Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac - Qty 4
(112 reviews)
Price: $94.95
In Stock
Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac - Qty 4
Item # 753-3761
Our Price: $94.95
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (112)
- Q & A (0)
- Photos
- Used (2)
Thule Accessories and Parts - 753-3761
- Ladder Racks
- Load Stops
- Thule Pro
- Thule
Replaces 4 of the load stops that came with your Thule AeroBlade load bars, Xsporter ladder racks, Xsporter Pro ladder racks, or Thule TracRac CapRac ladder rack.
Features:
- Replaces the load stops that came with your Thule AeroBlade load bars, Xsporter ladder rack, or Thule TracRac CapRack ladder rack
- AeroBlade: THARB43, THARB47, THARB53, or THARB60
- Xsporter ladder racks TH422XT or TH500
- Xsporter Pro ladder racks: TH500XT, TH500XTB, TH500XT-XK3, TH500XT-XK4, TH500XTB-THXK3, TH500XTB-THXK4B, 500010, or 500011
- Thule TracRac CapRac ladder racks: TH29200XT
- Quantity: 4 load stops
Fits:
- AeroBlade: THARB43, THARB47, THARB53, or THARB60
- Xsporter ladder racks TH422XT or TH500
- Xsporter Pro ladder racks: TH500XT, TH500XTB, TH500XT-XK3, TH500XT-XK4, TH500XTB-THXK3, TH500XTB-THXK4B, 500010, or 500011
- Thule TracRac CapRac ladder racks: TH29200XT
502 Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, or Thule TracRac CapRac - Qty 4
Replaces Thule 7533761 REPL
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac - Qty 4 - 753-3761
Average Customer Rating: 4.7 out of 5 stars (112 Customer Reviews)
Replaces 4 of the load stops that came with your Thule AeroBlade load bars, Xsporter ladder racks, Xsporter Pro ladder racks, or Thule TracRac CapRac ladder rack.by: Andrew 06/16/2023
Perfect. Wonderful to be able to find quality parts for our Thule rack!
by: Orozco,11/30/2022
These load stops do not fit the ladder rack they were purchased for. they are about 1/16 over so they do not slide into the rack. They can be ground to fit, but why should they have to be manipulated by the customer?
by: Arturo Lomeli11/27/2019
Great products, I combined few different brands of products and I was able to get what I had in mind, no problems after a year, I will definitely buy from etrailer again.
by: Benjamin 07/25/2023
Work great for ladder tie down.s
by: Michael09/09/2022
Does not fit ractrac latter rack. Poor advertising ????
Mike L.
9/15/2022
The ladder racks are a confirmed fit for the following racks: AeroBlade: THARB43, THARB47, THARB53, or THARB60 Xsporter ladder racks TH422XT or TH500 Xsporter Pro ladder racks: TH500XT, TH500XTB, TH500XT-XK3, TH500XT-XK4, TH500XTB-THXK3, TH500XTB-THXK4B, 500010, or 500011 Thule TracRac CapRac ladder racks: TH29200XT If you have a different rack, the load stops will not be compatible.
by: Dave 09/18/2023
Perfect fit, just what I wanted.
by: William04/30/2016
I have bought Thule replacement load stops from a truck accessories store in the past and had to return them. They would not fit the track recess. They were from my original purchase of the Thule contractor series roof rack for my truck about 8 years ago. The clerk told me that I could file them down and they would work?! Thule supposedly quit making the Contractor series and parts were not available. Needless to say I returned them. I recently began my search again and found these online. I was a little apprehensive on ordering blind, but when they arrived, they fit like a glove. I would highly recommend these.
by: Sherman 07/25/2021
I have just installed them on my Yakima overhaul hd bars and they fit as they should, and arrived on time, the Yakima load stops were several months behind so they suggested the Thule that were in stock and a few dollars less than the Yakima
by: Peter03/28/2022
I trailer a 25.5 foot power catamaran, and I carry multiple kayaks on the Thule ladder rack that I purchased from etrailer. So this is the fifth or sixth time that I have purchased trailer parts rack systems attachments through etailer.
I could not be more pleased with the quality of the parts and the level of service. They are responsive to orders and will pick up the phone if you have a question. I will certainly continue to use them for all of my trailer and roof rack system needs!
by: Matt 12/28/2019
They are what they should be. Great anchor points. Solid construction that works seamlessly with my Yakima rack for ladders, lumber, etc. My second set for a new truck. Used my last set with my trac-rack
by: Robert03/15/2013
Thule, you REALLY need to promote these as canoe stabilizers too. You have canoe stabilizers for your square racks (lower design though) and the items you advertise as "kayak and canoe holders" require the canoe to be carried open side up. No one carries canoes open side up except newbies who want to look silly. Plus, the aerodynamics of a canoe carried open side up actually create lift, putting extra strain on the Thule rack and tie downs. Come on, guys, either cross promote these fine "ladder racks" as canoe carriers or create a canoe L bracket for the Aero bars similar to the ones you have and market for your square bars
by: David .L10/02/2016
It is awesome ETRAILER sells parts for Thule racks ,the load stops are a great product unfortunately the finish didn't hold up ,after one year in a high humidity climate most of the finish has peeled and corrosion is eating the rest of the load stops it would be great if they could cut the price in half on these and you could just replace them every 8 months ,the racks only come with one set for front and one set for the back ,I just realized it would be handy to have two sets for hauling ladders and as many as 4 sets for hauling lumber so despite the corrosion issues I'm going to buy more ETRAILER is one of the fastest shippers I have had the pleasure of ordering from ,I just received the second set it is going to make hauling two ladders so much more convenient
by: Mike S.04/12/2016
Works and fits perfectly in my My Thule XPorter 422 rack. OEM fit and finish! Great product and awesome service from etrailer. They provide exactly what is stated.
by: Andy11/17/2021
they DO NOT fit!!!!
tried them on three different Trac Rac systems....
they wont fit in the slots.....
DO NOT waste your time getting these!!!
Sierra K.
12/1/2021
These load stops fit the Thule TracRac CapRac ladder rack item # TH29200XT. If you have the old-style TracRac ladder rack or TracRac CapRac ladder rack the the load stops are no longer available.
Helpful Links
by: Don 06/05/2023
Better than the old ones I used to use.
by: Duke01/03/2014
After much searching on the web, I found exactly what I was looking for.
It will replace some missing ( stolen? ) parts to my Thule Rack.
Thank you for your quick processing and delivery.
I will be doing busness with you in the future.
by: Gary02/09/2019
the product from etrailer was described exactly as what was ordered and works exactly as described. shipping and the ordering process went smoothly. over all i am very happy with this purchase.
by: Ken 07/15/2020
Good product, However, I had to modify them to fit my rack. I guess older racks are a little different. The pieces that slide into the track on the rail were too large. Using a metal grinding tool I was able to cut and grind them down to fit.
by: Chip08/15/2015
So much easier for holding ladders and the canoe on the Thule rack
by: Thomas03/12/2020
So grateful for Allison's help the other day. I damaged the stops on our kayak rack, and she was able to find replacement parts for me. I appreciated her courtesy and concern.
by: Lawrence07/22/2021
Lost one to an overhead bar at short term parking at airport.
by: Timothy11/30/2021
They don't fit in my trac rac must retu rn
Sierra K.
12/1/2021
This item fits the Thule TracRac CapRac ladder rack item # TH29200XT. If you have the old-style TracRac ladder rack or TracRac CapRac ladder rack then the load stops are no longer available.
Helpful Links
by: Dennis 03/01/2023
Well made and the system works better than expected.
25
112
Show More Reviews
See what our Experts say about this Thule Accessories and Parts
- Will Any Load Stops Work With the OEM Crossbars on a 2020 Kia SorrentoIt's not likely Andrew, since load stops like the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac # 753-3761 are only going to work with certain Thule crossbars. I wasn't able to find out who makes the OEM crossbars for your Sorrento so you'd need to figure that out first. Once you find out what bars you have, let us know and we'd be happy to help.
view full answer... - How to Determine if the Thule Loadstops 753-3761 would Fit Non-Thule CrossbarsI spoke with my contact at Thule and the first thing she said is that the Load Stops part # 753-3761 that you referenced have only been tested to fit the Thule Aeroblade cross bars. However, the T-bolts of the # 753-3761 are .75 inches square. You would need to measure the dimensions of the channels on your Mini Countryman to determine if these would fit.
view full answer... - Availability of Load Stops to Fit T-Slots of Factory Roof RackMost roof rack T-slots are right at 3/4 of an inch wide at the base of them. If the slots on your crossbars are right at 3/4 of an inch wide at the base you could use the part # 753-3761 to fit in them.
view full answer... - Recommended C-Channel Load Stops That Fit 2015 Sprinter Factory Roof Rack If your Thule rack fits in the C-channel of the roof rack on your 2015 Sprinter, then the Thule load stops, part # 753-3761 will work great for you. These load stops fit the Thule AeroBlade load bars. If the rack you said you have from Thule will fit AeroBlade load bars then this will work well.
view full answer... - Height of the Load Stops for Thule Aeroblade Load Bars, Ladder Racks, or Thule TracRac CapRacThe Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, or Thule TracRac CapRac # 753-3761 will sit 5" above the crossbars. The 5" height does not include that piece that sits inside the T-Slot of the crossbar so it will just be the actual load stop that is the 5" height (see attached).
view full answer...
- TracRac Crossbar Load Stop Recommendation We have load stops that fit the TracRac ladder racks, but the specific part number you mentioned is no longer available. What you need is the Replacement Load Stops # 753-3761 and you'll be set.
view full answer... - Thule Load Stop Fit with Rhino Rack Vortex Bar T-SlotThe Load Stops for Thule Ladder Rack and Aeroblade Load Bars - Qty 4 # 753-3761 will fit the t-slots on your Rhino Rack Vortex load bars. The companies do not confirm fits or test them together, but they do physically fit.
view full answer... - Would the Load Stops for Thule Ladder Rack and Aeroblade Load Bars # 753-3761 Other Brand AerobarsI spoke with my contact at Thule and the first thing she said is that the Load Stops part # 753-3761 that you referenced have only been tested to fit the Thule Aeroblade cross bars. However, the T-bolts of the # 753-3761 are .75 inches square which would fit well in the slot you have on your bars that measures .875 of an inch.
view full answer...
- Potentioal Load Stops to fit 2002 Volkswagen Jetta Roof RackYou are going to have to measure the size of the t-slots to know if we have load stops that would fit. The Thule Load Stops T-bolts # 753-3761 are 3/4 inches square (0.75). If you measure the T-slots of your rack and these would fit this would be a great option.
view full answer... - Can Thule Aero Bar Load Stops Fit Yakima HD Bar ChannelsThe Thule Load Stops part # 753-3761 will fit the top channels of a Yakima HD bar since the slots/channels are the same dimensions.
view full answer... - Availability of Load Stops to Fit Factory Roof Rack CrossbarsDoes your Ford Explorer have a factory roof rack that has T-channels on top of the bars that are 3/4 inch wide? If so we have a solution. Most roof rack T-slots are right at 3/4 of an inch wide at the base of them. If the slots on your crossbars are right at 3/4 of an inch wide at the base you could use the part # 753-3761 to fit in them.
view full answer... - Load Stops That Fit Thule AeroBlade CrossbarsWe have load stops that fit the AeroBlades, but the part you mentioned will not as they fit the Yakima bars. Instead, you will need the following part number for load stops that fit the Thule AeroBlade crossbars: - Replacement Load Stops for Thule Aeroblade Load Bars # 753-3761
view full answer... - Load Stop Recommendation for Thule Aeroblade CrossbarWe actually have loadstops that are designed specifically for the Thule Aeroblade crossbars. For that you'd want the part # 753-3761. This would be the better route to go. Most likely the Rola would fit as we've found most of the channel dimensions are the same, but Thule will recommend you use their load stops.
