Will the Thule TracRac Fit On A Truck Bed Cap

Question

Question:

Will this fit over a truck bed cap?

asked by: Tim P

0

Expert Reply:

The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap part # TH29200XT will attach directly to the truck bed cap via drilling (unavoidable) and provide you with the maximum weight capacity possible which will be determined by the truck bed cap manufacturer.

I have attached an install photo for you as well but on a fiberglass truck bed cap.

expert reply by: Conner L

0

click to enlarge

Answer 1

I would be happy to help! The Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks - 500 lbs - 68" Bars #Y01151-5868 which includes the #Y01168 you were looking at for your 2010 Nissan Frontier King Cab with the 6-1/2'…

view full answer...

Answer 2

Yes, all other components for the TracRac CapRac Ladder Rack, #TH29200XT, can be removed while leaving the swivel brackets in place. I have included a snapshot of the installation guide to show how the rack corner attaches to the swivel bracket. All…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Will the Thule TracRac Fit On A Truck Bed Cap

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching