Lippert Manual Pull-Out Step for RVs - Single - 6" Drop - 24-1/4" Wide - Steel - 300 lbs
(600 reviews)
Price: $93.30
Lippert Manual Pull-Out Step for RVs - Single - 6" Drop - 24-1/4" Wide - Steel - 300 lbs
Item # LC432678
Our Price: $93.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (600)
- Q & A (0)
- Photos
Lippert RV Steps - LC432678
- Towable Camper
- Pull-Out Step
- 1 Step
- No Ground Contact
- 7 Inch Drop/Rise
- 24 Inch Wide Step
- 25-3/4 Inch Wide
- Steel
- Lippert
This 8-1/4" deep, single pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV step makes it easy to get into and out of your motor home
- Simply pull step out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation - hardware sold separately
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 14-1/4" - 17-1/4"
- Step dimensions: 24-1/4" wide x 8-1/4" deep
- Mounting bracket dimensions: 25-3/4" wide x 6-3/4" tall x 5-3/4" deep
- Drop/Rise: 6"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 25-3/4" wide and 5-3/4" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432678 Lippert Components (LCI) Single Radius Entry Step
Similar to Hickory Springs 951243EXTALC1 and 951247RFXWAC1
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Single - 6" Drop - 24-1/4" Wide - Steel - 300 lbs - LC432678
Average Customer Rating: 4.8 out of 5 stars (600 Customer Reviews)
This 8-1/4" deep, single pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Richard 05/03/2024
I think the product is great! I am using it for getting in and out of my car trailer and it has made things a lot easier. I did have trouble with the shipping. The day it arrived it was raining. The package was put in my mailbox but stuck out 6" or more and the whole end of the box was soaked. I don't think sending it thru the us mail was the best option. Maybe UPS or FedEX would have been a better option.
by: RickyB06/17/2022
Have not completed install yet so can’t give a rating on how they function but can give rating on the install about to happen. Because of the holes that should line up with the recommended outrigger brackets also purchased from etrailer it is going to take longer to install. I will need to drill the opening on the step side brackets larger so it will line up with holes on the outrigger. See the pictures attached. I had bought the same strep but with 2 steps and the mounting holes matched up with the outrigger. It’s the one step one that is having the issue.
by: Andrew12/22/2023
Ashley is awesome.
So responsive and knowledgeable. Pull out steps are a game changer.
by: Steve12/21/2019
This single step was perfect for my application. I had a 12" to 16" gap between the ground and floor of my cargo trailer depending on how high you cranked it up. I considered a step with multiple steps but decided that this single step was going to work out much better. There were instructions in the box, but since my trailer was not equipped with a mount for the step, I had to completely fabricate a platform to attach the step. It took a few hours, but was not that difficult. Thanks again to Greg making sure I got the item as soon as possible.
by: Matty B05/11/2024
This appears to be of good quality
by: RMG07/02/2023
The step is a good product, but it was not going to work for my project. I bought this knowing I would have to modify it. I'm still trying to think how I can change it to fit as an additional step on my fifth wheel trailer. The price was low enough that I can use it for the parts that I need.
by: Rob 10/03/2023
Great step. East to install and works great! Just wish they made them larger since my door is 36". Super fast shipping as all ways.
by: Karl 03/21/2024
good product and easy to install
by: Thomas 03/14/2023
Excellent product. I added this step to my existing power steps on a 2008 Fleetwood Bounder. At times the leveling system leaves the first step rather high off of the ground & this helps greatly. I made a steel plate to interface between this step and the bottom (OEM) step. The only problem is that on some occasions this added step is too low to allow the power steps to fully deploy ... but we deal with that on those rare occasions.
by: Jeffrey A04/21/2021
etrailer has been great with many products and great service on my 72 Lee Liner restoration. Thanks
by: Ron07/28/2019
Perfect for my application. An extra step to help my wife get into our 4x4 truck.
by: Charles 05/17/2023
Great service and attention from etrailer representatives! We'll keep on doing business with them.
by: David 10/03/2023
The step was the right part and it was delivered in only a couple days after I placed the order. It is nice to get such nice service.
by: David 07/20/2020
Installed this under the side door of a Homesteader Challenger 7’ x 12’ enclosed utility trailer. I used a 3/16” x 3” x 36” plate attached to the frame to support the front of the step mount. Rear part of the step mount was bolted to the frame. Went on easily and is solid. Very happy with the purchase and the quality.
