Swagman Skaha 2 Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches - Wheel Mount

Swagman Hitch Bike Racks - S67SR

This 2-bike rack is perfect for carrying electric bikes and bikes with a carbon frame or custom paint job. An available ramp lets you easily roll your heavy bikes onto the trays. Tilts with bikes loaded for cargo area access.

Features:

• Platform bike rack carries 2 bikes using your vehicle's hitch receiver
• Pivoting upright arms with ratcheting hooks hold your bikes securely by the front wheels
• Sliding wheel straps let you carry bikes with different wheelbases
• Release lever lets you tilt and fold the rack
  • Tilts down with bikes loaded to access cargo area
• Anti-rattle hitch pin reduces movement of rack in hitch receiver
  • Removable adapter sleeve converts the rack for use with 1-1/4" hitches
• Keyed-alike locks deter theft of your bikes and the rack
• Ramp (sold separately) allows you to easily roll heavy bikes onto the rack
• Durable steel construction with black powder coat is rust resistant

Specs:

• Application: 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers
• Carrying capacity: 2 bikes
• Weight capacity: 60 lbs per bike
• Maximum tire width: 5.0"
• Wheelbase: 37" - 50"
• Wheel diameter: 20" - 29"
• Distance from center of hitch pin hole to:
  • Closest part of carrier when folded down: 15-1/4"
  • Closest part of carrier when folded up: 8"
  • Farthest edge of carrier when carrier is folded down: 40"
• Carrier weight: 40 lbs
• Limited lifetime warranty

Note: May interfere with bikes with front fenders.

Rotating Arms with Ratcheting Hooks

The Swagman Skaha has ratcheting hooks that grab your bikes firmly by the front wheel, not the frame. It's perfect for carrying bikes with a carbon frame or a custom paint job. To load your bikes, simply place your front wheels in the cradles, rotate the arms up and over the wheels, and press down firmly on the ratcheting hooks.

Sliding Rear Wheel Straps

The wheel trays have ratcheting straps that secure your rear wheel to the rack. The straps slide along the tray to accommodate bikes with a variety of wheelbases. To secure your wheel, run the strap over the rim and back down through the strap buckle and pull tight. To remove your bike, press the quick-release button on the buckle and undo the strap.

Folding, Tilting Design

The rack tilts with bikes loaded for easy access to your vehicle's rear cargo area. From behind the rack, pull the release lever at the base and tilt the rack down. When you raise the rack back up, it will make an audible click to let you know it's secure. So, whether you're at the trail or the grocery store, you don't have to remove your bikes to access your cargo area.

When the rack is unloaded you can pull the lever to fold it up for storage. This means you don't have to remove it to park in small lots at the trail head or in cramped parking garages.

Easy Installation

The rack installs with a threaded, anti-rattle hitch pin. Simply slide the shank into your hitch receiver, insert the threaded hitch pin, and tighten it down with the included tool. This will reduce noise and movement while the rack is installed.

A removable adapter sleeve is included so the rack can be converted for use with 1-1/4" hitch receivers. The sleeve attaches to the shank with a single screw and can be installed or removed quickly.

Complete Security

The included locks secure your bikes to the rack and the rack to your vehicle. A lock in each release button prevents the ratcheting hooks from being raised, so your bikes can't be removed from the rack. The hitch lock simply snaps onto the hitch pin. The hooks and hitch lock are keyed alike, so you'll only need 1 key for all locks.

Available Loading Ramp

An available telescoping ramp (sold separately) lets you easily roll your heavy e-bikes up and onto the trays so you don't have to lift your bikes onto the rack.

66686 Swagman Skaha Tray Style 2 Bike Rack for 1.25 and 2 Inch Hitches

Replaces 66698 Skaha 2 Plus

Installation Details 

Alternate Instructions