bing tracking image
  1. RV Slide Out Parts
  2. Steele Rubber
  3. Bulb Seal
  4. Seals
  5. 3/16 Inch Wide
  6. 60 Feet Long
Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 60' x 1" Tall

Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 60' x 1" Tall

Item # SR89FR
Our Price: $281.99
RV Slide Out Parts
Shipping Weight: 11 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out. Great Prices for the best rv slide out parts from Steele Rubber. Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 60' x 1" Tall part number SR89FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (82)
  • Q & A (0)
  • Videos (1)
  • Photos

Steele Rubber RV Slide Out Parts - SR89FR

  • Bulb Seal
  • Seals
  • 3/16 Inch Wide
  • 60 Feet Long
  • Steele Rubber

Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.


Features:

  • Rubber seal replaces worn out weather stripping around slide outs
    • Typically found on the inside edge of the slide-out outer wall
    • Ideal for Thor Citation RVs
    • Commonly paired with bulbless wiper seals (SR29FR or SR96FR - sold separately)
  • Bulb design compresses evenly to prevent side-flop and for greater surface contact
  • Easy installation - slide into onto existing track and trim any extra seal
  • EPDM dense rubber construction won't shrink, crack, or fade over time
    • Resistant to UV damage
  • Dimensions: 60' long x 13/16" wide x 1" tall
  • Made in the USA


99-4375-265 Steele Rubber Products RV Slide Out Bulb Seal - 60' x 1"





Video of Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 60' x 1" Tall

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Steele Rubber RV Slide Out Parts - bulb seal 1inch 60ft - SR89FR

Hey everybody, Jarrod from etrailer.com. Today, I want to take a quick look at the Steele Rubber products, rubber bulb seal for your RV slide-out. This is a one-inch width by 60-foot length product. It is used to prevent water from leaking onto you and pests from gaining access to the slide out of your RV. The seal is typically found on the inside edge of your slide-out outer wall and it slides onto the track and seals against the camper wall, or slide-out wiper when the slide-out is retracted. This design helps prevent collapse when it's compressed and it allows for greater surface contact.

Now it works with these stick-on wiper seals. Any of these options will work fine, they are an extra layer of protection. If you take a look at the dimensions, we know that this is a 60-foot length and it is that one-inch width. Now the rubber seal is highly wear and weather-resistant, it is made in the USA, a standard of quality you know and trust. I think that'll about do it for the Steele Rubber products, Rubber bulb seal for your RV slide-out, one-inch width by 60 foot length.

I'm Jarrod with etrailer.com, you have a good one..

Customer Satisfaction Score:


Customer Reviews

Rubber Bulb Seal for RV Slide Out - 3/16" Track Mounted - 60' x 1" Tall - SR89FR

Average Customer Rating:  4.7 out of 5 stars   (82 Customer Reviews)

Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.

by:

The seal is good as the oem seal it will replace. I will replace the outer slide out seals on my RV. It solved the split seals after 14 years of service on my RV.



by:

I have bought multiple purchases from etrailer All the parts have met expectations. I am very pleased with the products supplied. At the end of the purchase they have multiple gender options. There are only 2 genders I will not buy another part due to I am no bowing down to this ideocracy. The end



by:

Exactly as described and was exactly what we needed! Thanks so much!



by:

The shipment came quickly, and worked just as I hoped it would I would order it again very pleased with the product



by:



by:



by:



by:



by:



by:

They look great when they ship to you but after 2 mths in the heat and cold, the slides stick to them like glue and pull them off the track channel. No amount of different lubes seem to help. WD40, nope, Axle grease (moly type), Nope, even a lard based oily lube would not stop them from sticking. The slide was cleaned with alcohol and thinners to get any debris off and them lubed as well and they still stuck. I spent more time trying to get them back in the track on a garbage can in the RV parks than they spent on the trailer driving down the highway. Would I get them again, probably cause that's all thats out there.



by:

So far, so good! Definitely much better than the original installed on the coach. It’s a bit tricky pushing it through the grooved track, especially if it’s a longer slide out. You have to push it then pull it from the other side. Some silicone sprayed in the track helps.



