Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
(610 reviews)
Price: $211.30
In Stock
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
Item # LC432687
Retail:$234.95
Our Price: $211.30
You Save: $23.65
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (610)
- Q & A (0)
- Photos
Lippert RV Steps - LC432687
- Pull-Out Step
- Towable Camper
- 3 Steps
- 24 Inch Wide Step
- Lippert
- 7 Inch Drop/Rise
- Steel
- 27-1/2 Inch Wide
- No Ground Contact
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Grab handle eases use and keeps hands clear of moving parts
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 24-1/2" - 27-1/2"
- Step dimensions: 25-3/4" wide x 8-3/4" deep
- Mounting bracket dimensions: 27-1/2" wide x 14" tall x 12" deep
- Drop/Rise: 7"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432687 Lippert Components (LCI) Triple Radius Entry Step
Similar to Hickory Springs 953240RFXWC3, 95324EXTALC1, and 953240RFALC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs - LC432687
Average Customer Rating: 4.8 out of 5 stars (610 Customer Reviews)
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Carmen 04/11/2024
Installation was not difficult. Pulled stairs out of box and mounted in about 15 mins. 2x4, jack and one husband! DONE! Did not come with any installation hardware. Good thing I kept the old parts or that would have been a pain, having to go to the store for parts.
by: Linda 05/23/2024
Good sturdy product, it was easy to install on my RV. No hardware came with it so I just used the old from the steps I was replacing.
by: Tim05/17/2023
Trailer not required. Steps completed a stairway to the baptisamal.
by: Mike 09/29/2023
Had to make a slight modification to the mounting bracket on the trailer. Steps are a perfect replacement. Like the ease of operation. Good choice of steps. Very quick service. Ordered on Monday arrived on Wednesday afternoon.
by: Daniel 05/22/2024
steps have worked great and are nice and solid
by: Thomas 05/16/2024
Easy install. Fit perfect. Delivered when promised.
by: Vickie08/26/2023
Our experience with trailer has been great. We were on the road out of our home state when our steps were damaged. We called them and we had our new steps in just a couple days. Friendly staff, prompt service,and quality products.
by: Les08/03/2023
The steps arrived with some shipping damage, but Carol C. in Customer Service promptly shipped a replacement and submitted a pick-up request for returning the damaged item. I got the replacement within a couple of days. etrailer continues to show integrity and a real commitment to its customers! Thanks for running your company with pride.
by: Hugh08/17/2023
Product is a good replacement for our damaged stairs. It was sent to us in the manufacturers packaging which, is suspect, isn't meant for shipping by itself. The box was damaged and the new steps slightly bent and scratched upon arrival. A little tweaking and all is well. Otherwise it fit well. Thanks.
by: Jim08/02/2020
I bought a used fifth wheel that had a broken step on it, so I googled my trailers info and etrailer.com came up with the part number and price, ordered it and got it in four days and in a half hours time with my wife’s help we had it installed using a couple blocks of wood and 2x4.
It feels nice and safe now.
by: Dave08/17/2019
Amazing product and outstanding service. I could not be happier.
I had not seen a set of LCI fold up stairs installed on a step van and George was a lot of help with info I needed. I purchased a used set in case it didn't work and they turned out perfect.
by: Roy06/09/2020
The steps were exactly as described. Easy to install and a perfect fit on my 2006 Montana 3400RL 5th wheel. Shipping was fast and free.
by: Ryan08/04/2023
I had bent up my old stairs and these stairs were super easy to install and work smoothly as a replacement.
by: Keith 08/27/2021
We have sold the RV that I had purchased the steps for and just hung onto them. The RV that we replaced it with has a little better steps so I haven't installed the Solid Step on this one. I still may do it but this RV is a little higher off the ground so I don't know if the 3 step unit is going to be tall enough. The Lippert Solid Step is definitely an upgrade for anyone that has the manual pull out steps on their unites.
by: Charles C.11/21/2016
We have a bunkhouse Cruiser Aire. My wife had polio as a young girl and has problems getting up and down stairs, She is 72 and it became near impossible for her to access the RV. I built her some stairs from lumber and they worked alright, But it also gave me some added chores with a lot of straining to move them from the back to the door for her at every stop. I was absolutely surprised when I discovered the lippert steps with the shorter 6.5" rise. Believe me rise in steps is extremely important to handicapped people. These new steps have given new meaning to access for her. We are very happy we found Lippert steps through E-Trailer! We are going to buy another set next year for the rear door of the trailer. Great customer service and fast shipping! Glad your here!
