Replace a worn-out wiper seal on your RV slide out with a durable and longer-lasting upgrade. Best for replacing wipers that do not have an integrated bulb seal. Wiper sticks in place with adhesive backing for an easy DIY install.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there I'm Michael with etrailer.com. Today, we're gonna take a quick look at this rubber wiper seal for your RV slide out. This rubber seal is going to help prevent water from leaking into your slide out on your RV. The wiper will flex in or out depending on how your slide in is moving. This is going to be compatible with your rubber bulb seal that you see on the screen there. So that that's going to make sure that you have a nice tight seal when you close your slide out to prevent any water from getting back in there.
This is a nice durable, rubber material. It's gonna be very ware and weather resistant. It's gonna help protect your RV from getting pests and or moisture in, that can potentially cause damage, mold that sort of thing. So very important to have on your slide out. As far as getting this installed it's gonna be a very simple peel and stick installation.
So you just peel off the backing here and then stick that into, onto your surface where you're wanting to get this installed. This is a nice, solid 3M adhesive backing so it's going to be very sturdy for you. Will hold up really well for you and make sure that your seal is going to stay there as your slide out moves in and out. As far as our measurements go, it says right at three inches in width, you're gonna get 60 feet of this seal. So it should be plenty to wrap around your whole slide out make sure that no matter what direction it's raining that's gonna keep the moisture out for you.
We do have other options available here at etrailer.com. So if this isn't quite the style that you're needing for your slide out, I would encourage you to take a look at some of those other options. But this is gonna work really well for making sure that that water stays out. It is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here the US. So if this will fit for your RV slide out I think it'll do a great job.
You'll be very happy with it, and especially helping to keep your RV free of mold mildew and decay. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watchin..
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
Replace a worn-out wiper seal on your RV slide out with a durable and longer-lasting upgrade. Best for replacing wipers that do not have an integrated bulb seal. Wiper sticks in place with adhesive backing for an easy DIY install.
I bought these wiper seals for my cedar creek fifth wheel. After installation I tried to slide my slides in and they tried to cock from one done to the other and did not come in smoothly or completely. These are made out of a different type of rubber that is very stiff so they don’t fold into the slide while moving slide in. I am out the price of a 30’ roll and cannot return because I used part of it. Beware of Steele wiper seals
Perfect fit! As usual, E-trailer had what I needed at a good price, very fast shipping!!! Reason why I buy all my trailer parts from them, makes it easy to keep my customers happy.
Hi, George: The rubber seal for my slide-out that you ordered for me worked-out just fine giving the slide-out a tight seal to keep rain out. Thanks, again, for such good customer service & even checking back after a year to see if I was satisfied.
Wiper seal was a good product but did not work on my slide. The seal was too thick and would not fold under when retracting my slide. I had to discard it and go another direction
I used the wiper seal for the horizontal seal (top) on my slide out that is 13 ft long on my cedar creek fifth wheel.
The rubber is so stiff it won’t flex and move properly when the slide is brought in. It is supposed to fold into the slide when the room is brought in for travel and prevents the slide from tiltin in at the top. Because I installed this seal I cannot get my money back. Not very happy.
You sent us 2 seals were wrong but it was our fault. Then we just got the correct seal today and postal delivery was 14 days. Your accepting the wrong parts and returns went well. Now with warm weather we can proceed with the fix. Thanks for your help.
it
Very good seal, has not deformed or tore over the last year. The seal also stays stuck in place.
Thank you so much for helping me get the right stuff
Easy to work with
The seal was easy to install and worked great.
Exellent produit et service
As expected
Worked great. Easy to install.
After one year, still good to go. etrailer is the Best!!!
Good wiper I liked the heavier bottom, I wish it would be tracked for a D bulb but I don’t see any 4+” wipers with D bulb tracks
I wasn't sure this product would work for me because it wasn't the exact size that I needed but knew I could trim it to the proper size. I got it to replace the weather seals on our travel trailer slide out. The new weather seals were much heavier duty than the originals. You must make sure the residue from the adhesive on original seals is completely removed and the area cleaned with alcohol. looks good and they work as intended. Very pleased with the results. These will last for the rest of the life of the trailer.
Great product. Will install tomorrow in the morning, in the Shade!! Quick shipping.
Easy install , like new again .
Purchased this item and SR79FR Bulb Seal for my 2011 Outdoors RV Wind River 2702BS. These items were a perfect match to the original and pretty easy to install. The bulb seal was a little more difficult than the wiper seal. Helpful hint clean out the rail that the bulb seal slides or pops into. I was surprised at the amount of dirt and build up inside the track. I used a little white grease in the track and it made popping the bulb seal in much easy. The wiper seal just clips over the metal flange. I used a rubber mallet and small block of wood to make sure the c-clip sealed on the flange. A great product from Steele Rubber Products and great service and price from Etrailer.
These were a great replacement for the rubber seals that were worn on our RV slide out. They were easy to install and fit great.
The rubber is of a good quality it hasn't started to shed black when you rub against it or leave black streaks on my unit, the only problem I have had in the stick on tape isn't of a long lasting material and starts to release after about 4 months so we removed the seal and used a automotive weather strip adhesive and so far it's been working well.
Same service as always.Great.The slide seals were easy to install and replaced the worn seals.Allison was also great help.
The website/catalog was extremely useful. The description and dimensions tool is superb! While trying to order this seal from other sites (my apologies to e-trailer for not coming here first) , I found the descriptions we’re useless and often contradicting. Even at [online vendor]! Reviews at other sites very often stated they received the wrong seal so that scared me off. Ordered from trailer, received it 2 days earlier than they projected and it’s the correct seal. I,ve found my spot for trailer and Rv parts!!
They do not hold themselves securely in place. Needed to add some self tapping screws. The manufacturer said adhesive was not required.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.