David
7/21/2021
1 year later still works great and is rock solid
by: Rick Pitts11/13/2021
I bought this to replace the double step previously purchased, LC432682, and this single step is 3/4 inch wider and would not fit between the outriggers. Both are 24-1/4 inch steps but the single step is overall wider. I did not think to look at all measurements of single step since they were both 24-1/4 wide. I will send the single step back and hope to get a refund. For now I am using the double step previously bought from etrailer.
Jenny N.
12/2/2021
I will have our customer service team reach out to you. The dimensions of this step are 4 and a quarter inches wide x 8 and a quarter inches deep with the mounting dimensions of 25 and three quarters inches wise x 6 and three quarters inches tall x 5 and three quarters inches deep. I see that you had previously ordered step part # LC432682 where the mounting bracket dimensions are 25 and one half inches wide x 9 and three quarters inches tall x 12 inches deep. We list all of our steps by how wide the step is versus the mounting bracket dimensions. These specs will be listed on the product page for each step.
Helpful Links
by: Santos02/05/2021
Some settings to install it but it's easy. looks great and the material is strong
by: Allen10/19/2022
Never used as they were not a good fit for my trailer. Passed on to another buyer. They appeared to be well-built but arrived scratched and dented.
by: Jimmie 07/26/2023
VERY WELL MADE EASY TO INSTALL ON FLAT SURFACE EVERYTHING AS ADVERTISED
by: Larry04/28/2022
I wanted to add a step to my cargo trailer. Door was a little high and a stretch carrying something heavy. This was the answer; secure step and easy to extend/retract.
by: Raymond04/23/2021
Works fine. Holes did not line up so not the easy replacement I had hoped. Not too difficult to redrill though.
Raymond
4/24/2022
Works fine.
by: BOB11/21/2021
Product exactly as described and better quality frankly than my Camper steps I will extend. Shipping very timely and free.
I am adding a feature to the mounting hole that will allow me to slide it onto the bottom step. My truck is 4x4 and high off the ground so the bottom step requires a step stool when camper is left on the truck.
Not now however, thanks semper fi
by: James07/05/2019
Exactly what I needed to get into my work trailer! I am a remodeling contractor and have a 16ft. enclosed trailer filled with tools, etc. I am 66 years old and it was very difficult to get INTO the trailer. There never was a step on this trailer - so I thought something like this would work. It did!!! Just that extra 6in helps me a LOT get into the trailer without stress on my knees (have had both knees replaced). Easy to install and does the job. I weigh 260# and no problem handling my weight.
by: Susan 09/12/2022
The step worked great on my 2500 promaster van.
by: Patrick03/04/2022
I was not aware that the step didn’t come with any kind of hardware. Had to purchase separately. Other than that, it worked for what I needed it for.
Heather A.
3/11/2022
The hardware that you will need to attach the steps to the outriggers is part # LC118155-72.
by: Joe R Ramirez03/08/2023
it's a sturdy and well build step. unfortunately I can't use it, I was going to use it on my truck but my truck sits lower to the ground that That I tough. Can you advice me on how to return it.
25
599
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Upgrading Lippert One-Step for Two-Step Manual Pull Out Steps For TrailerThe Lippert # LC432682 manual pull out two-step stairs is the closest match. Replacement steps only come in a few sizes. This step is 25-1/2" wide at the widest point. The next sizes are about 18" or 30". Using some washers seems like a good solution. You will likely have to drill new mounting holes to match your 3" on center holes. After that you will have a sturdy step rated for up to 300 pounds. The perfect compliment to these steps is the Camco # CAM42177 grab handle. I have these...
view full answer... - Replacement Motor for Kwikee 28 Series Step Made In 1988The issue you are having with your Kwikee 28 Series Step is a bad motor. I do have an option for you but the cutoff date for replacement parts on Kwikee Steps is 1999. Therefore, they do not make a replacement motor that will work with your Kwikee Step due to its age. The only option you have is a full replacement, the Kwikee 28 Series Electric Step part # LC3747451. If you want to switch to a more cost effective manual pull-out step you can use the Lippert Manual Pull-Out Step part #...
view full answer... - How To Install Steps on a 2016 Coachmen Leprechaun 317SAI spoke with Lippert about the Lippert Components Kwikee Step Frame 28 Series Step part # LC3747457 and unfortunately, they do not provide any mounting information as this is done through the trailer manufacturer. They did however state that you should not have too many issues so long as the surface in which the steps attach to is sturdy. Please note that the above part is for the frame only, if you need the motor/control board etc. then you would want to use the Lippert Kwikee 38 Series...
view full answer...