Charles C.
11/21/2017
Very nice!
by: Ronald 10/19/2023
Great item, it is the only step unit I could find with 7" rise steps.
by: KD10/18/2021
The product was excellent and an exact match to what was already on the travel trailer. 5 stars to etrailer and great service.
Kd
10/19/2022
Since my last review of this product, due to an accident, I have purchased another set. Installation was simple and the steps work great.
by: Lee01/01/2023
The steps are fine, but the 5 stars are for your customer service! I really appreciated the free shipping - as the item is HEAVY - and the speed of the delivery! Sadly, now I have to sit in the snow and repair my camper… . Perhaps I will wait for spring. Thank you!
by: Carl 12/31/2022
It was exactly what I needed. Everything lined up and was easily installed. The only suggestion I would have is to package differently. There were a few dings and scratches on the steps. Bubble wrap or putting the box in a box would have prevented that.
by: Rickey 08/11/2018
Very good product and very strong. Fast shipping. Had to make some modifications, but I was expecting that. They do hang down a little more than I expected but should be fine. Thanks for a great product
by: Don 07/13/2023
Everything fit but had to struggle with it a little bit as the bolt hole was slightly off. Got it together none the less and it works great.
by: Robert06/08/2020
Perfect replacement steps for our travel trailer. Website provided great information to take guess work out of measurements to find a perfect fit.
Robert
6/9/2021
After a year we could not be happier with the steps, easy to install, folds very easy, very sturdy.
by: Ryan 09/12/2023
Everything went hreat
by: Ed S.10/13/2019
We ordered new steps from etrailer for our 5th wheel when the metal tore on one side of our existing steps. We had done our homework - checked others sites. The difference - etrailer had the replacement steps in stock at a better price than most and answered my questions. The steps arrived as promised. Instructions were clear and the install was easy. I was able to do it without help.
by: Mike C05/07/2020
The steps on the 2014 Winnebago travel trailer had rusted-out due to the spring-loaded pieces of grey non skid carpet always being wet in the stowed position. This replacement was a very simple bolt in with a good fitting bolt pattern and easy fold out operation. Of course you should stay on top of it with a little touch-up paint here and there cuz it's going to want the rust in the hinges and wear points but that is to be expected. Good product and I would recommend it
25
609
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Recommended RV Steps For A 2015 Lance Trailer With A 25-1/2" Mounting Bracket Spacing We do carry adapters # LC301704, but with yours new steps sitting further out you might have some issues with the crossbeam of the step hitting the current mounting brackets. If you wanted to make it work you could cut of the older brackets and use the # LC301704 to mount the new steps. If you'd rather just get ones to mount to the current brackets then we do have a few other options available. For Lippert we have part # LC432682, which are designed for a 21-1/2" - 24-1/2" entry height....
view full answer... - Mounting Hole Spacing for Lippert Manual 3-Step Pull-Out Steps for Keystone MontantaLippert Manual Pull-Out Steps - Triple - 7" Drop/Rise - 25-3/4" Wide # LC432687 has mounting holes that are spaced 7 inches apart on center front to back and 26-1/4 inches on center left to right. It sounds like for these to fit some new holes would have to be drilled. That is going to be the case for all of the steps.
view full answer... - Entry Door Opening for SolidStep Manual Fold-Down StepsThe SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames, # LC791575 requires that the door open to at least 90 degrees for the steps to deploy. This set of steps is for an entry height of 35" - 44" and a doorway width of 29" - 36". If your door will not open the required minimum due to restrictions from the entry door gas shock, I suggest you consider replacing it with one that has a longer reach. To determine the correct replacement. all you have to do is measure your...
