CargoBuckle Ratchet Tie-Down Straps w/ S-Hooks - 1" x 15' - 500 lbs - Qty 4

See what our Experts say about this CargoBuckle Ratchet Straps

• Trunk Mounted Wheelchair Rack for a 2012 Ford Mustang GT Convertible
  A manual chair like yours technically could fit onto a trunk bike rack like the Saris Guardian, part # SAR93FR, but I don't recommend that this is a direct solution. The wheel will hang slightly lower than it really should safely and potentially scrape on the ground and could damage the vehicle or the wheelchair itself. I do however recommend adding a traditional cargo carrier to the vehicle. This will provide both a stable, safe location for the wheelchair as well as expandability for...
  view full answer...
• Parts Needed to Secure Kayaks and Ladders to Thule Xsporter Ladder Rack
  The Thule Xsporter Pro part # TH500XT that you referenced comes with load stops on the crossbars already so that would be the base for how you would want to carry the ladders. If you needed replacement load stops or wanted an additional set you'd want the part # 753-3761. For straps then to hold the ladders to the rack the part # IMF12636 would be a great option as well. For a kayak carrier the Hull-A-Port part # TH834 and the adapter # THXADAPT3 would be a great way to carry each of your...
  view full answer...
• Roof Rack Recommendation to Carry Ladders on 2015 Mazda CX-5 with Naked Roof
  Thule has a roof rack that will fit and work great for your 2015 Mazda CX-5 that has a naked roof and moonroof with the roof rack part numbers # TH711420, # TH710501, and # TH145110. This gives you an aerodynamically shaped roof rack (minimal wind noise) with plenty of capacity that's very well made and easy to install. Then for a set of load stops that fit these bars to make carrying a ladder easy you'd want the part # 753-3761. For straps then to hold the ladders to the rack the part...
  view full answer...
• What Hitch Weight Capacity do I Need for Hauling My 230 Pound Motorcycle on My 2020 Kia Sportage?
  As far as the tongue weight capacity on hitches, every hitch has a specific rating. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13281, for example, has a maximum tongue weight of 525 pounds while the etrailer Hitch Receiver # e72TR has a maximum tongue weight of 675 pounds. In addition, we need to consider the weight capacity of the motorcycle carrier itself. If you were looking at the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp # UF48-979033, that has a...
  view full answer...
• Trailer Hitch and Cargo Carrier for a 2013 Ford Fusion to Carry a Power Wheelchair
  What year is your Ford Fusion and does it already have a trailer hitch? With this information I can make some recommendations for you.
  view full answer...
• Recommended Retractable Ratchet Tie-Down Straps For Multiple Mount Applications
  I have a couple options for you, however we don't have the specific 2 inch by 12 foot retractable strap you referenced. One option is the the CargoBuckle Ratchet Tie-Down Straps w/ S-Hooks - 1" x 15' - 500 lbs - Qty 4 # IMF12636. This is a nice strap with vinyl coated S-hooks on either end. We don't currently carry any straps over 10 foot with the retractable design. The longest option is the Erickson Retractable Ratchet Strap # EM34416. This is a 10 foot length with the 2 inch wide...
  view full answer...
• Recommendation to Secure 18 Gallon Tub in the 20x60 Curt Cargo Carrier # C18150
  The best way to secure your tubs on the 20x60 Curt Cargo Carrier # C18150 would be to use some Ratchet Tie-Down Straps like the CargoBuckle # IMF12636. Ratchet tie-downs are a little more secure than Bungee Cords but many use Bungee Cords. If you go with Bungee Cords, I suggest an assortment. I would recommend beginning with 4-6 each of # EM06664 19" and # EM06656 24", along with 2-3 each of the lengths such as # EM06658 36" and/or # EM06668 42". Bungees would be able to keep the tubs...
  view full answer...
• Can X-Track be Used with Tie Down Anchors
  You could use the anchor rope ring # 3481767 with the X-track part # 3481770 with the tie downs like the part # IMF12636 that you mentioned.
  view full answer...
• Is There B&W Biker Bar Tie-Down System Work for 2017 FLRT Harley Davidson FreeWheeler Trike
  For your Harley Ultra Limited the Biker Bar part # BWMC2301 that you referenced is the correct kit but for a trike we don't have a fit mainly because you wouldn't need one. The trike will balance itself so a set of ratcheting tie downs like the set part # IMF12636 would work well. Each tie down has a 500 lb working load limit capacity.
  view full answer...
• Recommended Cargo Anchors and Tie-Down Straps for Lets Go Aero LittleGiant Trailer
  For your LittleGiant Trailer, I recommend the D-Ring Tie-Down Anchors for C-Channels on Let's Go Aero Trailers - Bolt On - 800 lbs - Qty 4 # MMP543 and ratchet straps like the Erickson Re-Tractable Ratchet Straps w/ Push-Button Releases - 1" x 10' - 400 lbs - Qty 4 # EM04418 or CargoBuckle Ratchet Tie-Down Straps w/ S-Hooks - 1" x 15' - 500 lbs - Qty 4 # IMF12636.
  view full answer...
• Do You Have a Recommended Kayak Rack for a 2001 Ford Excursion?
  I called my contacts at both Yakima and Thule, and they both advised against buying the Yakima Big Stack # Y04041 and the Thule Stacker # TH830 because of the 1/4 inch clearance under your factory crossbars on your 2001 Ford Excursion. The best way to go to guarantee a fit of the kayak carrier clamps to your vehicle is to purchase the Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long - Qty 2 # TH711400. With the crossbars, you will need: - Rapid Podium Feet for Thule Crossbars...
  view full answer...
• Recommended Enclosed Trailer Size And Harley Street Glide Special Biker Bar
  From my research more than likely the smallest available enclosed trailer you can get both to fit in is a 8.5 x 24 foot. The next smallest is 8.5 x 16 but the two Harleys will probably be a tad too long to fit into that size enclosed trailer. Your best option is to measure your bikes sitting next to one another (with the handle bars positioned to not rub one another) and measure the length to make sure you get an enclosed trailer that is wide enough. Those were just the two sizes I could...
  view full answer...
• Can the Tow-Rax Removable Wheel Chock be Installed on 5/8" Thick Plywood Floor
  I reached out to my contact at Tow-Rax who said that the Removable Wheel Chock # TWSPWC will work great for your application. Please note though that the wheel chock isn't load bearing so you will need to secure your motocross bikes with ratchet straps like part # IMF12636.
  view full answer...
• Ratchet Strap To Hook Around Yakima Round Crossbar
  I do have an option for you but the CargoBuckle Ratchet Tie-Down Straps part # IMF12636 only have a 7/8" wide opening. However, the Ratchet Tie Down Straps part # ETBMB-05852 have a 1-1/4" wide opening so it should work just fine on a Yakima Round Crossbar.
  view full answer...

Do you have a question about this Ratchet Strap?