and fit a pair of the Thule Hullavator Pro Kayak Carriers # TH898. Here are all the parts you'll need for the Yakima HD roof rack on your 2023 Toyota RAV4 with flush side rails: - Yakima HD Crossbars - 60" Long # Y01157 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 23 # Y98FR - HD Bar SL Adapter # Y03541 The only other thing I recommend are locks to lock...
  view full answer...
• Best Way To Secure Hobie 9 Sport Kayak on 2022 Toyota Highlander
  I do have an option for you but the best way to secure your kayak would be on the roof with a roof rack and kayak carrier. I recommend the Yakima HD Crossbar System part # Y01157, part # Y28TR, part # Y03541, part # Y06153, and part # Y06132 with the Yakima BigCatch Kayak Carrier part # Y04091. The BigCatch is designed specifically for these larger kayak so it will work great for you. Unfortunately, we don't have any hatch prop options.
  view full answer...
• Can I Fit Four Pair Of J-Style Carriers On Top Of My 2013 GMC Yukon?
  You could possibly fit four of the # S65148 on your roof but it will be a pain to load majority of your kayaks up there. There is a better solution I found that will be more user friendly. You are going to need a large roof rack bar to accommodate your 4 kayaks. I suggest the Yakima 60" HD Bars # Y01157 and If you have factory side rails you will need the Yakima SkyLine Towers # Y53TR along with the Side Rail Adapter # Y03541 and Landing Pad # Y00221. If you have factory raised rails...
  view full answer...
• Ladder Rack for 2016 Ford F-150 5.5 Bed with Pace UltraGroove for Carrying Cargo Carrier
  You can carry the Rhino Rack cargo carrier part # RRRMCB03 above the Pace Edwards UltraGroove # 311-KEFA05A28 you have with channels if you were to install the Yakima OverHaul HD part # YA24FR and # Y01157 to the channels of your cover.
  view full answer...
• Recommended Roof Rack For A 2022 Toyota Highlander XLE
  If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR If...
  view full answer...
• Ladder Rack Compatibility on 2010 Toyota Tundra with Hard Tonneau Cover with Track System
  The Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 will fit on a 2010 Toyota Tundra without the tonneau cover in place but not with it installed. For a track system on a hard tonneau you can use the Yakima Overhaul HD Adjustable Truck Bed Rack # Y01151 which is compatible with the track rails. Then you can use the separate crossbars available in the following lengths: 55"--Y01156 60"--Y01157 68"--Y01158 78"--Y01159 The weight capacity on the rack will be...
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Compatibility of Rhino-Rack Cargo Basket RMCB02 with Yakima HD Crossbars
  The Yakima HD Crossbars like # Y01157 will allow you to use the Rhino-Rack Roof Mounted Steel Cargo Basket - 57" Long x 42" Wide - 165 lbs # RMCB02 if you use longer screws as you referenced as the width of the crossbar will work with the mount, but the depth is 1/4 inches too large for the factory hardware to fit.
  view full answer...
• What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?
  Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
  view full answer...
  
• Can I Use Shorter HD Crossbars On My Yakima OverHaul HD For My 2015 Toyota Tacoma
  Your 2015 Toyota Tacoma's truckbed has two vehicle styles, one with a Deck Rail System and one without. There are two different Yakima ladder racks that are compatible, one for each truck bed option. They are as follows. If your truck has the Deck Rail System, the ladder rack that is compatible is the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks - 500 lbs - 68" Bars, part # Y01151-5868. If you do not have the Deck Rail System on your Tacoma, your ladder rack...
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Weight Capacity of Yakima Roof Rack on 2019 Ford Expedition
  You are correct that the TimberLine Towers # Y33TR limit your weight capacity over the Yakima Crossbars # Y01157, but in this case it is actually your vehicle's roof load capacity that is the real limit. Based on my research, a 2019 Ford Expedition has a roof load capacity of 125 lbs if you have a moonroof and/or 20 inch wheels, otherwise it has a roof load capacity of 200 lbs. Check your vehicle owner's manual to make sure. Since the weight capacity of your vehicle is lower than the capacity...
  view full answer...
• Can the Yakima OutPost HD Truck Bed Ladder Rack Be Used with a Toolbox
  Yes, you can position the uprights on the Yakima OutPost HD Mid-Height Truck Bed Ladder Rack Towers part # Y01152 further in so that you have room for your crossover style toolbox. The crossbar spread is pretty much up to you and what you are carrying. Please note the above system does not come with crossbars so you will need to purchase these separately. For this, we have part # Y01157 for mid-size trucks or part # Y01159 for full-size trucks. If you have a Nissan or Toyota with the track...
  view full answer...
• Parts Needed to Install Longer Crossbar Roof Rack on 2020 Toyota Sienna
  I have a 54 inch crossbar solution from Inno that will work great on your 2020 Toyota Sienna but since the tracks on the bottom of the aero Inno bars that attach them to the rack feet only goes so far across the bar you can't go with longer bars in this style than what's recommended. However the square bar roof racks from Inno attach in a way that does not limit the length of the bars at all. So you could install the 54 inch square bars part # INB137 on your 2020 Toyota Sienna but you'd...
  view full answer...
  
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Crossbar Recommendation For A 2021 Jeep Grand Cherokee W/ A Naked Roof
  For your 2021 Jeep Grand Cherokee, I recommend checking out the: -Yakima JetStream Crossbars # Y00426, with the BaseLine Towers for Yakima Crossbars # Y28TR, and two sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06121. These crossbars have a maximum weight capacity of 165-lbs, measure 60" long x 3-1/8" wide x 1" tall, and have built-in WindRidges that help control air flow over bars to dramatically reduce wind noise and vibration.
  view full answer...
• Fit Kit and Towers for Yakima Crossbars on a 2016 Toyota Prius Prime
  Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime. Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR. You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars.
  view full answer...
• How to Fit Rhino-Rack Pioneer Platform Rack to 2019 Ram 1500 Roof
  I have a roof rack option for you, but unfortunately Rhino Rack does not currently have a Pioneer roof platform system that is designed to install directly onto your 2019 Ram 1500 5th Gen Crew Cab. For a roof rack for your truck, I recommend the Yakima JetStream Crossbars # Y00427 with the Baseline Towers # Y28TR and the Fit Kit # Y06135 because this setup provides an aerodynamic crossbar that has a T-slot to allow for easy installation of accessories. If you want a platform on top of...
  view full answer...
• Can You Install Roof Rack System On 2013 Toyota Camry With Sunroof
  You can definetly install a roof rack system onto your 2013 Toyota Camry with a sunroof. I recommend the Yakima Roof Rack System which consists of four items. Yakima CoreBarCrossbars # Y00421, Yakima BaseLine Towers # Y28TR, Fit Kit # Y06119 and Fit Kit # Y06125. This system will allow you to carry multiple accessories like cargo carriers, kayak carriers, and bike racks on the roof of your vehicle and using the Yakima Same Key System Lock Cores # Y07204 will lock the roof rack to your...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• Which SeaSucker Roof Rack Fits 2018 Tesla Model 3 and How to Lock to Vehicle
  SeaSucker has a roof rack that fits your 2018 Tesla Model 3 but the rack you mentioned is actually not a roof rack and is for carrying a kayak. Instead we have the # 298-SX6000B which is a fit and is compatible with the Thule cargo box you have as well. To lock this you'd want to use the window cable anchor part # 298-BA0010 with a cable lock like # e98891. The anchor gets shut in the window which gives an attachment point for the cable lock to wrap around. This isn't my favorite choice...
  view full answer...
• Roof Rack For 2006 Toyota Camry That Is Compatible With Rhino-Rack Kayak Carrier S512
  The Yakima roof rack that fits your 2006 Toyota Camry naked roof is as follows: -Round Crossbars # Y00409 -Towers # Y28TR -Round Bar Adapters # Y03536 -Fit Kits # Y06121 AND # Y06144 Then you can install the Rhino Rack Carrier # s512 or many other accessories.
  view full answer...
• Bike Rack Recommendation for 2020 Genesis G70 with 2 Carbon Fiber Bikes
  The trunk mount bike rack options for a 2020 Genesis G70 are all hanging style racks and while these will technically get the job done, since you have carbon fiber bikes you want to avoid using a bike rack that will be in contact with your bike frames. Normally I would say go with a trailer hitch and a hitch mount bike rack because they are more cost-effective and easier to use, but there are no trailer hitches that fit your 2020 Genesis G70 so you'll want to go with a roof rack and a...
  view full answer...
• Recommended Roof Rack and BIC Sport TOUGH-TEC SUP Carrier For 2020 Toyota Highlander
  I recommend the Yakima JetStream Crossbars part # Y00426 with the BaseLine Towers for Yakima Crossbars part # Y28TR, fit kit part # Y06153 and part # Y06132 for the 2020 Toyota Highlander. The Yakima JetStream are aerodynamic bars to cut down on wind noise and have a t-track to mount accessories like a SUP board carrier. I recommend the Lockrack Stand-Up Paddle Board Carrier part # LR54FR which has racheting arms so you don't need to worry about tie downs. The Lockrack mounts in the t-track...
  view full answer...
  
• Can I Use the Rhino-Rack Vortex with the Yakima BigCatch Kayak Saddle on a 2019 VW Golf 5 Dr
  I'll try to tackle these in the order you asked them: 1) No, the # RRRS605B will not mount where the plastic tab is and will instead mount 7-7/8" towards the front of the vehicle from the line where the front and rear door meet- the # RRRS605B will clamp into the door jams on your 2019 VW Golf 5dr 2) It's generally a no-go when it comes to opening your moon roof with a roof rack attached to your roof. Luckily this roof rack is fairly easy to install and remove so you'll likely want to...
  view full answer...
• Recommended Roof Rack for 2019 Hyundai Santa Fe with Naked Roof
  If your 2019 Hyundai Santa Fe features a completely naked roof without flush mounted rails that run front to back then I recommend the Yakima JetStream Roof Rack because of its extremely aerodynamic design that allows for both a quiet ride and a really sleek appearance on your brand new vehicle. I also really like the Yakima systems in particular because of their fitting process which consists of them actually installing and testing their roof racks on the vehicle before confirming a...
  view full answer...
• Best Roof Rack for 2019 Ford Focus Hatchback That Doesnt Make Noise
  We have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of: - JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105 The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes the...
  view full answer...
  
• Roof Rack Recommendation for 2018 Honda Pilot that Allows Sunroof to Open Potentially
  With aftermarket roof racks you really don't want to open the sunroof of the vehicle as it will create quite a bit of noise. I checked with other roof rack manufacturers and Yakima, for example, only has the line: If your vehicle is equipped with a sunroof or panoramic glass roof, prior to operation, ensure adequate clearance exists with roof rack and/or accessories installed. So the Yakima JetStream rack part numbers # Y00426, # Y28TR, and # Y06152 would be a great option that has similar...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry with Naked Roof and Class Moon Roof
  For your 2018 Toyota Camry with a naked roof and the glass roof we have the Yakima Roof Rack part numbers # Y00425, # Y28TR, and # Y06192 which is a fit for your roof configuration and as long as you don't open the roof with the rack installed you'd be fine. Inno does not have a rack that fits your vehicle configuration.
  view full answer...
• Recommended Roof Rack for a 2023 Honda HR-V
  Yakima, like all of the roof rack companies, sells their locks separately. To secure a Yakima roof rack to your vehicle you will want the Yakima Same Key System item # Y07204. The price is on the top right side of the product page. The great thing about Yakima's keys being sold separately is you can buy larger packs of keys 6 item # Y07206 or 8 item # Y07208 to secure other Yakima accessories to the roof rack and still only need one key. All of the components of your roof rack will come...
  view full answer...
• Roof Rack and Kayak Carrier for a 2017 Jeep Cherokee
  Many racks will be designed with overhang in mind for a variety of reasons. This can range from intending to have tie-down points for a load to maximizing carrying capacity. I also recommend that people use Aero shaped bars for kayak and watersport applications, as the width of the bars is helpful in controlling and mounting the load. For your roof rack, I recommend a Yakima JetStream kit, consisting of: - Yakima JetStream 50" Crossbars, part # Y00425 - Yakima BaseLine Towers, part...
  view full answer...
• Roof Rack Recommended for 2013 BMW X3 With Bare Roof
  Most X3 models were equipped with the roof rails, so I initially thought you might be out of luck, but after searching around I found that Yakima offers a JetStream roof rack that would work perfectly on the bare roof of your 2013 BMW X3. To assemble the rack, you'll need the following parts: • 50 Inch JetStream crossbars in black as # Y00425 • BaseLine Tower Feet, part # Y28TR • Front Fit Clip # Y06123 • Rear Fit Clip # Y06127
  view full answer...
• Can 58 Round Bars be Used Instead of 48 Bars for a Yakima Roof Rack on a 2008 Mitsubishi Lancer
  Even though the recommended Yakima round bar roof rack combination for you 2008 Mitsubishi Lancer includes the 48" bars # Y00408, you can still use the 58" bars # Y00409 along with the BaseLine Towers # Y28TR, Round bar adapters # Y03536, and BaseClips # Y06180 (you need two sets) for a complete roof rack. The only stipulation when going with longer crossbars is that they are no longer than the side mirrors on your vehicle. If you measure from the edge of one side mirror to the edge of...
  view full answer...
• Roof Rack and Surfboard Carrier Recommendation for 2016 Jeep Grand Cherokee
  First you'll need a roof rack installed on your 2016 Jeep Grand Cherokee if your vehicle does not have one already from the factory. You need crossbars that run from left to right on the roof for a surf board rack to install. So you'll need to look at the rails on the roof of your vehicle that run front to back. If there is a chrome center section on the rail then you have the E Group style rails and you'd want the Yakima roof rack part numbers # Y00421, # Y53TR, and #Y00244 which is an...
  view full answer...
• Roof Rack to Fit a 2014 Toyota Prius to Carry Bikes and Skis
  Since you're looking at a number of components (a roof rack, 4 bike carriers, and a ski carrier) I recommend sticking with one manufacturer for all the pieces so you can have the locks all keyed the same if you choose. For the roof rack I like the Yakima round bar system using the 58 inch crossbars # Y00409, BaseLine Towers # Y28TR, adapter # Y03536, and BaseClip # Y06117. For the bikes a great carrier is the Yakima FrontLoader, part # Y02103. It'll fit on the round bars nicely and a...
  view full answer...
• Which Adapter for Yakima Round Bars on TimberLine Towers for 2021 Kia Telluride
  Yes; we've got just what you're looking for to use your round bars on your new 2021 Kia Telluride. The Roundbar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 will work with the Yakima BaseLine Towers # Y28TR and allow you to use your existing Yakima round bars. You can add metal lock cores to your BaseLine towers with part # Y07204, as well.
  view full answer...
• Best Roof Rack for Carrying 2 Kayaks on a 2016 Ram 1500
  My recommendation would be the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This sturdy, aero bar package reduces wind noise and has a sleek look to compliment your Ram 1500. I also recommend using the etrailer.com J-Style Kayak Carriers part # E98878 for the kayaks you plan on carrying. This carrier comes complete with necessary tie downs you'll need for safe transport that won't scratch your paint. While the recommended Yakima bars...
  view full answer...
