Curt RV Bumper Hitch - 2"

See what our Experts say about this CURT RV and Camper Hitch

• Recommended Bike Rack for Trailer with Tilting Bumper Mounted Spare Tire
  For your camping trailer that has a tilting bumper mounted spare tire, I recommend looking at an RV approved hitch-mounted bike rack like the Swagman Dispatch 2 Bike Platform Rack # S44FR. This will slide into a 2 inch trailer hitch receiver and hold 2 bikes of up to 45 pounds each. When the bikes are unloaded from the carrier, the upright mast can be folded down to allow you to tilt back the spare tire on your trailer for rear storage access. This carrier also includes a hitch and cable...
  view full answer...
• What Size Frame Does Curt hitch # C19101 Fit
  The frame of your travel trailer would need to be 2 inches wide and 4 inches tall for the Curt hitch part # C19101 to attach to it. I am not totally sure how you would be using the hitch so this is probably not something we can safely guarantee will work.
  view full answer...
  
• Determining If Curt Bumper Mount Hitch C19101 Can Carry Bike Rack On 1998 Dutchemen Pop Up Camper
  As long as the rear bumper on your 1998 Dutchemen 1203 Pop Up Camper is 2" x 4" then the Curt RV Bumper Hitch - 2" # C19101 you were looking at will work perfectly for you. For a non-trailered load like a bike rack, you will also need to use the Curt Stabilizing Strap # 18050 to keep from voiding the hitches warranty. This hitch has a 350lb tongue weight rating so it will be plenty strong to support your bike rack weighing roughly 160lbs with bikes, but your bumper may not be this strong....
  view full answer...
• Availability of Trailer Hitch to Fit Bumper of 2016 1706 Viking
  Go look at the bumper you have at the rear of your 2016 1706 Viking. What are the dimensions of it? Is the bumper welded all the way around or is there an open side? If there is an open side you have a C-channel bumper which the # C19101 would not fit. It would need to be a 2 inch wide by 4 inch tall continuously welded bumper for this hitch to fit. If instead it is 4 inch by 4 inch you would want the part # E-100.
  view full answer...
• Does RV Trailer Hitch for 4" x 2" Bumper Allow Towing
  You can use the Curt RV Bumper Hitch # C19101 to tow your trailer and Polaris Razor, but you do need to ensure you are within a number of capacities. The hitch itself has a 3,500 lb towing capacity and 350 lb tongue weight capacity so your trailer needs to fall within those numbers. Additionally, you need to contact the manufacturer of your toy hauler to ensure the bumper can handle towing as it may not be designed for that much stress. This could lead to a very dangerous situation for...
  view full answer...
• Recommended Trailer Hitch And Bike Carrier For 2016 Keystone Fuzion Toy Hauler
  You can take a quick measurement of the bumper on your Keystone toy hauler. You said you have a 2-inch and it is not a 4-inch bumper. You may find it is 2-inches wide and 4-inches tall. If that is the case then the trailer hitch I recommend is the Curt RV Bumper Hitch, part # C19101. This hitch has a 350-lb tongue weight capacity and has a 2-inch receiver opening. The other options we offer are for a frame mounted hitch like part # UF35-946403. This hitch will work with I-beam, C-channel...
  view full answer...
• Difference Between Curt RV Bumper Hitches 19101 and 19100
  The difference between the two hitches is the size bumper they are designed to fit. The 19100 # E-100 is designed to fit a 4 inch square bumper and the # C19101 on the other hand is designed to fit a 2 inch by 4 inch bumper instead. Basically you'd need to measure the dimensions of your bumper to know which you would need. Most likely it's a 4 inch square bumper though as that is the most common size.
  view full answer...
• 2006 Jayco Feather Sport 17 ft Trailer Hitch Option
  I looked up pictures of your 2006 Jayco Feather Sport 17 ft trailer and I couldn't find any pictures of a rear square bumper. The best option I can offer is the part # 13703 which can fit frame width of 22 to 72 inches that are I beam, C channel or boxed. You will need to go with an RV rated bike rack though like the ones available at the attached link.
  view full answer...
