B&B RV Heat Vent w/ Rotating Grille for 2" Duct - 4 1/8" Diameter - Polar White

Video Transcript for Review of B and B Molders RV Vents and Fans - Polar White RV Heat Vent Rotating Grille - BM62RR

Hi everybody. Andy here with etrailer.com. Let's take a real quick look together at this B&B Polar White RV Heat Vent with rotating grill. This rotating RV vent is going to fit your two-inch ducting and the vent base is going to mount into the floor, wall or ceiling with the included screws. If you notice the screws here do have their heads covered in white paint, so that's going to match this fitting here, this vent. So, that's a nice touch.

I don't have this grill snap in there all the way just so I can easily remove it to show you. So I just wanted to make you aware of that. Once you have it snapped in, it will be snapped in very securely and lemme go ahead and give you just some overall dimensions just so you can be confident this is going to work for you. So looking at that cutout measurement, we're sitting pretty close to four and one eight inches. So this is, go again, I'm gonna slide into a four-inch opening and then this is going to fit your two inch.

You can see there two-inch flex ducting and as I mentioned, once you have this installed with the included screws, this is just going to snap into place. This louver grill and then that's going to cover those screws and then rotate a full 360 degrees when you have this securely in place. So this is going to allow you maximum flexibility and directing that air where you need it. This is made here in the USA of a durable plastic construction. It is rated for heating, but it can also be used as a cooling vent.

One final measurement I wanted to give you is the overall diameter from end to end. As you can see there, we're sitting right at five and a half inches or so. Well, I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.