• Will Two 32 Wide Kayaks Fit on 60 Crossbars for a 2018 Ford F-150 SuperCrew Cab
  Yes, you will be able to fit both of your 32" kayaks on 60" aero-style crossbars on your 2018 Ford F-150 SuperCrew Cab. To accomplish this I recommend using the Yakima JayLow # Y04073 because it has a 2-kayak weight capacity of 110 lbs and has a very sleek look in the stored position. You will be able to mount your 2 kayaks in the vertical position. If you have crossbars, I recommend making sure that your crossbars do not exceed 3-1/2" x 1-11/16" in order for the clamps on the JayLow to...
  view full answer...
• Cost Effective Roof Rack and Kayak Carrier for a 2019 Hyundai Santa Fe
  The most cost effective roof rack we currently have for your 2019 Hyundai Santa Fe is actually a Yakima RoundBar System which is composed of part # Y00410, part # Y28TR, part # Y03536, part # Y06154, and part # Y06151. The great thing about this system is that the round crossbars can be cut down to the exact length you need. In order to mount your kayaks to the round crossbars I recommend the Rhino-Rack Pads part # RRRWP05. This will be the most cost effective easy to use/remove option...
  view full answer...
• Long Crossbar Roof Rack for 2017 Honda HR-V to Install Thule Hullavator Assisted Kayak Carrier
  The Thule Hullavator part # TH898 can fit aftermarket roof racks like the Rhino Rack you have but the bars of the rack have to stick out past the feet of the rack 4 to 8 inches. If you need a longer crossbar roof rack the longest option we have is the Yakima JetStream bars # Y00425, # Y00145 and # Y06023 which will give you 60 inch long crossbars. To add locks you'd need just the part # Y07204.
  view full answer...
• How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL Denali
  For a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much. Since your kayak is so long, using the Malone...
  view full answer...
• Roof Rack for Roof Tent on a 2019 Ford F-450 Super Duty Crew Cab
  While there are no roof racks that have a weight capacity of 400 lbs, I still believe we have a solution for your 2019 Ford F-450 Super Duty Crew Cab with the Yakima HD roof rack. This consists of the HD Crossbars # Y01157, BaseLine Towers # Y28TR, HD Bar SL Adapter # Y03541, and Fit Kit # Y06185. If you are looking to use a tent that has a 400 lb weight capacity like the Yakima SkyRise HD # Y07436 then you actually just need to make sure that the roof rack is rated for 165 lbs like the...
  view full answer...
• Recommended Roof Rack for Bikes and Surfboards on a 2019 Mini Cooper 2 door
  I recommend Yakima aerodynamic bars part # Y01156 which are designed to cut down on wind noise with their design and wind strip on the top and bottom of the bar. You need RidgeLine towers part # Y00145, adapter part # Y03541 and fit kit part # Y06009. The Yakima HighRoad roof bike rack part # Y02114 allows you to carry 1 bike on the roof of the Mini Cooper. The carrier is a no frame contact carrier so it will not damage the frame of your bike. The pivoting wheel hoops hold the bike by...
  view full answer...
• Roof Rack Needed for 2021 Jeep Grand Cherokee Limited For Thule Hullavator
  For your 2021 Jeep Grand Cherokee that has the flush roof rails that have the chrome center section for a roof rack the Yakima 55 inch HD bar setup part # Y01156, # Y53TR, # Y03541, and # Y00244 would be a really great option with plenty of capacity and bar space for roof top cargo. Now you'd only be able to fit two of the Hullavators part # TH898 based on how much space they take up and how they fold down etc. This rack can easily detach for the Yakima bars as it would fit into the top...
  view full answer...
• How to Fit the Whispbar WB-400 Kayak Carrier on a 2016 Subaru Outback Wagon
  We do have some solutions for you to use a J-Style carrier on your 2016 Subaru Outback Wagon, but if your current crossbars don't have a T-Slot then the (discontinued) Whispbar WB-400 J-Style kayak carrier isn't compatible with your current roof rack system. To use this system with your Outback Wagon you need to upgrade your OEM crossbars to Yakima JetStream or HD crossbars which do use the T-Slots. For a complete roof rack system you need the SkyLine Towers # Y53TR and the Landing Pad...
  view full answer...
• Will Yakima OffGrid Roof Basket Fit 27 Inch Tire & Yakima HighRoad Bike Rack on 16 Subaru Crosstrek
  The medium-sized Yakima OffGrid cargo basket is the Yakima OffGrid Roof Cargo Basket # Y07138. This basket has an inside measurement of 38 inches wide, which is just enough to mount both your 27 inch spare tire with the two parts you mentioned: - Spare Tire Carrier for Yakima Roof Cargo Baskets # Y07076 - Yakima HighRoad Roof Bike Rack # Y02114 The HighRoad measures 9-1/2 inches wide, and combined with the width of your 27 inch spare tire, that takes up 36-1/2 inches of space, so you'll...
  view full answer...