• Recommended Trailer Hitch for Fifth Wheel Trailer to Tow a Second Light Weight Trailer
  We generally do not recommend towing a trailer with a trailer. It is illegal in many states, so you will want to check with the DMV in any state you travel through. Also you will want to check with the manufacturer of your fifth wheel to see if the bumper on your trailer is designed to support any additional weight due to its construction. Some fifth wheels are, and some aren't. That said, it sounds like you may have a 4 inch continuously welded steel RV bumper so you can use the Curt...
  view full answer...
• Availability of Bumper-Mount Hitch for 2001 Dodge Ram 1500 Pickup
  We do offer one bumper-mount 2-inch hitch receiver intended for use on a pickup truck, Curt Specialty Hitch # E-3S. This hitch is intended for installation on trucks with a step bumper. The hitch you referenced, part # C19101, is meant for use on a 2-inch RV bumper and so would not be suitable. If your Ram has a step bumper Curt hitch # E-3S will offer you the capacity you need: 500-lbs tongue weight and 5000-lb towing capacity. If you do not have a step bumper you can review the linked...
  view full answer...
• Bumper Mounted Trailer Hitch Recommendation for 2 inch Bumper
  The best solution I can provide for you would be a trailer bumper hitch like the part # C19101. This hitch is designed to attach to 2 by 4 inch bumpers, but with a 2 inch spacer you could attach it to your 2 by 2 inch bumper. You would need to provide your own spacer. Or you could go with a frame mounted hitch like the part # 13703. As long as your frame is between 22 and 72 inches this hitch would work well for you. You will need to be sure that you are using a bike rack designed for...
  view full answer...
• Hitch for 2012 Airstream Bambi for Bike Rack
  You can attach a hitch to the frame of your 2012 Airstream Bambi with the Curt multi fit hitch # 13703 which fits all frame styles that are between 22 and 72 inches wide. This would be only option you'd have but also it is a really great option that does the job well. Then for a bike rack you'd need to go with something travel trailer approved since the ride quality is rougher there than at the rear of a vehicle. For that the Kuat Transfer part # KU84FR would be a great option that also...
  view full answer...
• Trailer Hitch and Wiring for a 2007 Saturn Vue
  Actually, if you were to try to install Curt hitch # C19101 it would require a lot more work than the custom fit hitches for your 2007 Saturn Vue. You would have to access the metal bumper beam which would require removal of the rear fascia. Then once you get that removed it is possible, even likely, that the hitch will not fit. Installation of a custom hitch such as # 13591 is much easier as you can see in the video I have linked showing an example installation. I have also included a...
  view full answer...
• Installing A 4-Pole Trailer Connector To 5th Wheel Trailer
  The Curt RV Bumper Hitch, # C19101 is for RV bumper use only and fits 2" x 4" RV bumpers. This will require a customized wiring job as you will probably need to remove interior trim panels to access the taillight wiring of your 5th wheel to evaluate what is the best route. You can also make contact with the OEM and request guidance for best route. Once you find a way into the wiring, simply splice in the 4-Pole 60" Long Vehicle End (Includes 4 wire taps) Item # 18002. I do recommend...
  view full answer...
• Options for Carrying 4 Bikes on a Tent Camper
  There are several options for carrying 4 bikes on your tent trailer, however, determining the best option for you will depend on how your trailer is equipped. The best option would be to use a hitch mount bike rack that is approved for use on RVs and trailers. A bike rack like the Yakima LongHaul 4-Bike Rack, # Y02476, would be a good option. Whichever bike rack you choose you need to make sure it's rated to be used on the back of a trailer. There is more bounce and movement at the back...
  view full answer...
• Bolt Hole Spacing for Curt Bumper Mount Trailer Hitch # C19101
  On Curt bumper mount trailer hitch # C19101 the mounting holes are approximately 6-1/2 inches apart on center. I have linked a video review of this hitch for you.
  view full answer...
  
• Recommended Hitch to Haul Bikes on my RV Bumper
  The Curt RV Bumper Hitch part # C19101 can be a great choice but it does require a full wrap bumper. This doesn't necissarily mean it is solid steel it just means it is boxed or it has metal on all 4 sides. I explain this further in the attached video. Part # C19101 is for 2"x4" bumpers and the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 is for 4"x4" bumpers. Please check your owner's manual to ensure you do not exceed what your camper is able to haul. The Yakima LongHaul part...
  view full answer...
• Recommended Hitch for a 2020 Vanleigh Beacon 5th Wheel Trailer
  I have a couple of options for you depending on what kind of bumper your Vanleigh Beacon 5th Wheel has. If you have the 2" x 4" bumper, that is not a c channel, the easiest way to add a hitch is to use the Curt RV Bumper Hitch item # C19101. This hitch simply bolts to the bumper and provides you with a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. The other option is to install a universal hitch like the Curt Adjustable Trailer Hitch item # 13703. This hitch can be welded...
  view full answer...
• Can the Curt Bumper Mount Trailer Hitch # C19101 be used Upside Down
  You can certainly use the Curt Bumper Mount Trailer Hitch, # C19101, upside down. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. The capacities of the hitch will stay the same and you can gain more ground clearance for your cargo carrier (which can be a big deal at the back of RVs and trailers).
  view full answer...
• Recommended Bike Rack for 4x4 Bumper on 5th Wheel Trailer
  The Swagman XTC-2 # S64670 is a great bike rack but it is not rated for use on the back of a 5th wheel trailer. Instead I recommend the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663. This bike rack is designed for the 4x4 bumper you referenced. I've attached a video to assist. If you just want the hitch and want to consider other bike rack options, I recommend using the Curt RV Bumper Hitch - 2" # C19101. This will allow you to use any 5th Wheel rated bike...
  view full answer...
• Recommended RV Hitch and RV Hitch Bike Racks
  We offer hitch receivers for use on RVs that you can see on the linked page. Both bumper-mount and frame-mount type hitches are made and it will be a good idea to check with your trailer's manufacturer to confirm which type is best for your particular RV. Examples of both types are parts # C19101 which fits 4 x 2-inch bumpers (as long as they are NOT a C-channel type) and # UF35-946403 which fits trailer frames between 47-1/8- and 77-inches wide (measured outside edge to outside edge). Once...
  view full answer...
• RV Bumper Hitch That Fits A 4" x 4" Bumper
  The Curt RV Bumper Hitch # C19101 you mentioned is designed to fit 2" x 4" RV bumpers, and will unfortunately not fit your 4" x 4" bumper. Instead, you're going to want to use the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which will fit your 4" x 4" RV bumper.
  view full answer...
• Hitch and Bike Rack Recommendations For Carrying 2 Bikes on the Bumper of an RV
  We sell RV bumper hitches that would work well for you to carry an RV rated bike rack at the rear of your Montana 5th wheel trailer. If you have a 2 inch square bumper I would recommend the Curt Hitch part # C19101. If you have a 4 inch square bumper I would recommend the Curt Hitch part # E-100. Now for a bike rack you will need to get a rack that is rated for use behind an RV. The ride is much rougher at the rear of an RV when compared to a passenger vehicle, so a rack not rated for...
  view full answer...
• Can Swagman E-Spec Bike Rack on Back of Travel Trailer
  The Swagman E-Spec Bike Rack for 2 Electric Bikes part # S94FR which has a 70 lb per bike capacity can be used on the back of a trailer trailer. In order to do so you'd just need a trailer hitch, the Curt RV Bumper Hitch part # C19101 if you have a square rear bumper or the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 if you don't is what I recommend.
  view full answer...
  

Do you have a question about this RV and Camper Hitch?