bing tracking image
  1. Trailer Door Parts
  2. Steele Rubber
  3. Seals
  4. Half Round Seals
  5. 3/4 Inch Wide
  6. Rubber
Rubber Large Half Round Seal for RV and Trailer Doors - Stick On - 30' Long x 1/2" Tall

Rubber Large Half Round Seal for RV and Trailer Doors - Stick On - 30' Long x 1/2" Tall

Item # SR26ZR
Our Price: $159.49
Trailer Door Parts
Shipping Weight: 2 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install. Great Prices for the best trailer door parts from Steele Rubber. Rubber Large Half Round Seal for RV and Trailer Doors - Stick On - 30' Long x 1/2" Tall part number SR26ZR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2)
  • Q & A (0)
  • Videos (1)
  • Photos

Steele Rubber Trailer Door Parts - SR26ZR

  • Seals
  • Half Round Seals
  • 3/4 Inch Wide
  • Rubber
  • 30 Foot Long
  • Steele Rubber

Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.


Features:

  • Rubber seal is used for weatherproofing the doors and hatches of your RV or trailer
  • Skirting around recessed adhesive protects connection from the elements
  • Peel-and-stick installation with pre-applied 3M adhesive backing
    • Remove backing and apply the seal to the frame
    • Surface preparation recommended to remove any old adhesive
    • Use scissors to trim extra seal
  • EPDM dense rubber construction won't shrink, crack, or fade over time
    • Resistant to UV damage
  • Dimensions: 30' long x 3/4" wide x 1/2" tall
    • 3/4" Tall with tab
  • Made in the USA


99-4236-283 Steele Rubber Products Large Hollow Half Round With Ears Peel-N-Stick Seal - 30' x 3/4" x 11/16"





Video of Rubber Large Half Round Seal for RV and Trailer Doors - Stick On - 30' Long x 1/2" Tall

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Steele Rubber Trailer Door Parts - Rubber Large Half Round Seal RV Trailer Doors - SR26ZR

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this rubber large half round seal for RV and trailer doors. With this rubber seal, you are going to be able to replace your old and worn out weather stripping around your doors and hatches of your RV before water damage creates a costly headache for you. As you've already seen, this is a peel and stick installation with the pre-applied 3M adhesive backing. And the skirting around the recessed adhesive is going to protect the connection from the elements.

You simply remove the backing and apply the seal to your frame. Surface preparation is recommended to remove any old adhesive. And then you would just use your scissors to trim the extra seal. This is made in the USA of EPDM dense rubber that won't shrink, crack or fade over time. It's very durable and it's going to be resistant to UV damage.

Now, this bundle that I have here is 30 feet long. And just to give you some other overall measurements, the overall width at the widest point, we're gonna be sitting right at about 3/4 of an inch. And then looking at the height when we're not including the tabs, we're sitting right at about half an inch tall. And then including those tabs, we're sitting right at about 3/4 of an inch tall. Well, that's gonna conclude our brief look today.

I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..

Customer Satisfaction Score:


Customer Reviews

Rubber Large Half Round Seal for RV and Trailer Doors - Stick On - 30' Long x 1/2" Tall - SR26ZR

Average Customer Rating:  5.0 out of 5 stars   (2 Customer Reviews)

Replace your old and worn out weather stripping around doors and hatches of your RV before water damage creates a costly headache. Adhesive backing is pre-applied for an easy DIY install.

by:

Nice and tight seal for the ramp and door. Adhesive was strong.



by:

Worked perfectly to complete a full seal around my RV Entry door. The previous seal, original to the door had a compression-set overtime....which means 'it wasn't snug on the entire periphery'.


2
2

See what our Experts say about this Steele Rubber Trailer Door Parts

  • Replacement Seal for Seal on 2001 SnoPro Clamshell Enclosed Trailer
    Thank you for the photo. We may have a few replacement seal options for your Seal on 2001 SnoPro Clamshell Enclosed Trailer but you'll need to confirm the dimensions we have will work for what you're needing. The Rubber Large Half Round Seal # SR26ZR measures 1/2" tall, the Rubber Bulb Seal # SR32FR measures 5/8" tall, and the Rubber Half Round Seal # SR85FR measures 11/16" tall. These all have slightly different designs as well so you'll want to make sure these match or are close to...
    view full answer...
    Image 1 for
  • Does Rubber Large Half Round Seal SR26ZR Have One or Two Lips
    The Steele seal part # SR26ZR does have two lips and is quite a bit different from the P-shaped wiper blade part # SR76FR which is white and had ridges instead of two lips.
    view full answer...
  • Determining The Correct Replacement Window Seals For A 2004 Lance 1121 Truck Bed Camper
    In order to find the correct replacement seal for the window in your camper we'll need to know the profile of the seal, the sizing, and how it currently attaches to the window. Most window seals will typically have a crescent moon shape and press into a track, kind of like part # SR43FR. If you can send me some pictures of the side profile of the seal and take a measurement of it like I have of # SR43FR below then I'd be happy to search for a replacement.
    view full answer...
    Image 1 for
  • Recommended Bulb Seal For An RV Ramp Door With A 1/4" Gap
    I went out to the warehouse and compressed both the # SR26ZR and the # SR76ZR and found that the # SR26ZR is approximately 3/8" thick when fully compressed and that the # SR76ZR compresses down to just a hair past 1/4". The base of the # SR26ZR is a lot thicker than it looks in the pictures so the # SR76ZR is going to be your best bet to properly seal the opening without being too thick to where you'd have to struggle to close the door.
    view full answer...

Do you have a question about this Trailer Door Part?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Amanda M
Edited by:
Amanda M
Employee Andy C
Installed by:
Andy C
Employee Cody B
Written by:
Cody B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924