Installing the Lippert Manual Pull-Out Step on Cargo Trailer.
Question:
How can this be mounted to a 7x 14 cargo trailer side door?
asked by: Tom W
0
Expert Reply:
To install the Lippert Manual Pull-Out Step for RVs, # LC432678 on a trailer that does already have a mounting point, this will need to be custom fitted. I would suggest you use a metal backing plate and bolt through the floor and plate to the steps mounting hole location.
expert reply by:
Michael R
0
Product Page this Question was Asked From
Lippert Manual Pull-Out Step for RVs - Single - 6" Drop - 24-1/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 25-3/4 Inch Wide
- 1 Step
- 7 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Continue Researching
- Video: Review of Lippert Components - Enclosed Trailer Parts - LC118155
- Q&A: 7-Way Furrion Power Adapter Fix For 2021-2022 Chevrolet/GM Trucks
- Q&A: Ceiling Garnish For a Dometic Fantastic Roof Vent Fan Model 1450
- Article: Calculating Portable Generator Power Needs
- Article: RV and Camper Types, RV Classes
- Article: Rooftop Cargo Carriers
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Article: How to Measure a Trailer Axle
- Article: Flat Towing Package for 2002-2004 Jeep Liberty
- Article: Performance Chips and Modules
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Are There Rust-Proof Trailer Fenders For 15 Inch Wheels For Tandem Axle Trailers
- Q&A: Is a Gap Between a Trailer Brake Backing Plate and Drum Normal
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler