Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap
Item # TH29200XT
Retail:$709.49
Our Price: $579.95
You Save: $129.54
Confirmed to Fit
2022 Chevrolet Silverado 3500
Crew Cab
Double Cab
Regular Cab
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Photos
2022 Chevrolet Silverado 3500 - Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap
- Aero Bars
- Camper Shell Systems
- Thule
- Silver
- Overhang
This durable, lightweight aluminum ladder rack mounts to your truck's camper shell. Slotted crossbars allow for quick, simple adjustment of tie-downs and accessories. Load stops included. Carrying capacity depends on that of your truck cap.
Features:
- CapRac lets you carry ladders, lumber and more with ease
- Aerodynamic design reduces drag and wind noise
- Elliptical crossbars are streamlined to minimize wind resistance
- Airfoil trip strips prevent air from whistling through slots
- Quick, simple installation
- Mounting brackets swivel for perfect, easily obtainable fit
- Some drilling is required
- 6000-Series aluminum construction is strong and durable
- Lightweight material won't detract from load rating
- Internal web structure of crossbars increases strength and rigidity
- Slotted crossbars accept wide variety of Thule TracRac accessories
- Additional tie-downs, load stops and more
- Dual-stage powder coat finish adds extra rust protection
- E-coat is followed by a clear coat for improved resistance to scratches
- 4 Heavy-duty, aluminum load stops included - keep ladders, lumber and other cargo in place
- Mount quickly and easily in routed holes of slotted crossbars
- Slide within slots to adjust
- Lock in place with simple twist of a knob
- Made in the USA
Specs:
- Application: truck caps or camper shells
- Carrying capacity: 500 lbs
- Always observe your vehicle's maximum roof load capacity
- Crossbar dimensions: 69" long x 3" wide x 1-1/4" tall
- Mounting bracket height: 4"
- Limited lifetime warranty
Camper Shell Mounting
The corner brackets included with your CapRac ladder rack are designed to securely attach to the roof of your truck's camper shell. Position the rack on the cap and mark the area beneath the mounting brackets - this is where you will drill into your camper shell. Once the brackets are bolted into place, tighten the fasteners on the crossbars to secure the entire rack. Because the brackets are designed to pivot, the tightening process should be painless and everything should fit together quickly and easily.
Thule TracRac Slotted Crossbars
The sturdy aluminum crossbars on all Thule TracRac ladder racks feature integrated slots for mounting and easily adjusting accessories, such as the included load stops. These slots appear on both the top and bottom of the bars for the ultimate in mounting versatility. Like the pieces that mount in the base rails, these accessories also have quick-release knobs that let you loosen and tighten them with a mere twist of a knob so that they can be positioned as needed along the bars.
A built-in trip strip at the front of each crossbar shields the slots from wind, maintaining the aerodynamic quality of the bars and preventing that annoying whistle you often find with slotted bars.
Included Tie-Downs
Included with your CapRac are four tie-down accessories. These load stops are designed to mount in the slots of the crossbars and slide along them for quick, easy adjustment. The bookend-style pieces help to hold ladders and lumber in place on the crossbars. They also have built-in loops for securing tie-down straps.
Sturdy, Rustproof Construction
The CapVan rack system, as well most Thule TracRac accessories, is constructed of durable, lightweight aluminum. Because aluminum is lighter than steel - the material most often used for ladder racks - only a small percentage of your camper shell's capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.
Even though aluminum is already rustproof in itself, Thule TracRac has taken the extra step of adding a dual powder coat finish to further protect your rack. The electrostatic powder coat (e-coat) clings to the metal surface better than traditional paint finishes for a more durable covering. The second coat is a clear finish that adds extra shine and protection from scuffs and scratches.