• Off-Road Roof Rack Recommendation for 2019 Jeep Compass
  Basically all of the roof racks aside from the ones offered by Thule have been rated for 165 lbs for your 2019 Jeep Compass. Since you'll be going off-road I recommend going with the Yakima roof rack system that utilizes HD bars: Yakima 55" HD Crossbars - # Y01156 SkyLine Towers - # Y53TR HD Bar SL Adapter - # Y03541 Landing Pad 19 - # Y00245 (these mount to the sides of your raised rails as opposed to inside an opening like what you mentioned) This roof rack is on the higher-end when...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• How To Transfer Crossbars From a 2019 Ford F-350 to a Leer 100RC Topper
  The track systems are all pretty much universal so you can use Yakima accessories in Thule tracks or vice versa. In regards to weight, you will be limited to 165 lbs per set of crossbars no matter which system you choose as that is all the mounting feet can handle, even with the Yakima HD Crossbars System. The vehicle's roof would likely not be able to handle much more than this either. However, you can carry up to 330 lbs total but you would need to distribute the weight so that 165 lbs...
  view full answer...
• High Capacity and Aerodynamic Roof Rack Recommendation for 2019 Honda Pilot
  For a quiet and higher capacity roof rack for your 2019 Honda Pilot for carrying a roof tent the Yakima HD roof rack part numbers # Y01156,# Y53TR, # Y03541, and # Y00245 is the way to go. The bars are aero shaped for quietness and also have the highest weight capacity as well.
  view full answer...
• Thule Hullavator Kayak Carrier Mounting Requirements
  To install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
  view full answer...
  
• What Crossbars Allow Me to Use the Hullavator # TH711420 on My 2022 RAV4 with Flush Rails?
  I recommend looking at the Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156, which also requires Towers # Y53TR, Adapter # Y03541, and Landing Pads # Y98FR. This will fit your 2022 Rav4 with flush factory rails and should give you 4" of crossbar overhang on each side to use the Hullavator. One way you can tell for sure is by measuring from mounting point to mounting point on your roof. If that measurement does not exceed 47 inches, the Hullavator will have enough length.
  view full answer...
• Parts Needed to Install Yakima HD Roof Rack on Camper Shell
  To install a Yakima HD Crossbar roof rack on the bed topper on your Tundra, you'll need the following parts: • 68 Inch HD Crossbar, part # Y95FR (sold individually, so you'll need 2 of them) • Yakima SkyLine roof rack towers, part # Y53TR • Yakima LandingPad 1, part # Y00221 (sold in pairs, so you'll need 2 of them) • Yakima HD crossbar adapters, part # Y03541 • Yakima 54 inch roof tracks, part # Y01127
  view full answer...
• Correct Length of Yakima HD Bars for Retrax XR Tonneau Cover on 2019 Ram 1500
  Thank you for the info! The 68" HD Yakima Crossbars # Y01158 will be what you want to use with the Retrax XR tonneau cover on your 2019 Ram 1500. You mentioned having the SkyLine Towers and SL Adapters but you also need the Landing Pad 1 to fit the towers to your XR rails. Altogether you need the following: 68" HD Crossbars - # Y01158 SkyLine Towers - # Y53TR HD Bar SL Adapter - # Y03541 Landing Pad 1 - # Y00221 (you need 2 of these) Lock Core Set - # Y07204 (optional) Hope this helps!
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ Raised Side Rails
  I would be happy to help you find a set of crossbars that will fit the factory raised rails of your 2023 Kia Sorento. This kit mounts directly to the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR HD Bar SL Adapter for Yakima TimberLine Towers - Qty 4 item # Y03541 This aero bar roof rack...
  view full answer...
  
• HD Yakima Roof Rack that Fits 2021 Kia Telluride
  The Yakima HD Roof Rack that fits your 2021 Kia Tulluride part numbers # Y01157, # Y28TR, # Y03541, # Y06125, # Y06165 gives you a 60 inch crossbar roof rack which would be enough to fit all of the roof top accessories you mentioned because of the length and the top channel. Some of that depends on the width of the cargo box but I don't believe it would be an issue. The Yakima SkyBox 16 part # Y07335 would work great and is 36 inches wide. The bars are a heavier duty option but are still...
  view full answer...
• How to Fit Yakima HD Crossbars on a 2009 Subaru Forester for a Roofnest Sparrow Eye 130 Tent
  I have a great solution for you to get Yakima HD crossbars on your 2009 Subaru Forester with factory raised rails to use with your Roofnest Sparrow Eye 130 tent. Unfortunately, the Evo Raised Rail Feet for Thule Crossbars - Factory Raised Rails # TH710401 only work with Thule-brand crossbars. Sadly, Thule does not make HD crossbars that are compatible with your vehicle. However, with that being said, Yakima does have all the parts you need to mount an HD crossbar system on your raised...
  view full answer...
• Are Yakima HD and Corebar Roof Racks Overkill for 2018 Ford F-150
  I understand exactly what you are asking about. So with anything where there's a weight capacity involved (roof rack, towing, etc.) you are limited by the lowest rated component in the setup as the overall weight capacity. So if your roof capacity is 165 lbs the CoreBar rack part # Y00422, # Y28TR, and # Y06122 would give you the full capacity plus some and the HD Bar rack part numbers # Y01157, # Y28TR, # Y03541, and # Y06122 would be even more.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack of 2018 Subaru Crosstrek
  I did some checking and yes the Thule Hullavator part # TH898 would fit on the Yakima HD roof rack part numbers # Y01156, # Y03541, and # Y33TR.
  view full answer...