by:

Seal don’t react to slide because of the rubber is too stiff. Slide won’t come in properly. I am out the cost of a 30’ roll.
Beware of steels rubber wiper seals



by:

Overall, easy to install with the exception of the top piece, as I didn't want to undo the slide shade. Seal works well with no problems. Thanks!



by:

Just what i needed. Fits perfect.



by:

Your service was excellent and the how to video on your web site was extremely helpful



by:

Quality of material is still excellant after 1 year.



by:

Product was far superior the original seal. Should last longer with a better seal.



by:

bulb seals worked great. Easy to install. Shipping was fast.



by:

Purchased this item and SR47ZR Wiper Seal for my 2011 Outdoors RV Wind River 2702BS. These items were a perfect match to the original and pretty easy to install. The bulb seal was a little more difficult than the wiper seal. Helpful hint clean out the rail that the bulb seal slides or pops into. I was surprised at the amount of dirt and build up inside the track. I used a little white grease in the track and it made popping the bulb seal in much easy. The wiper seal just clips over the metal flange. I used a rubber mallet and small block of wood to make sure the c-clip sealed on the flange. A great product from Steele Rubber Products and great service and price from Etrailer.



by:

Very industrial if that is what you need. Match the wiper which is a plus. Harder then oem to slide together without good finger strength.



by:

I am very pleased with the help and the way my order were taken care of. When I placed the order I was helped to assure that I had all that I needed to take
care of my project on my RV. The product is great and very easy to work with it exceeded.my expectations. Would highly recommend this company and the people that you deal with when ordering product



by:

Used it in a 2019 Salem forest river slide out, this is the closest thing I could find, slips over the scraper channel but seems a little loose, I hope it works out..



by:

This worked great, should have bought first. Don’t waste your time with the D channel seals on [online vendor]. The lips that go into the channel are so thin and flimsy that the seal keeps popping out. This seal from Etrailer is much stiffer and works great. I installed it by myself but two people would have been nice - one to slowly push the seal on and make sure it stays on the channel and the other person to slowly pull it across the length of the slide. Regardless, it’s a pretty easy install and saves you several hundred dollars vs having the dealership do it.



by:

From ordering ,shipping and installation everything went really smooth. My son and I put. On new wiper and bulb seal with no problems. Seal seem to be of better quality than original seals. Will use etrailer again Thanks for a trouble free experience



by:

worked good on 2012 hartland trailer


25
77
Show More Reviews

See what our Experts say about this Steele Rubber RV Slide Out Parts

  • All Other Inquiries
    You can email me back with the picture of the seal and I can see if we have it. If you can also include dimensions too that will help make it easier to match what you may need. The inner and outer diameter.
    view full answer...
  • Determining The Correct Replacement Slide Out Bulb Seal For A 2010 Palomino Puma 30RKSS
    The seal you're pointing to in the picture is your bulb seal, which compresses when the slide out is retracted to form a good seal and prevent water or bugs from getting inside the trailer. The one you have looks fairly similar to the style on my fathers Jayco Eagle and presses into a track. You'll want to pull up in the seal to get it out of the track and get a good measurement of the seal's side profile so that we can find a get replacement. The Rubber Bulb Seal for RV Slide Out - 3/16"...
    view full answer...
  • Slide Out Seal/Wiper Replacements
    The Rubber Wiper Seal for RV Slide Out - Stick On - 60' Long x 4-1/16" Wide Item # SR66FR is made of EPDM (ethylene propylene diene monomer) dense rubber. It will fold in an out as your slide out moves and has some stiffness to it to wipe the slide out down as it extends and retracts. The # SR66FR is usually paired with a bulb seal like Rubber Bulb Seal for RV Slide Out - 60' x 1" Tall Item # SR89FR to prevent water from leaking into the slide-out on your RV.
    view full answer...

Do you have a question about this RV Slide Out Part?


Info for this part was:

Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H
Employee Jarred J
Installed by:
Jarred J
Employee Cody B
Updated by:
Cody B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.