Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
(220 reviews)
Price: $79.41
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
Item # UF35-946402
Retail:$123.99
Our Price: $79.41
You Save: 36%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (220)
- Q & A (0)
- Videos (2)
- Photos
Ultra-Fab Products RV and Camper Hitch - UF35-946402
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 2 Inch Hitch
- Bolt-On
- Ultra-Fab Products
This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.
Features:
- Trailer hitch receiver clamps onto your RV's rear bumper
- Provides receiver opening for hitch-mounted accessories - such as bike racks and cargo carriers - or light-duty towing
- Heavy-duty steel construction
- Black powder coat provides excellent corrosion resistance
- Hardware and U-bolts included for installation
Specs:
- Application: 4" x 4" RV bumpers
- Receiver opening: 2" x 2"
- Maximum gross trailer weight: 3,500 lbs
- Do not exceed weight rating of your bumper
- Maximum tongue weight: 100 lbs
- 1-Year warranty
Note: For use with RV-approved accessories only.
35-946402 UltraFab Universal Hitch Adapter
Tech Tip
No drilling required for installation
Video of Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Ultra-Fab Products RV and Camper Hitch - RV Bumper Mount Hitch - UF35-946402
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Ultra-Fab two inch Motor Home Trailer Hitch Receiver for four inch by four inch steel bumpers, has a 3,500 pound gross towing weight capacity. Now, this powder coated steel hitch receiver is designed to clamp around your RV's four inch square bumper, and it provides this two inch receiver opening for your hitch mounted accessories such as bike racks, cargo carriers, or you can even use it for light towing. Now, this hitch receiver can only be mounted onto a four inch square continuous steel welded bumper, it's not designed for aluminum bumpers. This is a heavy-duty steel construction, does have a maximum gross trailer weight capacity of 3,500 pounds. Now, one note on that is you do not wanna exceed the weight rating of the bumper it attaches to, and it has a maximum tongue weight of 100 pounds.
If you noticed, if I show you the bottom of it, you can see it does have the safety loops on each side for connecting your safety chains to. We mentioned the black powder coat finish on it, provides rust and corrosion resistance, and this is a nice bolt-on installation, it includes all the mounting hardware, you can see I've pretty much installed it onto the part just to show you where it all goes, and it comes with a nice set of instructions that'll describe how it all goes together. Now, also I wanted to show you, if you look closely, right here and right at the very bottom, there's two large bolts here, these thread into the hitch receiver, and the reason those are on there is once you put your accessory in there, you tighten those down on the bottom and on the side, and it'll help reduce movement between the hitch mount and the receiver tube. Again, the application, you can see the U-bolts here, they are designed to fit four inch by four inch continuous steel welded RV bumpers. Receiver opening right up here is two inches by two inches, and one note is this is designed for use with RV approved accessories only.
Let me show you all the sides. But that should do it for the review on the Ultra-Fab two inch Motor Home Trailer Hitch Receiver for four inch by four inch steel bumpers.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs - UF35-946402
Average Customer Rating: 4.7 out of 5 stars (220 Customer Reviews)
This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.by: Mark N09/11/2018
Installed this hitch on my fifth wheel to pull my side by side to the upper peninsula in Michigan, however I would recommend that you be sure your bumper is capable of the weight being towed. I personally removed my existing bumper and welded on a much heavier steel bumper. This hitch did exactly what was expected of it, thanks so much to Kirstin for her help at checkout
by: William12/06/2017
Works great used on trailer bumber for portable refrigerator to carry on cargo unit. Had to beef up bumper with angle iron due to weight ...no bounce at all with hitch
by: Steve Cosgriff02/26/2020
This bracket provided me the means to mount the receiver style spare tire b racket on my Class C RV. By mounting it upside down, it placed the weight squarely on the frame, leaving the u-bolts to merely hold it in place.
by: James DaVanzo08/26/2013
The product arrived ahead of schedule. etrailer upgraded my shipping at no extra cost! It fit on my bumper with very little problem. It was tight because of my chrome covering, but I expected that. I did have to replace two of the nuts that would screw on, and I had wanted to place it above the bumper but the body of the trailer wouldn't let me. I haven't gotten a bike carrier yet, but I wholly expect it to work just fine. I would have given it an excellent but for the bolts I had to replace.
by: Scott S.10/07/2020
I needed a way to carry our mountain bikes when we go traveling with a our RV. The Ultra-Fab Hitch receiver fit perfectly on the 4x4 rear bumper allowing me to carry our bike rack. I feel I could even tow my golf cart trailer behind my RV with this hitch if needed. Very easy to install with a simple socket set and torque wrench.
