Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum
(173 reviews)
Price: $425.57
In Stock
Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum
Item # LC432698
Retail:$471.98
Our Price: $425.57
You Save: $46.41
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (173)
- Q & A (0)
- Photos
Lippert RV Steps - LC432698
- Pull-Out Step
- Towable Camper
- 4 Steps
- 24 Inch Wide Step
- Lippert
- 8 Inch Drop/Rise
- Aluminum
- 28 Inch Wide
- No Ground Contact
This 8-1/2" deep, quadruple manual pull-out step adds a sleek, euro-style look to your RV. Steps are constructed of lightweight, rustproof aluminum and the linkages and frame are made of strong steel. Anti-slip design offers excellent traction.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Anti-slip design offers excellent traction
- Textured surface provides traction in wet or muddy conditions
- Rubber strips help to prevent slipping
- Aluminum step platforms are rustproof
- Lightweight construction makes extending and retracting the steps virtually effortless
- Grab handle eases use and keeps hands clear of moving parts
- Powder coated steel frame and linkages are corrosion resistant
- Sleek, euro-style design
Specs:
- Entry height: 36-3/4" - 39-3/4"
- Step dimensions: 24" wide x 8-1/2" deep
- Mounting bracket dimensions: 28" wide x 16" tall x 12" deep
- Drop/Rise: 8"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 28" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432698 Lippert Components (LCI) Alumi Tread Hybrid Aluminum and Steel RV Step 358991 - Quad
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Alternate product found
Customer Reviews
Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum - LC432698
Average Customer Rating: 4.8 out of 5 stars (173 Customer Reviews)
This 8-1/2" deep, quadruple manual pull-out step adds a sleek, euro-style look to your RV. Steps are constructed of lightweight, rustproof aluminum and the linkages and frame are made of strong steel. Anti-slip design offers excellent traction.by: Richard02/22/2023
Had to replace the original steel (quad) steps on my 16 Cardinal. I don't believe Lippert still makes the Quad steel with rounded edges any longer. Ordered these and they were an exact fit with no modifications or additional hardware necessary. Ordered on a Monday, arrived Wednesday, installation done in less than an hour. Etrailer is awesome!
by: James03/21/2024
I originally ordered some steps that we decided wouldn't work. I contacted etrailer and they were able to cancel my order before it shipped. I was able to order these. They were priced well, were shipped promptly and we received them in good condition.
by: Frank D03/06/2017
ETrailer was easy to do business with and the steps were delivered sooner than expected exactly as advertised
The steps are exactly what we wanted. The installation was a bit of a job because our cedar creek steps were 27" wide and these are 28" so had to move one of the mounting brackets but I knew this going in. Once I got the bracket moved they went on easy. The reason for replacing the steps were twofold first the original steps treds were 9" apart and only 3 steps. Second they were the slide in type which was hard to operate mdw is a petite lady and she could not operate them she is also vertically challenged so the 9" step was uncomfortable
With the new 4 step steps they are only 8" step and they fold in very easy for storage. mdw is very happy with the new steps.
They also look very nice
Frank D.
3/6/2018
We have had these for about a year and We Love them one of the best upgrade we have made to our 5th Wheel mdw loves them she can fold and unfold without any issues at all we would highly recommend these steps
by: Lindle02/18/2024
I used these steps on my last fifth wheel. We loved them. The same as before, the best price is at etrailer.
by: Libbie09/26/2023
We love the steps and called you to get the correct measurements, however when they arrived they were over by 5/8”. We managed to get them to fit by using a pry board and Jack but it was hard..took 2 hours to get it banged in there. Once it was aligned it became a 15 minute job. Thankfully we were able to get them to work. These replaced the original steel steps which had fatigue cracks in them. Love the ease of pulling out and lightness of the whole step.
by: Allen02/27/2020
Replaced original heavy steps on our 2015 Cedar Creek Hathaway fifth wheel. The stairs fit perfectly into the existing space and bolt holes. Shipping was quick, item was packed well. The only problem was no hardware included ?? we re-used the old stuff.
Victoria B.
2/28/2020
These steps do not come with the mounting hardware included. It is available separately as part # LC118155-72.
by: David R 07/29/2017
Really good looking product. Install was easy. Loke the added step and spacing on these steps. Makes entry and exit from RV a lot easier. 2011Bighorn 3185RL
David R.
8/4/2018
Still working great..
by: Gary 10/01/2023
Good quality product. Only issue was width between mounting bolts was 1/4” wider than my bracket on trailer. Little modifications and it went on just fine.
by: Richard06/23/2018
Needed this quad step after lifting my fifth wheel trailer 6". The shipping box arrived with a few holes in it from the bottom bracket of the step frame rubbing in transit or from loading. I was hoping that none of the parts slipped out as that would have been a bummer. After opening the box, I found that the instructions and any mounting hardware were not in the box, if supplied? I went to the e-trailer web site and found that the instructions for installations were not yet available and Lippert web site did not have any instructions posted. No big deal as the mounting points were that same as my factory step on the trailer. after removing the old steps, I placed the new steps up to the factory mounting bolts and found that the new frame was 1/4" to far apart. I decided to pull the front corners of the frame in to fit the factory mounts, as they were installed in the floor of the trailer and could not be relocated. After pulling the frame in, i was able to bolt the front frame mount to the trailer. I needed to pull the rear of the step frame in as well to use the factory side mounting brackets. Overall, it took my about an hour and a half to install the step because of the fitment issues. The steps are secure, fold in and out with ease and feel very sturdy entering and exiting the trailer. After the fitment issues and pulling the frame in, my only concern was that the center top race was bowed down due to the compression. Other than how the brace looks, it dose not hinder the use of the steps.
Without the instructions, I made it fit.
by: Rush B.07/26/2017
Excellent Product and well built. Installed on a Fire Truck to provide ready access to a large storage cabinet. (See attached Picture) We tested with one of our relatively beefy fireman in full turnout gear. I bolted the top bracket to bottom of box, added (3) 1 1/2" x 1 1/2" braces from back of frame to truck frame. Super sturdy, folds easily out of way. (see attached Pic)
by: David 04/26/2024
Great customer service!
by: David Gunn09/08/2017
This my second set of steps from this company. Both arrived in damaged boxes. The product is good, shipping is very slow, communication is very good but packaging and shipping time is poor!
by: Richard09/13/2018
The steps arrived on time and it took less than an hour to install them. We replaced a three step version with this four step version and my wife says it makes the entry much easier. Easy to use and look good.
by: Kenneth Rice 07/28/2018
These steps work great on my travel trailer, easy to put on and great to use
by: David 08/26/2023
Bolted right up perfect proportion to get in the camper folds up easily
by: 01/23/2023
Installed the engine heater a year ago. The pickup resides in my garage. Have not had to use it. Will be for emergency use while traveling, etc. Easy install.
by: Randy T02/22/2018
Great steps, they are a huge improvement over the stock ones that came with our Voltage TH. This is the second set we have installed and installation is fairly easy. They don't rust like the originals, they provide decent traction when wet and our puppy does not get his claws caught on anything like he did on the OEM ones. Additionally, they are lighter and so much easier to operate. The free shipping and price moved this project to the top of our to do list!
Randy T.
2/24/2019
Doing well at 1 year. They still move easily and the finish is holding up nicely.
by: Bobby 01/25/2023
I ordered rv stairs online 2 hrs later, and my order was shipped. WOW definitely will order from this site again. A++
by: Big Dave06/29/2022
5 stars all day long. We purchased these steps because we didn’t like the Moryde step that fold up into RV doorway that came with RV. That style was just not for us. These new steps are very sturdy and exactly what we wanted. Keeping the steps and dirt outside the RV. And no more adjustment needed when using original drop down steps. The instal was easy. A few measurements and cut out the skirting and the new steps fall into place. Should have done it sooner. Thanks etrailer for having all the information and parts to do any RV job.
by: Big R08/22/2022
The steps fit perfectly below our door replacing the fixed ladder from the dealer. We needed the folding steps to access our 5th wheel when it is stored in our garage.
by: Ken06/07/2018
My new rv came with a pull down solid step. Thought I’d really like it but it’s not for me. Replaced it with this awesome aluminum 4 step fold out.
Ken
6/7/2019
Love it
by: Patrick H10/23/2017
Worked great, used it for a church bapt istry
by: Kevin02/12/2018
These steps were what we needed for our Travel Supreme Rally Sport Toy Hauler. The factory steps were a little short and we had to either step high for the first step or use an alternative means of a fourth step.
Had to modify the top mounting holes, and add an l-angle bracket to support the back side of the new steps, but the wife is happy.
May purchase another set for the rear door.
by: David03/29/2018
During the past year it has much easier entering and exiting my rig. No matter the the type of camp site or leveling position of my 5TH wheel. there has been NO need for extra steps. Great purchase and glad I did.
by: Papa Smurf 07/22/2017
These 4 steps are just what we needed to replace the 3 steps. The 3 steps were too wide apart. We were able to install the new 4 steps fairly easily. They fold up nicely and look great. The fourth (last step down) does not have as much support as the other three steps. Although the fourth step appears to be sturdy enough, we may build a wood platform for the fourth step to rest on to add additional support. Other than that, time will tell if these steps hold up to the traffic of going in and out of our 5th wheel RV.
25
173
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Will Alumi-Tread Manual Pull-Out Steps Fit in a 27-5/8 Inch Wide MountIt probably would not take too much to persuade the slightly wider set # LC432698 into the mount of your old steps. This is provided the mounting holes are the same. On the new steps the mounting holes are spaced 7 inches apart on center front to back and 26-3/4 inches side to side. If that matches up I am sure you could get the new steps to fit.
view full answer... - What Hardware is Needed to Install Alumi-Tread Manual RV Steps # LC432698To install the Alumi-Tread steps # LC432698 you will need four 3/8"-16 x 1" grade 2 bolts and 4 matching nuts. Two self-tapping 1" x 1/4" screws will also be needed if using step support brackets. Hardware is not included. Lippert's installation instructions are as follows: Take off the existing step by removing the lag bolts, which secure the step to the floor, and the step bolts from the outriggers. NOTE: If the existing step has a support bracket, remove the screws securing the step...
view full answer... - How To Confirm Fit Of the Alumi-Tread Manual Pull-Out Steps On a CamperThe Alumi-Tread Manual Pull-Out Steps part # LC432698 are designed for a mounting bracket 28" wide. In order to confirm fit you'd need to measure the exiting mount bracket. If it does not match you could make them compatible with new brackets, the Lippert Outriggers for Manual RV Steps part # LC301704 or you could go with another option that better closely matches what you have on the trailer now. I unfortunately would not have any information about the mounting brackets on any one particular...
view full answer... - Replacement RV Steps w/ 8 Drop/RiseI understand the need to lessen the drop/rise. If you are okay with bottom step setting close to or possibly against the ground then the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum, # LC432698, should work for you. Another option with an 8" drop/rise is the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Triple - Aluminum, # LC791572. This has legs at the bottom of steps that are adjustable but the others have that wanted...
view full answer... - Determining The Correct Replacement RV Steps For A 2015 Keystone Montana 3155RLThere isn't a guide to tell us the correct replacement steps for your Montana so we'll need to do a bit of measuring first to determine the correct replacements. For pull-out steps you'll need to measure the width of your current mounting brackets and the the entry height (ground up to the mounting brackets). The Alumi-Tread Manual Pull-Out Step for RVs # LC432698 you were looking at has a 28" wide x 16" tall x 12" deep mounting bracket dimensions and fits an entry height of 36-3/4" - 39-3/4"....
view full answer...
- Will Lippert Alumi Tread Steps part # LC432698 Fit 2018 Grand Design Reflection 303 RLSThe Lippert Alumi Tread Steps part # LC432698 were specifically designed for use on fifth wheel campers so this would be a great choice. Most RVs will have the needed brackets but if not you would need to have the Outriggers part # LC301704 installed on the frame of the RV as well.
view full answer... - Would Lippert Alumi Tread Steps LC432698 Fit 2008 Palomino Puma 26RLSSThe Lippert Steps part # LC432698 that you referenced is designed to fit most trailers like your 2008 Palomino Puma 26RLSS. The dimensions of it are going to closely match what you have but you will need to check to make sure. This overall width is 28 inches and the distance between mounting holes on top is 26-3/4 inch. Check out the picture I attached for more info.
view full answer...
- How to Tell if the Pull-Out Step for RVs # LC432698 Will Fit a 2014 Cedar Creek 38CK 5th WheelMost aftermarket RV steps will replace the OEM steps without modification. The same is the case for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 that you referenced. These steps do have a weight capacity of 300 lbs so they are pretty sturdy. I am attaching some photos that give the different dimensions of this step. You can use these to compare them with your current steps and brackets for fitment. If they happen to not have the same mounting dimensions you can always have the...
view full answer...
- Can Lippert 3-Step Alumi-Tread RV Steps be Replaced with 4-StepYes, the Lippert Alumi-Tread Manual Pull-Out Step 3-Step # LC432696 uses the same bolt pattern and can be replaced with the 4-step set, # LC432698.
view full answer... - Recommended 4-Step Assembly for 2012 Voltage Model 3950As you mentioned, the Lippert Alumi-Tread Manual Pull-Out Step # LC432698 referenced in your question has a mounting base that is 28 inches wide. This is awfully close to the 27-1/2 inches of space that you have, close enough that you should be able to persuade this wider set into the mount of your older step assembly. You will also want to check the bolt pattern on your existing hardware to ensure this will match up. The bolt hole centers on this unit are 26-3/4 inches wide and 7 inches...
view full answer... - Alumi Tread Pull Out RV Step to Fit in Place of Lippert SolidStepWidth wise the Lippert steps # LC432698 are going to fit great but the height of them when folded out would be an issue. From the top of the mounting bracket to the ground is 30-3/4 inches which is only a couple inches less than from your door to the ground. This to me would indicate that the lowest step wouldn't be able to fold out. So instead the three step version part # LC432696 would be your best option.
view full answer... - 4 Step Recommendation for RV with 30 inch Wide Door OpeningHow wide are the mounting brackets of your current step and what style of step is on there now? Could I get a picture? The part # LC432698 might be a good 4 step solution. The steps are 24 inches wide and the mounting bracket is 28 inches wide.
view full answer... - Mounting Bracket Width for the Alumi-Tread RV Steps # LC432698The more steps the RV step set has typically the wider the mounting brackets are. Sometimes by only a matter of a half an inch like the Alumi-Tread part # LC432698 that you referenced. You may need to outriggers to install these steps like # LC301704 which would require you to remove your old ones to install these.
view full answer...
- What Color Is On the Underside of the Last Step for the Alumi-Tread Manual Pull-Out StepsI spoke with Lippert but they were not able to provide much information on the color of the under side of the last step on the Alumi-Tread Manual Pull-Out Step part # LC432698. That said, I searched our reviews and the most recent ones show the underside of the last step being black. There would not appear to have been any notable design changes.
view full answer... - Weight of 4-Step Alumi-Tread Manual Pull-Out Step for RVsThe Alumi-Tread Manual Pull-Out Step for RVs # LC432698 weighs about 78 lbs. While these do use aluminum steps, the main body and all of the brackets that link the steps together are steel which is why it weighs so much. For steps that are much lighter and actually perform better I highly recommend the TorkLift GlowStep Revolution Scissor Steps # TLA8004 which weighs in at about 54 lbs. These are designed for an entry height that is 32-1/2" to 44" and the mounting bracket is 27-1/2" wide...
view full answer... - How Do RV Step Outriggers InstallOutriggers such as # LC301704 bolt to the sides of steps such as # LC432698. The outriggers will bolt to the RV frame. For hardware to attach the steps to the outriggers use # LC118155-72. The specific location and orientation of the outriggers depends on the RV/trailer. There isn't one set way they would have to be installed. And some applications do not use the outriggers. The installation of the steps is as follows: 1. Ensure step is completely back up against the step supports on...
view full answer... - What is Needed to Fit Alumi-Tread Quad Steps #LC432698 to Trailer With Narrower BracketsThe mounting brackets of your trailer will need to be moved out a bit to match up with the part # LC432698. This shouldn't be too difficult at all but you will want to check the brackets of your current setup to see how they attach to the trailer to determine exactly what will be needed to move them out.
view full answer... - Recommended Undermounted RV Steps For A 28" Mounting Width And 34" Entry HeightThe only undermounted RV step we carry that would fit your 28" mounting bracket width is the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum # LC432698. It is 30-3/4" tall so the bottom step will sit approximately 3"-4" off the ground when used with a 34" ground clearance. It has an 8" stair rise.
view full answer... - How Much Does the Lippert Components Alumi-Tread Manual Pull-Out Step # LC432698 WeighThe Lippert Components Alumi-Tread Manual Pull-Out Step for RVs # LC432698 that you referenced has a shipping weight of 80 lbs so after it is unpacked will weigh around 75 lbs. It has a weight capacity of 300 lbs.
view full answer... - How to Determine if Alumi-Tread Manual Pull-Out Step Will Fit 2018 Montana LegacyYou just need to verify that you have enough space for the mounting bracket dimensions of 28" wide x 16" tall x 12" deep under the doorway of your 2018 Montana Legacy for the Alumi-Tread Manual Pull-Out Step # LC432698. If you already have mounting brackets then you need to also ensure that the mounting hole spacing is 26-3/4" x 7" but if you don't have mounting brackets then you need the Outriggers # LC301704. I have attached a review video where these dimensions are shown for you to check out.
view full answer...
- Could Alumi-Tread Manual Pull-Out Step # LC432698 Fit Northwoods Arctic Fox 2016 29kThe Alumi-Tread Manual Pull-Out Step # LC432698 that you referenced will fit your Northwoods Arctic Fox 2016 29k 5th wheel one way or another, but you may have to use the outriggers part # LC301704 to provide you with new mounting brackets for the step as not all trailers have bracket dimensions that are compatible.
view full answer... - Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - Replacement Options For 24 Inch Wide Quad Steps For RVFrom what I could find the SM-24-40 are just 24 inch wide quad steps for an RV, and we have a couple of options that could replace those, depending on your entry height and mounting bracket dimensions. For a 34" - 37" entry height and if you have at least 28-1/8" wide x 18-1/2" tall x 12" deep dimensions for a mounting bracket you can use the Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide # SMFP-4400. For a 36-3/4" - 39-3/4" entry height and if you have at least...
view full answer... - Recommended Steps for Upgrading From Lippert 3 Steps to 4 StepsIt should be pretty easy to swap the steps out depending on what model you currently have. I have linked a help article below that will walk you through how to measure your entryway so you can make sure you're purchasing the correct one. I have listed our options for Lippert 4 steps below: Lippert SolidStep RV Steps for 29" to 36" Wide Doorways item # LC791575 Lippert SolidStep RV Steps for 25" to 28-7/8" Wide Doorways item # LC791574 Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise...
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Kathleen M
Updated by:
Shelly K
Updated by:
Halie H
Installed by:
Cole B
Installed by:
Steven C
Installed by:
Randy B
Written by:
Chelsea B
Video Edited:
Chris R
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard
2/23/2024
Still working perfectly! The old steps were so hard to pull out and push back in. These can be done with 1 finger! No rust or any issues whatsoever! I really wish Id swapped them out sooner. While I know many folks may like the style that folds up inside the unit, I prefer these so it is easier to get in and out of the trailer when it is parked for storage.