• Will a Sears Sport SV 20 Roof Cargo Box mount to a Rhino Rack on a 2018 Acura RDX
  After checking with the manufacturer, I confirmed that for Acura RDX models after 2018, the Sears Sport SV 20 Roof Cargo Box will no longer fit the factory rails. If you do not have any factory roof rails or crossbars, I recommend the Yakima roof rack kit as an attractive and sturdy roof rack system designed to fit bare vehicle roofs. This package consists of # Y01157 Yakima HD Crossbars, # Y00146 BaseLine Towers for Yakima Crossbars, # Y03541 HD Bar SL Adapter for Yakima BaseLine,...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - Aluminum - Black - 55" Long # Y01156 SkyLine Towers for Yakima Crossbars...
  view full answer...
  
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Yakima Parts to Fit American Roll Cover Tonneau Cover on a 2020 Chevy Silverado 1500
  I'd be happy to help! The Yakima SkyLine Towers # Y53TR are compatible directly with the JetStream crossbars so no adapter kit is needed, but if you're installing this over a truck bed you need the Yakima HD bars which do require an adapter. Unfortunately, crossbars and leg systems aren't compatible from one manufacturer to the other so you'll need to stick with Yakima crossbars for your application. If you already have the fit kit (which I believe is 2 of the Landing Pad # Y00221) for...
  view full answer...
• Roof Rack For 2006 Toyota Camry That Is Compatible With Rhino-Rack Kayak Carrier S512
  The Yakima roof rack that fits your 2006 Toyota Camry naked roof is as follows: -Round Crossbars # Y00409 -Towers # Y28TR -Round Bar Adapters # Y03536 -Fit Kits # Y06121 AND # Y06144 Then you can install the Rhino Rack Carrier # s512 or many other accessories.
  view full answer...
• Is There A Thule Roof Rack Fit Kit Available For A 2004 Toyota Camry
  Thule no longer offers a fit kit for a 2004 Toyota Camry so the only option available would be to get an entirely new roof rack system. The only confirmed fits that we currently offer are from Yakima so I have the following component recommendations: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06121 (front) BaseClip Fit Kit for Yakima...
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
  The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kits # Y06144 and # Y06153 - Lock Core Kit # Y07204 This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference. If you let me know what you plan on...
  view full answer...
• Recommendation To Carry Skis and Snowboards on the Roof of 2013 Toyota Corolla
  For your Corolla with a naked roof I recommend the Yakima BaseLine Tower Roof Rack System which would be the Towrs, part # Y28TR, Adapters, part # Y03536, the BaseClips, parts # Y06144 and # Y06153, and the Crossbars, part # Y00408. These parts give you a roof rack with cross bars on the roof of your vehicle. I am including a link to a video review on the Yakima roof rack system. With the roof rack installed you will then be able to use the Yakima FatCat EVO 6 Ski and Snowboard Carrier,...
  view full answer...
• How To Use Yakima Round Crossbars on a 2011 Toyota Corolla
  In order to use Yakima Round Crossbars like part # Y00408 on a 2011 Toyota Corolla you'll need the following: Yakima BaseLine Towers part # Y28TR Yakima Round Bar Adapters part # Y03536 Yakima BaseClip Fit Kit part # Y06144 Yakima BaseClip Fit Kit part # Y06153
  view full answer...
• Compatibility of Yakima Roof Rack System with Dual Sun Roof on 2012 Hyundai Sonata
  According to our friends at Yakima, they offer a roof rack system compatible with your vehicle that can be constructed using the following parts: Round 58 inch CrossBars, part # Y00409 BaseLine Towers, part # Y28TR Round Bar SL Adapter, part # Y03536 BaseClip Fit Kit, part # Y06144 BaseClip Fit Kit, part # Y06153 The towers will sit just above the doors, and will be located to the outside of the roof edge molding. Therefore, they will come into contact with the metal portion of the roof,...
  view full answer...
• Will The 50 Yakima JetStream Cross Bars Fit 2011 Hyundai Sonata
  Yes, you can use the 50" crossbars. The kit you will want to purchase is listed below. Yakima JetStream Crossbars Black Aluminum 50" Long Part # Y00425 BaseLine Towers for Yakima Crossbars w/ Naked Roofs Part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers Part # Y06144 BaseClips and Pads for Yakima Base Line Towers Part # Y06153 This is the entire part list needed to make your kit compatible for your 2011 Hyundai Sonata with the 50" bars you are looking for. I have also...
  view full answer...
• Availability of BaseClip Fit Kit for Yakima Roof Rack 144 b57-5 and 153 b73-5
  The first part number you mentioned is our part # Y06144 and the second is # Y06153.
  view full answer...
• Roof Rack Kit for a 2009 Honda Fit, 2003 Toyota Camry and a 2015 Nissan Sentra
  Though I strongly recommend buying an individual rack for each vehicle, you can build a modular Yakima kit for your three vehicles. I'm recommending Yakima because their crossbars have a full channel on the underside of the bar, letting them be fit to multiple vehicles without needing separate bars. The Toyota Camry requires the longest bar, so you'll fit this bar to the other vehicles. To do this, you'll need the following parts for all three vehicles: Yakima JetStream bar, 60 inches,...
  view full answer...
