Replace a worn-out wiper seal on your RV slide out with a durable and longer-lasting upgrade. Best for replacing wipers that do not have an integrated bulb seal. Wiper sticks in place with adhesive backing for an easy DIY install.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this RV slide out rubber wiper seal. This is gonna be a great option if you are needing to replace a seal on your RV slide out. And this will do a great job of helping to keep the water out of your RV, so you don't have to worry about mold and mildew and those sorts of things from water that are getting in there. And this is designed for use in RVs with separately installed bulb seals. So it is gonna be compatible with the rubber bulb seal that you see on the screen there.
And so if your original has a bulb seal similar to that one, this will do a great job. It's gonna flex in and out depending on the direction the slide out is moving. It is made here in the USA of a dense EPDM rubber. That is gonna hold up to your weather. It's not gonna shrink, crack, or fade over time, and it is gonna resist UV damage as well.
So it is gonna be very durable and long lasting. Definitely a higher quality than the original factory seal. So it is going to do a great job for you. It'll be a a good upgrade. Looking at our dimensions, this is right at four inches tall, about 4 1/16 of an inch tall, and you are going to get 30 feet of this here.
As you can see, it's all wound up on itself there. So that should be plenty to wrap around your slide out. You can use scissors to trim any extra seal once you're getting it installed. And it is a very simple installation. We've got the pre-installed 3M adhesive backing here, so we just peel off that backing and apply the seal to the RV frame surrounding your slide out.
It is suggested to do a little bit of surface preparation to remove any old adhesive and that sort of thing. But very simple to just peel back that backing, get it stuck in place and you're ready to go. So it is gonna be a great option if you are needing to replace original seal and it's gonna be a very simple upgrade for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
Replace a worn-out wiper seal on your RV slide out with a durable and longer-lasting upgrade. Best for replacing wipers that do not have an integrated bulb seal. Wiper sticks in place with adhesive backing for an easy DIY install.Fast shipping. I needed this size wiper seal for the top side of my slide out openings. Good quality adhesive and top quality overall.
This is a very hard to find size, and they had it. Haven't installed it yet, but the quality of the material looks very good.
I bought these wiper seals for my cedar creek fifth wheel. After installation I tried to slide my slides in and they tried to cock from one done to the other and did not come in smoothly or completely. These are made out of a different type of rubber that is very stiff so they don’t fold into the slide while moving slide in. I am out the price of a 30’ roll and cannot return because I used part of it. Beware of Steele wiper seals
Perfect fit! As usual, E-trailer had what I needed at a good price, very fast shipping!!! Reason why I buy all my trailer parts from them, makes it easy to keep my customers happy.
Hi, George: The rubber seal for my slide-out that you ordered for me worked-out just fine giving the slide-out a tight seal to keep rain out. Thanks, again, for such good customer service & even checking back after a year to see if I was satisfied.
Wiper seal was a good product but did not work on my slide. The seal was too thick and would not fold under when retracting my slide. I had to discard it and go another direction
I used the wiper seal for the horizontal seal (top) on my slide out that is 13 ft long on my cedar creek fifth wheel.
The rubber is so stiff it won’t flex and move properly when the slide is brought in. It is supposed to fold into the slide when the room is brought in for travel and prevents the slide from tiltin in at the top. Because I installed this seal I cannot get my money back. Not very happy.
You sent us 2 seals were wrong but it was our fault. Then we just got the correct seal today and postal delivery was 14 days. Your accepting the wrong parts and returns went well. Now with warm weather we can proceed with the fix. Thanks for your help.
it
Very good seal, has not deformed or tore over the last year. The seal also stays stuck in place.
Thank you so much for helping me get the right stuff
Easy to work with
The seal was easy to install and worked great.
Exellent produit et service
As expected
Worked great. Easy to install.
After one year, still good to go. etrailer is the Best!!!
Good wiper I liked the heavier bottom, I wish it would be tracked for a D bulb but I don’t see any 4+” wipers with D bulb tracks
I wasn't sure this product would work for me because it wasn't the exact size that I needed but knew I could trim it to the proper size. I got it to replace the weather seals on our travel trailer slide out. The new weather seals were much heavier duty than the originals. You must make sure the residue from the adhesive on original seals is completely removed and the area cleaned with alcohol. looks good and they work as intended. Very pleased with the results. These will last for the rest of the life of the trailer.
Great product. Will install tomorrow in the morning, in the Shade!! Quick shipping.
Easy install , like new again .
Purchased this item and SR79FR Bulb Seal for my 2011 Outdoors RV Wind River 2702BS. These items were a perfect match to the original and pretty easy to install. The bulb seal was a little more difficult than the wiper seal. Helpful hint clean out the rail that the bulb seal slides or pops into. I was surprised at the amount of dirt and build up inside the track. I used a little white grease in the track and it made popping the bulb seal in much easy. The wiper seal just clips over the metal flange. I used a rubber mallet and small block of wood to make sure the c-clip sealed on the flange. A great product from Steele Rubber Products and great service and price from Etrailer.
These were a great replacement for the rubber seals that were worn on our RV slide out. They were easy to install and fit great.
Do you have a question about this RV Slide Out Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.