by: Old Woman Camping06/19/2022
Product fit perfect. Easy to install. Very happy with the hitch, Only one problem, the anti-wobble bolt on the side would not fit because U-bolt is in the way. You can only get the bottom anti-wobble bolt in. (See 2 pictures) I solved that problem by cutting off the end of the U-bolt that was in the way. They just need to move that hole back a bit more. Now I have both bolts on and cargo carrier is solid.
by: Roger04/29/2021
This bolt on hitch worked as advertised. Important to get the bolts sufficiently tight. I used this product to hold a cargo carrier on 2020 Colorado camping trip.
by: Bryan05/29/2019
Very easy to install (my four year old helped me). We used it for our bike rack on the back of the trailer so it was installed on top of the bumper instead of underneath. This thing holds it very solid.
by: Alan08/01/2023
hooked up hitch both u bolts broke dropping both bicycles on freeway in Montana. Just a fact and no total rack and bikes were well un der the maximum load rateing,
by: Zachary08/20/2020
Cold the cargo rack on the rear of our travel trailer.I bought it so that I can lock my generator to it when we’re traveling.
by: Kenneth06/04/2021
This fit very well, only problem is the side anti wobble bolt won’t fit when the U bolts are installed. Note submitted picture.
Kenneth
6/5/2022
Just ground off a 12 inch or so, installed bolt before the U bolt. Works fine now.
by: Bret07/31/2018
Product looks and feels very solid and well made. Only took me 5 mins to install. Can't wait to see how it performs as we head out in the next few days. I will be carrying my generators and gas and kids bikes on it. Thank you again etrailer.com for an easy purchase with all of the info i could ask for on your website to help make the best selection for my needs.
by: Norman 09/07/2023
Works as advertised. Simple to attach. I use it on the back of my camper an put a generator, extra fuel and loaded cooler. Thanks for great product.
by: Jesus07/29/2022
The bolts on the top are not long enough. I had to buy longer bolts. The bolt on the side that secures the hitch to reduce the movement is too long. The u-bolt is in the way. I had to buy a shorter bolt. The bolt hole needs to be repositioned so the u-bolt will not interfere.
by: Randy 02/01/2024
the item looked and worked as advertised
by: Paul P.04/22/2015
Well constructed, very easy to install, negates fabricating or adapting a hitch by taking advantage of existing 4" bumper.
by: David 06/08/2023
E trailer is a consistent place I shop for fast delivery, great communication and products as described.
by: Starr08/22/2022
Will not slide properly over my 2” hitch, machined wrong, the holes for the hitched pin indent in on the hitch, will not work. This is my second try, I wish they would inspect there products before sending them out as I am stuck with no way to move.. will be asking for a full refund.very disappointed!!
David B.
9/20/2022
This is for mounting on motorhome bumpers not to mount on hitch receiver bars.
by: enduser10/08/2019
Bought (2) of them to make to make a removable rack for a small inflatable boat to carry on the back of the trailer bumper. Appears plenty strong have to see how it lasts. Did notice that the chain loops interfere with the 5/8" bent hitch pin hair pin connection. I'll have to make one out of a bolt (they should have though of that).
Victoria B.
10/24/2019
Rather than a bolt, I recommend using a straight hitch pin, such as the etrailer Trailer Hitch Lock # e98882. This hitch pin has a locking end cap to keep your hitch accessory secure. The lock core is accessed on the end of the cap, making it easier to access in a hitch with limited space like this one.
Helpful Links
by: Rich A.07/03/2013
So far it was very easy to put on the Trailer, I used it for a cargo carrier to place a 3000 Honda Generator on the carrier, work great, the next thing I'm going to try is to pull my 2 Waverunners, but I will check the weight first..
Rich A.
7/3/2014
It has worked great, but now I have changed my Trailer and do not need it anymore
by: Dave P03/24/2020
I mounted 2 on my camper bumper. One for a bike rack and the other for a swing away grill. Super happy w the product and the results.
Dave P.
3/24/2021
A year later, I couldn’t imagine not having the bikes and the grill on the back of the RV. Great product
by: Ron C.04/14/2017
The Ultra fab 2" RV Hitch Receiver for 4"x4" Bumpers is a very well made piece of steel. It fits our Wildwood Trailer Bumper perfectly. It is built so sturdy we have no worries about using it to haul our bicycles. It is rated at 3.5k!
Rachael H.
5/23/2017
Thanks for the review Ron, but please also keep in mind that an RV approved bike rack should be used, and please make sure the bumper is appropriately for your use.
by: Robert G.12/01/2017
Very sturdy attachment. Fit perfectly on the trailer bumper and hardware was 1/2" Grade 8 Cad plated--good stuff. Order was received at my driveway exactly on schedule. I would continue to do business with etrailer.
Robert G.
12/1/2018
The attachment is working great. I need to store it outside and see no physical deterioration.
by: Steven C04/09/2020
I didn't use these as recommended, but they are working great. Most people mount one of these on the back bumper of their RV and then attach some way to carry a storage box or a bike rack. I didn't like the way they flop around going down the road. All that movement isn't good. Instead I purchased 2 of them and mounted them inline with the frame rails, then welded together a rack to affix a standard pickup tool box and mounted it in the hitches. This supports it from both sides and is stronger since it is mounted inline with the frame rails. They are working great and prevent any movement in the box. It's a rock solid mount.
25
220
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- Recommended Bike Rack for Trailer with Tilting Bumper Mounted Spare TireFor your camping trailer that has a tilting bumper mounted spare tire, I recommend looking at an RV approved hitch-mounted bike rack like the Swagman Dispatch 2 Bike Platform Rack # S44FR. This will slide into a 2 inch trailer hitch receiver and hold 2 bikes of up to 45 pounds each. When the bikes are unloaded from the carrier, the upright mast can be folded down to allow you to tilt back the spare tire on your trailer for rear storage access. This carrier also includes a hitch and cable...
view full answer... - Bumper Mounted Hitch Recommendation for RV to Carry a 75 lb Spare TireThe Swagman Specialty Trailer Hitch # S64025 that you referenced has a 200 lb capacity so it would be strong enough to handle the weight of your spare tire, but it is designed only for use with bike racks so although it would seem to work for you, I cannot recommend it for you. For a similar hitch that would work for what you are trying to do you would want the part # UF35-946402 . For a spare tire carrier you would then want the # C31006 as it would also have a high enough capacity for...
view full answer... - Trailer Hitch to Carry a Bike Rack on Back of TrailerNo; the only way to carry your bike rack is to mount it to your trailer's frame. The Curt Adjustable Width Trailer Hitch Receiver # 13703 will fit box frames, C-channel frames, or I-beam frames that are between 22" and 72" wide, so if your boat trailer has that this hitch can work for you. Also please keep in mind that your bike rack does need to be rated for use behind a trailer. For this I recommend checking out the Swagman Trailhead # S63381 has a 35 lb per bike weight capacity and...
view full answer... - Dimensions of Mounting U-Bolts for Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver UF35-946402On the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver # UF35-946402 the included u-bolts have a material diameter of 7/16-inch. This means that the gap in your photo needs to be at least that large for the u-bolts to fit through. The u-bolt posts' center-to-center spacing is 4-5/8-inches. On the hitch assembly the four holes are 1/2-inch diameter. Left-to-right they are spaced 4-3/8-inches apart on hole centers, and 4-5/8-inches apart front-to-back. These dimensions are noted on the...
view full answer...
- Bumper Mount Hitch Recommendation for RV with 4 inch Square BumperWithout knowing exactly what issues you are having with installing the # E-100 the best recommendation would be to have you check out the part # UF35-946402 as it is a U-bolt style hitch designed to fit a 4 x 4 square bumper like what you have. I attached an install video for this hitch for you to check out as well.
view full answer... - Ultra-Fab RV Bumper Hitch Recommendation For Motor HomeWhile we do have a hitch that will work for your needs, the Ultra-Fab Bumper Mount Hitch # UF35-946402 you referenced is designed specifically for a 4 inch by 4 inch bumper and would not fit. The Stromberg Carlson # BA-100 is a perfect fit as it is intended for RV bumpers between 4" x 4" and 4" x 4-1/2 inch with a weight capacity of 200 lbs. It features a 2-inch receiver opening with a plate measuring 6 inches by 6 inches. Just a reminder, this is intended for RV-approved accessories...
view full answer... - Folding Cargo Carrier and Hitch Recommendation for RV 4 inch BumperWith an RV 4 inch bumper hitch installed like the Ultra Fab Hitch part # UF35-946402 you could install and use a folding hitch cargo carrier from Curt like the # C18151 and you'd be set.
view full answer... - Recommended RV Trailer Hitch Receiver for a Bike RackOur most popular trailer hitch receiver for RV's is the Curt # 13703. It will fit trailers with a frame that measures between 22 to 72 inches wide. It can be bolted or welded onto the trailer. Another style is the Ultra-Fab bumper mount receiver. We have one for bumpers that are 4 by 4 inches # UF35-946402 or for 4-1/2 by 4 inch bumpers, like # 337RVA24. You'll need to verify that your trailer's bumper can support the weight before using this style. If you don't already have a bike...
view full answer... - Recommended Bike Rack Options for a 2022 RPOD 190Congratulations on the new 2022 RPOD 190. We have several options for you, such as the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers, # UF35-946402. This clamps around your RV's 4" square bumper to provide a receiver opening for hitch-mounted accessories - such as your bike rack. Although this must be a bike approved for use on a travel trailer. My recommendation is to consider the Jack-It 2 Bike Rack for A-Frame Trailers, # LC429756. This bike rack mounts on the...
view full answer... - Trailer Hitch Fits for 2016 Forest River Crusader 28RL 5th Wheel TrailerAll of the hitches we offer for use on the rear of a motor home, 5th wheel or other RV are the 2-inch size. A Class II hitch has a 1-1/4-inch receiver opening. No hitches of this size are offered for use on trailers due to the high mechanical stresses that can be found at the rear of an RV. I checked the specs for your 2016 Forest River 28RL but I could not confirm the frame dimensions or rear bumper construction. If you have a continuously-welded 4-inch steel bumper you can use Ultra-Fab...
view full answer... - Recommended Bumper Hitch for Travel Trailer With 1/4The Curt # E-100 might be able to work for you; I went to the warehouse to measure the width of the back piece and it is 1/4". If you were able to somehow attach the bolts with the hex flange nuts in front like in the photo I've attached, then there should be enough space. You were correct about the Ultra-Fab # UF35-946402, as the clamps measure nearly half an inch, so there would not be enough space between your bumper and trailer. Also, be sure to check your trailer specs for the bumper...
view full answer...
- Could Ultra Fab Hitch Part # UF35-946402 Fit Bumper Measuring 3 inch by 3 inchSince your bumper is 3 inch by 3 inch the Ultra Fab hitch part # UF35-946402 that you referenced can fit it but you would need to use a 1 inch spacer on the top/bottom and another one on either side so that it fits properly since this is designed for a 4 inch by 4 inch bumper. The spacer would essentially make the bumper 4 inch by 4 inch.
view full answer... - Options to Maneuver a Travel Trailer for Set-Up/Parking Without BackingWe do have a selection of bumper mounted bolt-on hitch receivers such as the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that fits a 4"x4" bumper and then provides for a 2" receiver; although this is not designed for the type of use you are describing. My suggestion is to consider the Trailer Valet XL Trailer Dolly with Chain Drive with 2" Hitch Ball, # TVXL2 or if needed, 2-5/16" ball in # TVXL25. This heavy-duty dolly with integrated drive will help you maneuver your trailer into...
view full answer... - How to Mount a Bike Rack on a Cherokee Arctic Wolf 5th WheelThe Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946402 will fit RV's with a 4" wide x 4" tall steel bumper and bike racks with a 2" receiver tube. However, in order to use a bike rack on the rear of an RV the bike rack must be RV approved. I do have an RV approved bike rack option for you but the Thule T2 Classic 2 Bike Platform Rack part # TH69TX is not. For a similar wheel mount 2 bike carrier that fits 2" hitches and is rated for use on the back of an RV, I recommend...
view full answer... - Can Ultra-Fab Motor Home Trailer Hitch Be Mounted On Top Or Bottom Of BumperThe Ultra-Fab 2 inch Motor Home Trailer Hitch Receiver, part # UF35-946402, can be mounted either on the top or on the bottom of the bumper depending depending on the clearance you need. You will want to make sure you do not exceed the weight rating of your RV bumper. The maximum towing capacity of this hitch is 3500 lbs and the maximum tongue weight is 350 lbs. I have attached a photo that shows the UF35-946402 installed both ways, with one being mounted on the top and one mounted on...
view full answer...
- Availability of Bike Rack to Fit on Rear of 2010 Keystone Sprinter and Clear the Spare TireThe Ultra-Fab Motor Home Trailer Hitch Receiver, part # UF35-946402, will fit on a 4-inch RV bumper. It has a weight capacity of 200 lbs, but you will also want to verify the weight capacity of your bumper. If the capacity of the bumper is lower than 200 lbs, you will need to use that capacity as your guideline. The Swagman 3 Bike Rack, part # S64152-2, is designed for use on the rear of a RV or motor home. It will have a weight capacity of 105 lbs for three bikes. Again, if the bumper...
view full answer... - Fitment and Compatibility of Bumper Mounted Receiver Hitch on a 2008 Jayco CamperGood news, the Ultra Fab RV Hitch # UF35-946402 will work for your Jayco 4 inch x 4 inch bumper. This hitch will provide you with a 2 inch hitch receiver opening. It is important to note that since you already have a spare tire carrier on the bumper your total weight must not exceed the 350lbs of tongue weight capability of your bumper. I have linked the Ultra-Fab Receiver Hitch to this page for your convenience.
view full answer... - Is there a Bumper Mount Hitch that Will Fit a 4-3/8 Inch Bumper on an Arctic Fox TrailerBumper mount hitch # UF35-946402 is designed specifically for 4 inch square bumpers so I cannot recommend it on a 4-3/8 inch wide bumper. Hitch # BA-100 would be a better fit since it fits 4-1/2 x 4 inch bumpers. All of the other options are either going to be 4 x 2 or 4 x 4. Also check with the trailer manufacturer to make sure the bumper is rated for use with a hitch.
view full answer... - Hitch Bike Rack Recommendations for 4 Inch Bumper on a Travel TrailerIn my opinion the Swagman Platform-Style 2 Bike Carrier for RV Bumpers, # S64663, is the best rack for use on a 4 inch continuously welded steel RV bumper. This rack folds compactly for storage, will also work in a standard 2 inch hitch on a vehicle, and comes with the bolt on receiver for the RV bumper. This style of rack is super easy to load the bikes on and secures the bikes very well, keeping them from contacting each other or the back of the trailer causing damage. If you need to...
view full answer... - Trailer Hitch Options to Use a Cargo Carrier on a Jay Feather M 218 Travel TrailerWe have several different trailer hitch options that will allow you to use a cargo carrier on your Jay Feather M218 trailer. You must keep in mind that there is significantly more bouncing at the back of the trailer and because of this we recommend taking extra precautions when using a cargo carrier behind a trailer or RV. If you want to use a bumper mounted hitch like the Ultra-Fab Bumper Mount Hitch, # UF35-946402, you will first want to verify the weight capacity of your trailers bumper....
view full answer... - Weight Capacity of Swagman RV Bumper Mount Bike Rack # S80605The Swagman RV Bumper 2 Bike Rack you referenced, part # S80605 will carry 2 bikes weighing no more than 35 lbs apiece. This rack is a good choice for folks with lighter bikes who for one reason or another cannot install a receiver on the back of their RV. Your best bet would be to use a receiver mounted rack, like the Swagman Dispatch, part # S44FR. The rack has a 90 lb capacity, which should accommodate your bikes nicely. The rack could be mounted to a receiver like part # UF35-946402...
view full answer... - Best Option for Bolt On Receiver and 3 Bike Rack on Rear of Jayflight Travel TrailerThe Ultra-Fab Bolt On receiver you mentioned, part # UF35-946402 would be a good choice. The receiver tube has a tongue weight capacity of 350 lbs, which means that the combined weight of the bikes plus that of the bike rack you use shouldn't exceed 350 lbs. Before installing the hitch, I'd highly recommend you consult the owner's manual or Jayco to determine if the bumper has the proper capacity. If the capacity of the bumper is lower than that of the receiver, you'll be limited to the...
view full answer... - Recommended Hitch for Installing Swagman Dispatch 2 Platform Rack S44FR on Travel TrailerCurt's bumper-mount hitch # E-100 will fit your trailer's 4 x 4 square bumper but since it requires a stabilizing strap # 18050 be used with a bike rack, instead I suggest the # UF35-946402 hitch from Ultra-Fab which costs less, offers the same 350-lb tongue weight (TW) capacity and does not require you to use a support strap to help hold the rack's weight. The Swagman Dispatch 2 platform rack # S44FR is an excellent choice. It will fit this hitch and provide both 6-1/2-inches of rise...
view full answer... - Bike Rack for a 2 Inch Bumper Mounted RV Trailer Hitch ReceiverThough the Thule Roadway, part # TH9058 is a compatible fit with the Ultra Fab 2" Bumper Receiver, part # UF35-946402, it is not recommended to be used on a trailer or RV. The distance from the rear axle to the receiver, plus the motion that the trailer has can shake apart the rack. To avoid this, you'll need to pick an RV rated rack. One of our most cost effective racks is the Let's Go Aero NEO2, part # B01748. This is a two bike hanging rack that is rated for RV use. The rack doesn't...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Zach D
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark N.
9/11/2019
This product has preformed as it should, no issues and I can be confident that it will withstand its purpose, thanks again