bing tracking image
  1. RV Slide Out Parts
  2. Steele Rubber
  3. Bulb Seal
  4. Seals
  5. 3/16 Inch Wide
  6. 30 Feet Long
Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 30' x 1" Tall

Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 30' x 1" Tall

Item # SR79FR
Our Price: $147.99
RV Slide Out Parts
Shipping Weight: 6 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out. Great Prices for the best rv slide out parts from Steele Rubber. Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 30' x 1" Tall part number SR79FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (82)
  • Q & A (0)
  • Videos (1)
  • Photos

Steele Rubber RV Slide Out Parts - SR79FR

  • Bulb Seal
  • Seals
  • 3/16 Inch Wide
  • 30 Feet Long
  • Steele Rubber

Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.


Features:

  • Rubber seal replaces worn out weather stripping around slide outs
    • Typically found on the inside edge of the slide-out outer wall
    • Ideal for Thor Citation RVs
    • Commonly paired with bulbless wiper seals (SR29FR or SR96FR - sold separately)
  • Bulb design compresses evenly to prevent side-flop and for greater surface contact
  • Easy installation - slide into onto existing track and trim any extra seal
  • EPDM dense rubber construction won't shrink, crack, or fade over time
    • Resistant to UV damage
  • Dimensions: 30' long x 13/16" wide x 1" tall
  • Made in the USA


99-4374-265 Steele Rubber Products RV Slide Out Bulb Seal - 30' x 1"





Video of Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 30' x 1" Tall

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Steele Rubber RV Slide Out Parts - RV Slide Out Rubber Bulb Seal - SR79FR

Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at this Rubber Bulb Seal for your RV's Slide Out. This seal prevents water from leaking into your slide out on your RV. This will slide into the track that is on the inside edge of your slide-out wall. When it closes, it will seal against the camper wall or the slide-out wiper when the slide-out is fully retracted and it's gonna give you a nice tight seal there.

You can see this is gonna provide plenty of surface contact has this flattens out. It gets wider so that you'll have lots of contact there to make sure that the seal is gonna be sufficient or keeping out any water or pests. It's also going to prevent collapse. So, even if we squeeze it beyond flat, it will pop right back out so it's gonna be very durable for you. This is commonly paired with a wiper seal on your slide-out.

This will work with the two part numbers that you see on the screen there. So depending on your setup, your RV, one of those should work for you, work with this to make sure that water is going to stay out of your RV so you don't have to worry about mold and that sort of thing being brought into your RV where it can cause damage. So as far as our measurements go, this is right about 3/4 of an inch wide. When I measure the height, measure it at just over an inch, call it an inch and an eighth overall and then we are going to get 30 feet of the seal. So it should do a great job of wrapping around your entire slide out so that you have plenty of a connection there and plenty of seal to keep out that water or pests.

Now, there are other options available here etrailer.com. So, if this isn't exactly the kind of seal that you need, I would encourage you to check out some of those other options. Make sure that you're getting the one that's going to fit for your RV but this is made here in the USA. So, you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So, it should do a really good job for you.

Hold up really well for a nice long time. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..

Customer Satisfaction Score:


Customer Reviews

Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 30' x 1" Tall - SR79FR

Average Customer Rating:  4.7 out of 5 stars   (81 Customer Reviews)

Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.

by:

Overall, easy to install with the exception of the top piece, as I didn't want to undo the slide shade. Seal works well with no problems. Thanks!



by:

So far, so good! Definitely much better than the original installed on the coach. It’s a bit tricky pushing it through the grooved track, especially if it’s a longer slide out. You have to push it then pull it from the other side. Some silicone sprayed in the track helps.



by:

Purchased this item and SR47ZR Wiper Seal for my 2011 Outdoors RV Wind River 2702BS. These items were a perfect match to the original and pretty easy to install. The bulb seal was a little more difficult than the wiper seal. Helpful hint clean out the rail that the bulb seal slides or pops into. I was surprised at the amount of dirt and build up inside the track. I used a little white grease in the track and it made popping the bulb seal in much easy. The wiper seal just clips over the metal flange. I used a rubber mallet and small block of wood to make sure the c-clip sealed on the flange. A great product from Steele Rubber Products and great service and price from Etrailer.



by:

Part came in exactly as advertised, shipping was very quick (order was placed on Sunday, parts were in my hand on Tuesday). Company sent several emails to let me know status of order. Website was easy to navigate and find part I was looking for. Due to positive experience I will continue to deal with etrailer!



by:

Quick shipping. Winter is on our door step so time is important to get the seal and install it. The bulb seal was easy to install and I was impressed with the quality of the rubber.



by:

Fast Delivery.



by:



by:

They look great when they ship to you but after 2 mths in the heat and cold, the slides stick to them like glue and pull them off the track channel. No amount of different lubes seem to help. WD40, nope, Axle grease (moly type), Nope, even a lard based oily lube would not stop them from sticking. The slide was cleaned with alcohol and thinners to get any debris off and them lubed as well and they still stuck. I spent more time trying to get them back in the track on a garbage can in the RV parks than they spent on the trailer driving down the highway. Would I get them again, probably cause that's all thats out there.



by:

Seal don’t react to slide because of the rubber is too stiff. Slide won’t come in properly. I am out the cost of a 30’ roll.
Beware of steels rubber wiper seals



by:

Your service was excellent and the how to video on your web site was extremely helpful



by:

Quality of material is still excellant after 1 year.



by:

Very industrial if that is what you need. Match the wiper which is a plus. Harder then oem to slide together without good finger strength.



by:

Product was far superior the original seal. Should last longer with a better seal.



by:

bulb seals worked great. Easy to install. Shipping was fast.



by:

The seal is good as the oem seal it will replace. I will replace the outer slide out seals on my RV. It solved the split seals after 14 years of service on my RV.



by:

I am very pleased with the help and the way my order were taken care of. When I placed the order I was helped to assure that I had all that I needed to take
care of my project on my RV. The product is great and very easy to work with it exceeded.my expectations. Would highly recommend this company and the people that you deal with when ordering product



by:

This worked great, should have bought first. Don’t waste your time with the D channel seals on [online vendor]. The lips that go into the channel are so thin and flimsy that the seal keeps popping out. This seal from Etrailer is much stiffer and works great. I installed it by myself but two people would have been nice - one to slowly push the seal on and make sure it stays on the channel and the other person to slowly pull it across the length of the slide. Regardless, it’s a pretty easy install and saves you several hundred dollars vs having the dealership do it.



by:

Used it in a 2019 Salem forest river slide out, this is the closest thing I could find, slips over the scraper channel but seems a little loose, I hope it works out..



by:

From ordering ,shipping and installation everything went really smooth. My son and I put. On new wiper and bulb seal with no problems. Seal seem to be of better quality than original seals. Will use etrailer again Thanks for a trouble free experience



by:

I have bought multiple purchases from etrailer All the parts have met expectations. I am very pleased with the products supplied. At the end of the purchase they have multiple gender options. There are only 2 genders I will not buy another part due to I am no bowing down to this ideocracy. The end



by:

This D-Seal is a better than the D-Seal installed at the manufacturer it is heavier and appears to hold its shape.



by:

ETrailer has been great to buy from. Highly recommend to anyone looking for truck or trailer parts.



by:

worked good on 2012 hartland trailer



by:

Etrailer has everything! Awesome store. ..



by:

Perfect fit


25
76
Show More Reviews

See what our Experts say about this Steele Rubber RV Slide Out Parts

  • How to Determine the Correct Rubber Slide Seal for a 2015 Denali 316RES
    In order to pick out the correct seal for your 2015 Denali 316RES you 're going to need to cut off a piece of your existing seal and measure the height and width and take note of the seal type as well. For example, the Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted # SR79FR measures 13/16" wide, 1" tall, and is a bulb style seal. If you're able to let me know what you're needing, I'd be happy to help you.
    view full answer...
  • How To Determine The Correct Slide Out Seal Bulb For A 2004 Keystone Sprinter
    To know exactly what bulb size you'll need for your 2004 Keystone Sprinter you'll need to measure what you currently have. Manufacturers unfortunately don't list what they use and have been known to run out of one type of seal and just use whatever is on hand to finish the job. You should be able to measure the track at least to see if the 3/16" Rubber Bulb Seal for RV Slide Out # SR79FR will be compatible.
    view full answer...

Do you have a question about this RV Slide Out Part?


Info for this part was:

Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H
Employee Michael B
Installed by:
Michael B
Employee Cody B
Updated by:
Cody B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.