Best Option for Bolt On Receiver and 3 Bike Rack on Rear of Jayflight Travel Trailer

Question:

I have a 33ft jayflight travel trailer that has a 4 inch steel rear bumper that Im wanting to attach a 3 bike rack to, my question to you is would your UF35-946402 bolt on reciever be sufficient to handle this. Thank you for your opinion

asked by: Brad P

Expert Reply:

The Ultra-Fab Bolt On receiver you mentioned, part # UF35-946402 would be a good choice. The receiver tube has a tongue weight capacity of 350 lbs, which means that the combined weight of the bikes plus that of the bike rack you use shouldn't exceed 350 lbs. Before installing the hitch, I'd highly recommend you consult the owner's manual or Jayco to determine if the bumper has the proper capacity. If the capacity of the bumper is lower than that of the receiver, you'll be limited to the lower capacity.

The Swagman Original 3 Bike Model, part # S64152-2 would be an excellent choice. The rack is rugged, and is specifically designed for use behind a travel trailer.

Due to the less sophisticated suspension and long overhang at the rear of a travel trailer, only bike racks that have been specifically designed for use on the rear of a motorhome or towed trailer should be used. The rack will be subjected to additional shaking and jarring forces that wouldn't be experienced if it were installed on a regular passenger vehicle so using an RV approved rack would be very important.

expert reply by: Mike L