• Fit and Compatibility of Roof Rack for SportRack Vista XL Cargo Box on a 2013 Toyota Corolla
  I have a solution for you but the Sport Rack # SR1002, which is a confirmed fit for your 2013 Toyota Corolla 4-door, won't allow you to use your SportRack Vista XL Cargo Box # SR7018 because the crossbar spread isn't long enough. Instead I recommend the custom fit Yakima BaseLine Roof Rack which will give you a crossbar spread of 30 inches and the SportRack Vista XL will be able to accommodate. The Yakima roof rack kit is made up of the following parts: Round 48" CrossBars # Y00408 BaseLine...
  view full answer...
  
• Yakima Roof Rack Recommendation for a 2012 Hyundai Sonata
  The only option for installing a Yakima roof rack on your 2012 Hyundai Sonata will be to use the door clamp setup as there isn't a gutter or fixed mounting point option available. You would need the following to complete the rack: Round 58" CrossBars for Yakima Roof Rack System # Y00409 BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06144 BaseClip Fit Kit # Y06153
  view full answer...
• Recommended Roof Rack For 2012 Toyota Highlander With No Side Rails
  I called my contact at Yakima about your 2012 Highlander. They told me the 4 points you said that are on your roof are actually there if you would decide to have the raised side rails installed and are not used as mounting points for a roof rack. The Yakima roof rack we have that is a confirmed fit for your Highlander has three components. To order this roof rack you would need part # Y00426, # Y28TR, and # Y06129.
  view full answer...
• Roof Rack Placement and Recommendations for a 2009 Toyota Venza with Naked Roof
  The roof rack options for a 2009 Toyota Venza include custom fit kits that must be placed in certain locations on the vehicle. The measurements for them are included in the installation instructions. Regarding bar spread (the center to center distance from one crossbar to the other) on your Venza it will be 27-1/2 to 33 inches apart depending on the roof rack you choose. A wider spread offers more stability. For a 33 inch bar spacing I recommend the following set up: Yakima CoreBar Crossbars...
  view full answer...
• Recommended Roof Rack for a 2024 Toyota Corolla Hatchback w/ No Rails or Crossbars
  To add a roof rack to your 2024 Toyota Corolla Hatchback that does not stick over the sides, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y69UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06129 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06131 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
  view full answer...
• What Crossbars do I need to Attach a Thule Hullavator on a 2016 on a 2016 Toyota 4Runner?
  The crossbars you would need can include round, square, aero, elliptical, and most factory crossbars. The Hullavator cannot go on factory bars. With that being said, the Yakima CoreBar Crossbars # Y00421 will allow you to attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The Minimum crossbar spread on the rack is 24 inches, and the Stingray needs to have a maximum width of under 36 inches. Depending on if you have a naked roof, a flush roof, or raised...
  view full answer...
• Is Rhino Rack Roof Rack Compatible with 2011 Toyota Venza with Sunroof
  Sounds like your 2011 Toyota Venza has a panoramic glass roof. Currently Rhino-Rack has no roof rack that is a fit for the panoramic glass roof. However we do have a solution for you. The Yakima roof rack, which consists of parts 58" crossbars # Y00409, BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06129 and # Y06131 is a confirmed fit for your Venza. Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading.
  view full answer...
• 2012 Toyota Venza Panoramic Roof Carrying Weight Capacity
  I wouldn't recommend resting any weight whatsoever directly upon the glass panels that make up the panoramic roof of your Venza. The glass that makes up that sunroof is very expensive to replace. If you're wanting to carry cargo on the roof, your best bet would be to use a Yakima Q-Tower roof rack and a small cargo basket like the Thule # TH859XT. According to Yakima, when installed on the Venza, the roof rack will have a 125 lb capacity and would consist of the following parts: 58 inch...
  view full answer...
• Will Malone Cargo12 Cargo Box # MPG901 Fit a 2018 Ford Ecosport Titanium?
  The Malone Cargo12 Rooftop Cargo Box # MPG901 will fit your 2018 Ford EcoSport if you have a roof rack with crossbar spread within 24" - 28". It will work with all types of crossbar styles. If you need a roof rack, we actually don't have any options available for your vehicle that will work with the required crossbar spread of the Malone Cargo12. For a roof rack, I recommend the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers # Y28TR with BaseClip Fit Kits # Y06129 and #...
  view full answer...
• Yakima Round Bar Roof Rack that Fits 2010 Toyota Highlander
  That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
  view full answer...
• Which Yakima BaseClips Fit 2018 Toyota Tundra
  The correct rear baseclip set for a 2018 Toyota Tundra is the part # Y06129. The front clip is part # Y06121.
  view full answer...