view full answer... - Correct Load Stops for TracRac Ladder RackThe Replacement Load Stops # 753-3761 are compatible with the TracRac Ladder Racks that were re-branded under Thule. These ladder racks have "XT" at the end of their part number and will have "Thule" somewhere on them (typically the uprights).
view full answer... - What T-Slot Accessories Will Fit MaxxTow Ladder Rack MT70423The T-slot in the MaxxTow ladder rack MT70423 will accept accessories from any manufacturer that uses T-slots for mounting. That includes the Thule load stops # 753-3761. If you can tell me what accessories you are interested in I can make specific recommendations.
view full answer... - Will Thule Load Stops fit in Rhino Rack Aero Bar ChannelsFor Rhino Rack Aero bars the correct load stop would be the part # RRSEG which does use the top rail. That said we know the Thule load stops like the part # 753-3761 do fit the Rhino Rack aerobar channels as well.
view full answer... - Load Stops For Rola Haul-Your-Might T3 Truck Bed Ladder RackI recommend using the Load Stops # 753-3761 with the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. These stops will slide into the T-Track on top of the Rola crossbars.
view full answer... - Recommended Load Stops for the Rola Haul Your Might T3 Ladder RackFor the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 I recommend using the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac # 753-3761.
view full answer... - Ladder Rack for 2014 Toyota Tacoma With Deck Rail SystemThere are ladder racks which fit your 2014 Toyota Tacoma with the Deck Rail System, though the MaxxTow Truck Bed Ladder Rack MT70423 is not one of them. Instead, I recommend checking out the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 which does fit your Tacoma with the Deck Rail System and has an 800 lb carrying capacity. This rack does not come with load stops, but they are available with # 753-3761.
view full answer...
- Availability of T-Slot Load Stop Recommendation for Yakima Jetstream CrossbarYes, the Load Stops # 753-3761 will fit in the top channels of a Yakima Jetstream crossbar. We had a customer try them together and they worked great. A coworker of mine also test fit the Rhino Rack load stop part # RRRLH2 in a Jetstream and found that it worked well so that would be an option.
view full answer... - Replacement Load Stop Kit for Thule TH500 Ladder RackFor a set of Replacement Load Stops for your Thule TH500 Ladder Rack you can use their kit # 753-3761 which includes 4 each load stops, knobs and T-bolts. My contact at Thule said the part number you referenced is the original part number but that this kit will fit your rack. If you compare these to the stop shown in your photo you'll note they match up.
view full answer...
- Load Stops to Fit the T-Slot of Yakima JetStream Aero CrossbarsWe have a couple load stops that work in the Yakima JetStream aero bars but they aren't actually Yakima products. We had a customer test the Thule load stops, part # 753-3761, and they worked perfectly. Then we also have an employee who tested the Rhino-Rack load stops that fit their Vortex Aero bars, part # RRRLH2, and they were also a fit.
view full answer... - Cost Effective Roof Rack for a 2016 Jeep Patriot To Haul PlywoodYes, the Malone AirFlow2 Roof Rack part # MPG216 will allow you to carry plywood on the roof of your 2016 Jeep Patriot. I recommend placing the crossbars as far apart as possible in order to evenly distribute the weight. There will be no damage to the vehicles roof or factory side rails with the above setup. In order to secure the plywood I recommend using the Load Stops part # 753-3761. These will do an excellent job of holding the plywood in place but I do however recommend you still...
view full answer... - Replacement Load Stops for Original Thule Xsporter Circa 2010Yes, the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, or Thule TracRac CapRac # 753-3761 will fit on your older model Thule Xsporter. Just for future reference, the only difference between the older Xsporter and the Thule Xsporter Pro # TH500XT is how the height adjustments are made on the rack (knobs vs a pull pin system). These load stops come in a pack of 4 and will replace your original load stops perfectly.
view full answer...
Do you have a question about this Accessories and Part?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Condition: Installed
Notes: Item has been installed/test fit and is missing one of the washers.
Info for this part was:
Updated by:
Tyler C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Matthew S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
12/5/2022
When it comes to which racks this part is compatible with, it has to specifically be the Thule TracRac CapRac, part # TH29200XT, as well as the others listed above in the description. Is that the same part you got these for?