Adapter Needed To Attach A Yakima Overhaul HD Ladder Rack To A Retrax Tonneau Cover

Question

Question:

I have a 2022 Tacoma with 6foot bed and ReTrax cover. I would like to add a Yakima Overhaul with 60inch crossbar. Please supply all part numbers uprights, crossbar, adapter needed for this install thanks

asked by: Ken A

0

Expert Reply:

If your 2022 Toyota Tacoma has a Retrax tonneau cover like the RetraxONE XR # RTT-60852 or RetraxPRO XR # RTT-80852 that have the accessory T-Slots then you would be able to install the Yakima OverHaul HD Truck Bed Rack # YA24FR using the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155.

Now that you have the towers connected to the T-Slots of the tonneau cover you can install the Yakima HD Crossbars # Y01157 that you were wanting.

I've attached some videos below that will help with the installation of these parts as well.

expert reply by: Kevin C

0

Answer 1

The Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5868 you were looking at is compatible with the Utili-Track system in bed of your 2020 Nissan Titan and would be a great option for hauling your kayaks around.…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 5

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 6

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 8

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 9

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 10

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...