• Yakima CoreBar Roof Rack Installation Measurements for a 2015 Toyota Tundra CrewMax
  When installing a Yakima roof rack on your 2015 Toyota Tundra CrewMax that utilizes the BaseLine Towers, like the Corebar Roof Rack parts # Y00422, # Y28TR, # Y06121, and # Y06129, you want to position the front of the front crossbar 11-3/4" back from the corner of your roof. Then from the front of the front crossbar to the front of the rear crossbar you want to have a distance of 32". This is known as your crossbar spread. Let me know if you have any other questions or if you have a...
  view full answer...
• How Can Thule Hullavator Kayak Carrier Get Installed on 2019 Ford EcoSport with Flush Rails
  If you'd be willing to remove the flush rails on the roof of your 2019 Ford EcoSport so that you could install a naked roof Yakima rack that fits your vehicle like the JetStream kit part # Y00425, # Y28TR, # Y06129, and # Y06169 you'd have a great way to install the Thule Hullavator part # TH898! There isn't an aftermarket roof rack configuration out there though that will fit with the flush rails you have now.
  view full answer...
  
• Will Hullavator Pro Kayak Carrier Fit Thule WingBar Evo Roof Rack on a 2024 Toyota Tundra
  The Thule WingBar Evo system that fits your 2024 Toyota Tundra uses 60" crossbars which are too short to allow enough clearance for the Thule Hullavator Pro # TH898 to keep from hitting your vehicle during use. Instead you'll need to use the Yakima JetStream system and upgrade to larger bars, so you'll need the following parts: - 70" JetStream Crossbars # Y00427 - BaseLine Towers # Y28TR - BaseClips # Y06121 and # Y06129 - Lock Core Kit # Y07204 (optional) These longer bars will give...
  view full answer...
• Roof Rack Recommendation that Fits 2011 Toyota Venza with Sunroof
  Yakima has a roof rack that fits the 2011 Toyota Venza with a naked roof and a sunroof, but Thule does not have any fits so I can't recommend any of them for you. For an aero style roof rack that fits you'd want the Yakima Corebar roof rack part numbers # Y00422, # Y28TR, # Y06129, and # Y06131 which is a confirmed fit.
  view full answer...
• Yakima Roof Rack System For a 2019 Toyota Corolla Hatchback Naked Roof
  You will need the following parts for installing a Yakima roof rack on your 2019 Toyota Corolla hatchback. Yakima JetStream Crossbars # Y00425 BaseClip Fit Kit # Y06129 BaseClip Fit Kit # Y06131 BaseLine Tower # 8880618 Qty: 4 Torque Wrench # 8881045 You can use the Yakima Same Key System to secure the bars. We have a set with 4 Locks # Y07204 to secure just the towers or a set with 8 Locks # Y07208
  view full answer...
• Which Yakima Base Clips for 2011 Toyota Tundra to Use with Existing Yakima Crossbars
  All of the parts you're looking for can be purchased separately, so you can re-use existing crossbars for your 2011 Toyota Tundra. The parts you're looking for that correspond to your BC121 with B-30 clip and #4 Landing pad can be found with Yakima part # Y06129. The BC129 with B-58 clip and #5 landing pad is available with part # Y06121. If you don't already have the Yakima Base Line Towers you can get 4 of those with part # Y28TR.
  view full answer...
• Roof Rack Recommendation for a 2016 Toyota Tundra Crewmax
  Yakima makes a roof rack that is confirmed to fit your 2016 Toyota Tundra Crewmax. For that you would want the part numbers # Y00409, # Y28TR, # Y03536, # Y06121, and # Y06129. Your moonroof would be compatible with this rack. I also was able to get a picture of this rack installed on a Tundra very similar to yours.
  view full answer...
  
• Kayak Carrier Solution for 2019 Tundra Crewmax
  I looked up the tonneau cover you have on your 2019 Toyota Tundra with a 5-1/2 foo bed and the deck rail system and it's going to prevent you from being able to install a ladder rack to carry kayaks since it covers up the tops of the bed rails. So you'd probably best served with a roof rack like the Yakima HD rack part # Y01157, # Y28TR, # Y03541, # Y06121, and # Y06129 for the kayaks and lumber. For a kayak carrier you could then use the JayLow part # Y04073.
  view full answer...
• Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked Roof
  The only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
  view full answer...
• How to Carry Cargo or Use Bike Rack With 2019 Toyota Corolla Hatchback
  While there is a fantastic option to carry cargo with your 2019 Toyota Corolla Hatchback, there are currently no trailer hitches available for this vehicle. If you were looking for a way to haul cargo as opposed to towing with this your car, I strongly recommend a roof rack, which will let you you use the same type of accessories as a hitch, not to mention give your '19 Corolla Hatchback a cool aesthetic. The roof rack I strongly recommend is from Yakima and consists of: - Yakima JetStream...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2021 Toyota Tundra
  Because they're a lot more quiet than square or round profile crossbars, I'd recommend a roof rack with aero-style crossbars. I really like the quality and the ease of use provided by the Yakima JetStream roof rack, which can be assembled from the following parts: • JetStream 60 Inch Aero-Style crossbars part # Y00426 • BaseLine roof rack towers, part # Y28TR • Vehicle specific fit kit # Y06121 • Vehicle specific fit kit # Y06129 A lock kit is available separately as part # Y07204 To...
  view full answer...

Do you have a question about this Roof Rack?