29200XT Thule TracRac CapRac Camper Shell Ladder Rack
Replaces TracRac TA29200
Installation Details
Customer Satisfaction Score:
77% were satisfied with this product
23% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap - TH29200XT
Average Customer Rating: 4.7 out of 5 stars (14 Customer Reviews)
This durable, lightweight aluminum ladder rack mounts to your truck's camper shell. Slotted crossbars allow for quick, simple adjustment of tie-downs and accessories. Load stops included. Carrying capacity depends on that of your truck cap.by: Tanya 12/26/2021
Volvo
I actually put this on my 1986 Volvo wagon/best work truck ever! And it is awesome. A little custom, but I called previously to ask the sales guys if it would work and they answered all my questions and were super helpful! People get the biggest kick out of seeing this rack get put to good use with heavy loads of wood on my Volvo! Super fun and I would recommend highly!!
by: Priscilla 07/05/2023
I only had two of the small screws vibrated out of the holder bit order a rew extra in case that didn't happen again. Was most def user error lol. I love it. It hold two 1w foot Sun dolphin kayaks, all my ladders for work and is amazing. So happy I purchased it. I would definitely recommend and buy again.
by: Matty D03/09/2022
The racks were easy to install. A second set of hands on the install is recommended. I also added the ratchet strap tie downs which have also worked out great. After a year of use the racks are still looking and functioning as they did on the first day. I have used them to haul lumber, ladders, staging planks and an occasional kayak.
I highly recommend these racks.
by: Brian07/04/2022
So I received this order and it is not compatible to the rail mounts that my ARE topper have. These rails were recommended from ARE when I had the cap made. They said a Thule rack would install with ease with these rails. This rack seemed to be right and your site showed it compatible with my make and model. However it was very difficult getting any specific information and most everyone I talked with or chatted with said they understood my cap as I described it. However i don’t think anyone really did. I have ordered some T bolts that I think might make it possible but I’ll have to modify those as well for all the racks features to work properly. I feel for the price of this rack it should have compatible hardware for different types of roofs. I know this is Thule and not your company but figured you should know. I spoke with Thule and they tried selling me different parts that were outrageous money and when I looked them up they wouldn’t be right either. Not sure why this is so difficult but now I’ve spent more money and several hours modifying things for the right fit. Overall not real happy with this purchase but hopefully it works out.
by: Jeffrey 09/08/2022
2022 Toyota Tacoma
This is an excellent quality product if you need to carry heavy ladders, etc. I have to point out that 69" is clownishly long to put on top of a Toyota Tacoma or other smaller truck, but I'm happy to report that you can cleanly cut the size down with a chop saw fitted with an aluminum cutting blade. The end caps come unattached and I was able to cut off one end of each rail cleanly to where the end caps fit nicely. You can't tell that they were cut shorter with the caps installed.
by: Harry 04/13/2020
2014 Nissan Frontier
First of all, I love the rack. It is very good looking and very easy to install. I looked for months to find a rack suitable for mounting my RIVERSMITH 2 BANGER fly rod holder.
I am so pleased. thank you guys so much!!!!
by: Hugh 02/16/2023
Strong racks that can actually hold stuff. Look good too.
by: Peter B07/29/2019
I really like this rack. It was easy to install and has held up well so far. My only complaint, and the reason for only 3 stars, is that some of the components arrived with some slight dents and scratches, pretty clearly NOT from damage during shipping. Not enough to warrant sending the whole rack back, but enough to be annoying, considering I paid full price.
by: Ty C.08/30/2021
Great product, very solid and heavy duty, looks great and above all functions great for hauling anything from ladders, lumber, to paddle boards.
by: Dan N. 07/04/2019
Works great.
by: Ron Y10/21/2019
Wonderful. Exceeding my expectations.
by: 01/26/2023
by: Daniel 09/13/2023
by: David 11/19/2022
by: Randy in Maine06/07/2016
I just installed the CapRak on my cap last night on my 2002 Tundra. It took about 1.5 hours to do by myself. Nice hardware. Everything fits well and the finish quality is very good. I will be using this to transport a couple of 14' long kayaks (using my Thule Hullaports) and a 18' long Sawyer canoe all over Maine and beyond with this set up. They will be very stable up there.
Sometimes I also have to bring some 16' boards to my woodshop and todays truck beds are just not suitable for that kind of haul.
I also bought the 6 foot "cargobuckle" straps to secure the loads, and they look very well made also.
I am going to buy another CapRak from my popup tent trailer soon. good product and well worth the money.
by: Chas01/18/2017
What etrailer does is make it as easy as possible to do it yourself. Between the written instructions and the videos on how to install you are covered. Remember that you do have to have tools and it is not always as easy as it shows on the video. There recommendations are spot on and their individual responses to questions are good. They could improve on several areas. Most people do not have the flexible sewing like tape measure. For putting on roof racks it is essential. Also you will need to lube the bolts for the roof racks or they will seize up while putting on the lock nuts. The packaging for the trailer hitches is sub par. One hitch arrived damaged and the next one also was sticking through the box but mostly undamaged. I imagine it is to keep the shipping costs down. Customer service has also been good. I Ordered a hitch, roof rack and basket and am satisfied.
by: dave b01/11/2015
Great up grade from my old rack. Will be much more secure for tying down ladders. Eyelets on sliding brackets and the brackets themselves are a great feature. Very pleased. Its not a negative but the tubes are a little long for the look I want on my truck. I may try trimming them down. Shipping was 3 days and ordering was a breeze.
by: Dale L.06/27/2014
I love the rack. It was simple to install. It's sturdy, easy to use, and it looks great!
by: Peter f04/02/2014
Great product. Very sturdy construction and easily installed. Looks very nice on my cap!
by: Juan C09/26/2014
Great product!! Fast delivery
20
20
See what our Experts say about this Thule Roof Rack
- Recommended Truck Cap Rack for 2014 Ram 1500 Short BedThe best solution for a ladder rack to use with a truck that has a truck topper/canopy/camper shell on your 2014 Ram 1500 short bed would be the Thule TracRac CapRack # TH29200XT. This rack comes with load stops included, so it's ready to carry lumber or ladders right out of the box.
view full answer... - Will the Thule TracRac Fit On A Truck Bed CapThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap part # TH29200XT will attach directly to the truck bed cap via drilling (unavoidable) and provide you with the maximum weight capacity possible which will be determined by the truck bed cap manufacturer. I have attached an install photo for you as well but on a fiberglass truck bed cap.
view full answer...
- Camper Shell Roof Rack and Kayak Carrier Recommendation for 2002 Chevy SilveradoBest option would be the TracRac CapRac part # TH29200XT. This has more than enough capacity and would easily carry a 12 foot long camper. Going with a truck cab roof rack would be to a bit overkill and would honestly not work as easily as you'd think since the crossbar height would most likely be different. The Malone Kayak Carrier part # MPG1001 would then be a great solution as it is a kayak carrier that is designed to fit channels like what the CapRac has.
view full answer... - Was There a Change Between Newer and Older Model TracRac CapRac Ladder RackThule basically purchased TracRac and changed the part numbers but not the actual bars themselves. So if you have the older TA29200 the # TH29200XT is the exact same. Just the feet of this is not available as a replacement part.
view full answer... - Fitment of the Yakima TopWater Rooftop Fishing Rod Carrier to Thule TracRacThe Yakima TopWater Rooftop Fishing Rod Carrier, # Y04088 has a universal crossbar mount. Yes, it will mount to the Thule TracRac CapRac, # TH29200XT, Thule TracRac TracONE Truck Bed Ladder Rack, # TH27000XTB and other models of the Thule TracRac.
view full answer... - Inexpensive Roof Rack for a Camper Shell with TracksI do have an option for you but the Yakima Q-Towers cannot be mounted to a set of tracks or directly to the roof. These towers are only designed for bare roofs which they attach to with door clips. For a cost effective roof rack that will work with the tracks on your camper shell you can use the Rhino-Rack Roof Rack for Factory Tracks part # Y02-480B-NT which has 54" long crossbars so your tracks will need to be between at least 42" apart. That said, if you want to remove the tracks and...
view full answer... - Roof Rack for Top of Camper Shell RecommendationWe have roof rack setups that are designed for truck cap applications like yours but the SportRack # SR1020 would not be what you'd want as it's attachment method was not intended for the fiberglass roof of a camper shell. Instead we have the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT which is designed for your exact situation and would work great. It has a reinforced mounting bracket setup to allow it to be strong enough for use on a camper shell that's made...
view full answer...
- Compatible Thule TracRac For A 2008 Toyota Tundra With Camper Shell For your 2008 Toyota Tundra you'll want the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT instead of the Thule TracRac TracVan ES Van Ladder Rack - 2 Bar - 500lbs # TH29610XT you were looking at. This durable, lightweight aluminum ladder rack mounts directly to your truck's camper shell. The slotted crossbars allow for quick, simple adjustment of tie-downs and accessories with load stops included. The maximum carrying capacity depends on that of your camper shell...
view full answer... - Will Thule Hullavator Work With Thule TracRac CapRac Ladder RackSo long as you have spread the crossbars of your Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT at least 24" apart and the edge of the CapRac bars are between 4" and 8" apart from the rack's feet then yes, you will be able to mount the Thule Hullavator Pro Kayak Carrier # TH898 to this rack. Just make sure you remove the load stops of your CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT to ensure there is no interference with the Hullavator # TH898. I...
view full answer... - Ladder Rack Solution for Truck Bed with Camper Shell/Topper InstalledFor truck bed toppers/camper shells we have ladder racks that were designed to attach to the roof of them like the TracRac CapRac part # TH29200XT but there isn't a way to attach a ladder rack that attaches to the top of truck bed rails like the # 3371501400 that you referenced. I attached a picture of what the CarRac looks like installed on a camper shell for you to check out as well.
view full answer...
- Roof Rack Needed for Cap/Camper on a Ford RangerAre you looking for an adjustable ladder rack or one that you install in a specific spot permanently? Either way it actually is a custom fit that the customer gets to pick where they would like everything to sit. Typically you will see the legs of the roof rack near the corners of the truck cap/camper, but it can vary depending on the application. For the 6' bed on your Ford Ranger I recommend the Thule TracRac CapRac Ladder Rack # TH29200XT which includes 65" long crossbars. The weight...
view full answer... - Roof Rack that Can Fit Tracks of 2021 NuCamp T@G XL BoondockThe roof rack/ladder rack setup you are going to need for your 2021 NuCamp T@G XL Boondock is the Thule TracRac CapRac part # TH29200XT as it has 69 inch crossbars. Since your tracks are 65 inches apart there isn't a Rhino Rack setup that would have a long enough crossbar setup.
view full answer...
- Could Thule TracRac CapRac Ladder Rack Attach to Tonneau CoverThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT could attach to the tonneau cover you have on your 2013 Chevy Avalanche using the included hardware. This is compatible with Thule bike racks as well. The feet of this rack are not compatible with just the bars you have now.
view full answer... - Ladder Rack Recommendation for 2018 Ford F-150 with Camper Shell We have just what you need! The Thule TracRac CapRac part # TH29200XT is confirmed as a fit for a camper shell on a 2018 Ford F-150 and would work great. It also fits all bed lengths too based on how it installs. This rack has heavy-duty aero shaped crossbars and includes load stops. The capacity of the rack will basically be whatever the capacity of the camper shell is.
view full answer...
- Roof Rack Recommendation for my Are Truck Camper or CapI really like the Rhino-Rack Aero Bar Roof Rack for Camper Shells part # Y02-500B for 65" or part # Y02-480B for the 54". These will give you the crossbars you need to attach your Hullivator to as well as any other roof ounted accessory should you need it. This unlike the other will allow you to adjust the bars closer or further apart to allow for different goodies. The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap part # TH29200XT is not a bad choice it's bars are just too...
view full answer... - TracRac CapRac for 2016 Chevy Silverado 3500 With Camper ShellI contacted Thule for you to find out if it was possible to use the crossbar of the TracRac TracONE ladder rack with the hardware for the CapRac, but they told me they are not compatible. The reason is, the crossbars of the two systems are entirely different in regards to how they mount. So to use a ladder rack on the camper shell of your 2016 Chevy Silverado 3500 you would need a new system, the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT. I've added a link...
view full answer... - Will Thule TracRac CapRac Fit on Tracks of Leer CanopyYes, the Thule TracRac CapRac part # TH29200XT would fit the tracks on your Leer canopy. That's basically what this rack was designed to for.
view full answer... - Recommended Ladder Rack for Truck Bed CapI do have options for you but we don't offer any traditional truck bed ladder racks compatible with a truck bed cap that attach to the bed. That said, we do offer crossbars which mount to the top of the truck bed cap you can haul and store gear on. The only downside of this option is that you're limited to the weight capacity of the truck cap's roof. I recommend the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap part # TH29200XT which has lightweight but strong aluminum bars...
view full answer... - Solution to Carry 2 Kayaks/SUPs on 2015 Toyota Tundra with Truck Bed CapAfter doing a bit of research, I've come with a couple of options for you. To install a roof rack on top of your truck bed cap or camper shell, I recommend the Thule TracRac CapRac # TH29200XT. This will provide the crossbars needed to attach a roof mounted kayak or SUP carrier. This system has a capacity of 500 lbs but your limiting factor will be the capacity of whichever bed cap you end up going with. Your best option for a kayak carrier with load assist is the Malone DownLoader Kayak...
view full answer...
- Compatibility of the TracRac CapRac Ladder Rack on a 2013 Toyota Tacoma with Leer Fiberglass CapThe TracRac CapRac Ladder Rack, # TH29200XT, will work well on the Leer cap on your 2013 Toyota Tacoma. The CapRac includes mounting brackets that will attach the rack to the top of your fiberglass shell. There will be some drilling required to install the brackets. The TracRac CapRac crossbars measure 65 inches in length and elliptical design will reduce wind drag and wind noise.
view full answer... - Recommended Roof Rack for Leer 122 High Rise Truck CapYou were on the right track with the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT. The Leer 122 High Rise camper shell really isn't ideal for mounting a roof rack, because of the odd shape taking away probably 2 feet of space at the front of the cap, so you'll want to make sure you have 27-1/2" (center of front bar to center of rear bar) and 27-1/2" side to side to install these crossbars. As long as you've got the ability to space the bars and towers at this...
view full answer...
- Recommended Options for Adding Roof Rack/Ladder Rack on Toyota Tacoma Shell TopWe have a couple of options for you to add crossbars to the shell of your Toyota Tacoma. As you noted, these roof rack/ladder rack options will require drilling into the shell on your Tacoma to bold the rack to the top of the shell. One options to provide a rack on your Tacoma's shell is the TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT. I recommend this ladder rack because it is made from a durable aluminum construction and includeds 4 heavy-duty aluminum load stops...
view full answer... - Recommended Roof Rack to Work with Hullavator on Leer Truck Cap We do have a nice selection of ladder racks that are designed to mount to the top of a truck cap like what you have, such as the Thule TracRac # TH29200XT, however we do not have a ladder rack available that installs on the outside of the bed rails to allow it to fit with a cap or cover. In researching the type of ladder rack that you described, it also doesn't appear that they would be compatible with the Thule Hullavator Kayak Carrier # TH898, as they do not feature crossbars that extend...
view full answer... - Ladder Rack Recommendation for a 2003 Ford F-150 with Bed CapThe Bully Adjustable Ladder Rack for Full-Size and Compact Trucks # CG-902 is width adjustable and is confirmed to fit the truck bed rails of your 2003 Ford F-150 but since you have a truck bed cap it would not be the correct product for you. For a ladder rack confirmed to fit your truck with a bed cap you would want the TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT. This has been confirmed to fit your vehicle and should work well.
view full answer...
Do you have a question about this Roof Rack?
Thule Accessories
Fit to this rack on your 2022 Chevrolet Silverado 3500
Info for this part was:
Installed by:
Andrew K
Edited by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Written by:
Matthew S
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dan N.
7/5/2020
Has not leaked and seems to bear loads well. Takes about 10 minutes to remove from roof when going away and need to park in garage. Only issue is slide nuts freeze up. Wd40 seems to free them up.