view full answer... - Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - How to Choose the Correct Steps for TrailerTo find the correct replacement steps for your trailer you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting base to fit. For example, the Lippert # LC432687 has bolt hole centers that are 26-1/4” wide x 7” deep and mounting base dimensions of 27-1/2” wide x 8-3/4” deep; these are triple steps which have a 7” drop/rise. I have added a link to each of our available steps for you to check out as well.
view full answer... - Can 3-Step RV Step Replace 2-Step VersionWhen you go from the 2-step versions of the Hickory Springs steps to the 3 step the mounting brackets do get a bit wider. The part # LC432687 which is the three step version is about 2 inches wider which means you'd need to move your current outriggers or install new ones with the part # LC301704.
view full answer... - Would the Lippert Manual 3 Step LC432687 Fit a 2015 Salem Cruise Lite Travel TrailerThe Lippert Manual 3 step, item # LC432687 can fit nearly all travel trailers so you should be able to have it installed. Here are some dimensions for this step kit that should help you determine if this would replace a set of steps that you currently have easily: Mounting base dimensions: 27-1/2" wide x 9" deep Bolt hole centers: 26" wide x 7" deep If you plan to install these on a trailer that doesn't have steps currently you would also need the part # LC301704 for an attachment point.
view full answer... - 3 Step RV Step Replacement Solution for Brackets 25-1/2 inches in WidthAll of the triple steps we offer like the part # LC432687 that you referenced are 27 inches in width. If you need a triple step you would need to have the mounting brackets on your trailer moved to accommodate these steps. Any qualified fabricator in your area should have no problem moving the mounting brackets to allow the steps to install. Or for a new set of mounts you could use the Outriggers part # LC301704.
view full answer... - RV Pull Out Step Solution for Hay Wagon with 33 inch Floor HeightFor a 33 inch floor height I'd recommend a 4-step pull out step setup like the Flexco Manual Pull-Out Steps for RVs # SMFP-4400 over a 3 step as you'll want that extra step based on the height you have. To help attach the steps to your RV a set of outriggers # LC301704 would be your best option. These will easily attach to your trailer frame and give a set of brackets for the steps to secure to.
view full answer... - Replacement Steps for a 2002 Holiday RamblerIn order to determine what would be the correct replacement steps for your 2002 Holiday Rambler you will need to get the dimensions of the steps that are currently on your trailer and compare them to the picture I attached that shows the dimension of the RV Steps part # LC432687. If the dimensions match what is in the picture the # LC432687. I attached a measuring video for you to check out as well as an install video for the steps that should be very helpful.
view full answer...
- Recommended Low Rise Step for 2005 Forest River Rockwood 28 Foot TrailerThe TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833 is the closest option we have to what you are seeking. The steps have a 7-1/2 inch rise with steps that are 20 inches by 8 inches. The overall width is 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. It has leveling feet to help with uneven ground. If you need a smaller width, the only option we have is the Brophy Scissor Step # SS03 in black or # AS03 in aluminum. These are 17 inch...
view full answer... - Replacing RVs 2-Step With a Manual Pull-Out 3-StepThere are 24" wide options for three steps that are manual pull-outs similar to the Lippert # LC432687 that you referenced. You may want to consider the Flexco # SMFP-3100, which has step dimensions of 24" wide x 9" deep, mounting base dimensions of 28-1/8" wide x 9-3/4" deep, a bolt hole pattern of 25-3/8" Wide x 5-1/2" deep (from first to second bolt hole) 25-3/8" Wide x 7" deep (from first to third bolt hole) and drop/rise of 8". The Flexco # SMFP-3200L is a similar product but has a...
view full answer... - RV Step Recommendation Where Mounting Bracket is 27-1/2 inches in WidthAre measurements are not like lumber measurements that round up. If the overall width of your existing steps is 27-1/2 inches then the Manual Pull-Out Steps # 953240RFALC1 are going to be the best option.
view full answer...
- Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- Travel Trailer Triple Step Recommendation that is 24 inches WideThe part # LC432687 that you referenced is a 24 inch wide triple step, but the rise between each step isn't 7 inches. From the first to the second step it measures 8-1/2 inches, from the second to third it is 8 inches, and from the third to the fourth it measures 7-3/4 inches. The other option we have is the part # SMFP-3100 which is also a 24 inch wide quad step, this one has 8 inches between each step.
view full answer... - Will Lippert Pull Out steps part # LC432687 Fit 2017 Forest River Sandstorm 282SLRYes, the Lippert Pull Out steps part # LC432687 that you referenced will fit your 2017 Forest River Sandstorm 282SLR. These steps are all basically made to the same dimensions. If what you have now though is a 2 step setup it would be a bit narrower than these steps. So if that is the case we have new outriggers (mounting brackets) as part # LC301704. These steps are brand new.
view full answer... - Replacement 3-Step Manual Pull Out Steps for an RV or TrailerThe overall width of the Alumi-Tread Manual Pull-Out Step # LC432696 is 27-3/4 inches. The outriggers on RVs that the steps mount to is a standard size but depending on where you are measuring it can seem like there are a bunch of different sizes. So it is possible, even likely, that these steps will still fit with some slight persuasion. Similar steps such as # LC432687 also fall into the same size as the above steps. The overall width of these is 27-1/2 inches. If you are replacing 3...
view full answer... - Fold Down RV Step that Fits 2019 Puma 19RLCThe correct fitting fold down step that fits your 2019 Puma 19RLC is the Lippert StepAbove part # LC713662 which was designed for 24 inch wide doorways like you have and fits entry heights between 22 and 28 inches so your 26 inch measurement would work perfectly.
view full answer... - Key Dimensions for Selecting Replacement Triple Step Unit for Jayco Travel TrailerYour photo did not make it through to us but we can still help you select replacement steps for your Jayco Jay Flight 28BHStravel trailer. The RV steps we offer for towable trailers come in several overall widths. You can see all sizes and models on the page I linked for you. You will want to match the overall mounting pattern of the new step to your existing unit. You will also want to ensure the new step unit does not reduce your ground clearance; keep the existing step's retracted height...
view full answer... - Triple Step Recommendation for a 2010 Springdale SRTThe Triple Step part # LC432687 would work for you and could potentially install pretty easily depending on where you measured the distance between the mounting brackets. I attached a picture and a set of installation instructions that have the dimensions of this step listed for you to check out. You may already have outriggers installed on your 2010 Springdale SRT, but if not you would want the part # LC301704. I also attached a couple helpful videos for you to check out as well.
view full answer...
- Is 27-1/2 inch RV Step Mounting Bracket Width Normal Size27-1/2 inch wide mounting brackets is very common for RV steps as that's what is most commonly seen on RVs. That's why RV steps like the part # LC432687 have overall widths that match that.
view full answer...
- Can a Lippert Three-Step Pull-Out Directly Replace a Two-Step Pull-Out?The two-step Lippert Manual Pull-Out Step, # LC432682, has step dimensions of 24-1/4 inches wide x 8-1/4 inches deep, with mounting base dimensions of 25-1/4 inches wide x 8-3/4 inches deep and bolt hole centers measuring 24 inches wide x 7 inches deep. The three-step version of the Lippert Manual Pull-Out Step, # LC432687, has the same step size but a slightly different mounting base dimensions of 27-1/2 inches wide x 9 inches deep, with bolt hole centers measuring 26-1/4 inches wide...
view full answer...
- Distance From Top Step To Bracket While Stowed On the Lippert Manual Pull-Out Steps LC432687In regards to the Lippert Manual Pull-Out Step for RVs part # LC432687, the distance from the top of the first step to the top of the mounting bracket while in the stored potion is 3.63" according to Lippert. If this was not what you were looking for please just let me know.
view full answer... - Stromberg Carlson Outriggers Recommendation for a RV Manual Pull Out Step InstallationIf it were me I would go ahead and purchase the Outriggers for Stromberg Carlson RV Manual Pull-Out Steps # LC301704. This product will give you more flexibility for installation of the RV Manual Pull out Stairs # LC432687 on your RV, and most likely you will need them.
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Keith
8/29/2022
We have not used the steps on our newer 5th wheel because the steps are about a 14 too wide for the doorway. I still would recomend the Solid Step for anyone wanting to to upgrade their entrance steps. They are have a greater tread depth than most standard steps. They are more stable seeing as they are contacting the ground.