- Lippert Manual Pull-Out Step for RV Used on Horton Ambulance BodyIt will most likely require some fabrication or drilling of new mounting holes to your Horton Ambulance body, but yes, the Lippert Manual Pull-Out Step for RVs, # LC432678 can be used. I think you will find the Lippert Outriggers for Manual RV Steps, # LC301704 to be useful for this modification of your build out.
view full answer... - Replacement Latch for RV Screen Door Cougar 29RKSWe have the Bi-Directional Screen Door Latch # 37206-11865 that fits most standard RV screen doors and can fit whether the door is a right handed or left handed setup so it would work great for you. It has mounting holes that are 3 inches apart.
view full answer... - Determining The Correct Replacement Pull-Out RV Steps For A 2018 Lance 1995 Travel TrailerTo find the correct fit for your 2018 Lance 1995 travel trailer you'll need to first measure the height from the ground up to the mounting brackets (entry height) and the overall width of the mounting brackets. Once we have these measurements we can then look at the available options and see if there's any with deeper steps. The Flexco Manual Pull-Out Steps for RVs # SMFP-2100 has two steps that are 24" wide x 9" deep. They have a mounting bracket width of 26" wide and entry height range...
view full answer... - Can Manual Pull-Out Step be Installed on a Horse TrailerTechnically you can add any Manual Pull-Out Step like # LC432678 to your trailer. You may need to also add outriggers # LC301704 to the frame in order to get the step in the right position and if you can't attach it reasonably to the desired location.
view full answer... - Is There a Folding Double Step That is 24-1/4 Wide x 8-1/4 DeepThere is a folding double step that has the same 24-1/4 inch wide x 8-1/4 inch dimensions as the Lippert Manual Pull-Out Step for RVs - Single # LC432678; the step you are looking for is the following: - Lippert Manual Pull-Out Step for RVs - Double # LC432682 I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - Recommendation For Stable Single Step For RVWe do not have the Lippert SolidStep, Item # LC791572, in a single step option. However, I recommend the Lippert Manual Pull-Out Step # LC432678. This step is a lightweight but durable single step that mounts to your RV frame with bolts similar to your factory step. The Hickory Springs step dimensions are 24 inches wide and 8-1/4 inches deep. I have attached a video review on this step and a link to our RV single step selections for you to checkout. If you need additional stability...
view full answer... - Installing the Lippert Manual Pull-Out Step on Cargo Trailer. To install the Lippert Manual Pull-Out Step for RVs, # LC432678 on a trailer that does already have a mounting point, this will need to be custom fitted. I would suggest you use a metal backing plate and bolt through the floor and plate to the steps mounting hole location.
view full answer... - Distance from Mounting Bracket to Bottom of Hickory Springs Manual Pull-Out StepWhen the Lippert Manual Pull-Out Step # LC432678 is in the closed position, or with the step pushed in it measures 6-3/4 inches from where it mounts to the very bottom of it, and then when open it measures 8-1/4 inches.
view full answer...
- Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - Replacement Steps for 2013 Provan Bengal Truck Bed CamperThe Lippert # LC432678 you were looking at do have a bracket height of 6-3/4" tall, so they're going to be a little shorter than your existing steps were, but there is still going to be something hanging down there. It actually sounds like the TorkLift GlowStep # TLA7802-8000 would be a great option. These steps have pull pins that can be removed to take the steps off during travel, so they're not going to hang below the truck when you're traveling. This is a 2 step setup that has strong...
view full answer... - Will Outriggers SM-01 Allow Hickory Springs Pull Out Steps to Fit RV with Larger Mounting BracketsThe Outriggers part # LC301704 are compatible with the all manual pullout steps like # LC432678 that you referenced. You may need to remove your old brackets to install the Outriggers in place of them and you'll be set.
view full answer... - Could Manual Pull-Out Step # LC432678 Fit 2021 Thor Compass 23TWYes, the Lippert Manual Pull-Out Step for RVs # LC432678 is universal in design that it would easily fit a 2021 Thor Compass 23TW.
view full answer... - Can Single/Double RV Step Replacement Fit 1975 Prowler RVMost of the steps we offer can fit your 1975 Prowler but how much fabrication will be required comes down to what your step area has now. Due to the age of your Prowler I'd suspect you'd need to weld in new brackets to install steps like the single step part # LC432678 or the double step # LC432682. For new brackets you'd need the part # LC301704.
view full answer... - Replacement Manual Step for a 2018 Lance 1475Lippert Manual Pull-Out Step # LC432678 is a great option for a single step. The step has integrated water channels and drain holes to give you the best traction. The steel construction gives you a firm and strong step underfoot and the black powder coat gives you a clean finish and durable rust resistance.
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/5/2022
I reached out to the manufacturer and they would like to ask you a few additional questions. They will reach out to you.