Malone Ultimate Angler MegaSport Trailer for 2 Heavy Kayaks - Bunks - Fishing Rod Tubes - 1,000 lbs

Malone Kayak Trailer - MPG550-AH

2-Tier trailer is great for hauling heavy kayaks, canoes, and other gear. Padded bunks protect your boat and hold it securely in place. Cargo box stores equipment and cargo for 3 - 4 people. Fishing rod holders hold up to 12 extra-long rods.

Features:

• Heavy-duty, 2-tier trailer lets you haul heavy kayaks, canoes, and other gear
• Durable 7' bunks stabilize your boats during transport
  • Soft padding protects your boats from scratches and scuffs
• Lightweight cargo box is great for storing camping equipment, luggage, or other smaller gear
• Fully molded fishing rod storage tubes hold up to 12 saltwater (extra-long) rods
• Manual crank jack with swiveling wheel folds up when not in use
• Lockable mounting bracket carries a full-size spare tire on the trailer's tongue - lock sold separately
• Submersible LED tail lights and side markers are DOT-approved
• Galvanized steel construction resists corrosion - great for fresh and saltwater environments
• Trigger-latch-style coupler attaches to your vehicle's 2" hitch ball
  • Included safety chains act as an emergency measure if coupler disconnects
• Leaf spring suspension absorbs road shock
• Assembly required - includes hardware, brackets, and wiring with 4-flat plug
• Licensing and registration paperwork included
• Made in the USA

Specs:

• Weight capacity: 1,000 lbs
  • Top crossbars: 150 lbs
  • Bottom crossbars: 500 lbs
• Maximum boat weight capacity: 225 lbs per boat
  • Maximum boat length: 20'
• Crossbar dimensions:
  • Top crossbars: 58" x 1-1/4" x 1-1/4"
  • Bottom crossbars: 86" x 1-1/4" x 1-1/4"
• Crossbar spread:
  • Bottom crossbars: 68"
• Trailer dimensions: 14' 6" long x 86" wide x 56" tall
  • Trailer tongue dimensions: 90" x 3" x 2"
• Storage bin weight capacity:
  • Dry storage: 200 lbs
  • Wet storage: 100 lbs
• Storage bin dimensions:
  • Dry storage: 48" long x 18" tall x 16" wide
  • Wet storage: 48" long x 20" wide x 10" tall
• Fishing rod storage tube capacity: 6 saltwater (extra-long) rods each
  • Storage tube dimensions: 6" diameter x 73" - 102" long
• Weight: 425 lbs
• Maximum speed rating: 65 mph
• 5-Year warranty

Coupler Specs:

• Ball size: 2"
• Pin hole diameter: 1/2"
• Height (from ground to bottom of coupler): 16"

Tire and Wheel Specs:

• Wheel dimensions: 10" diameter x 8" wide
• Wheel bolt pattern: 5 on 4-1/2"
• Tire size: 8" x 10"
  • Section width: 8"
  • Outer diameter (when inflated): 20.5"
• Tire capacity:
  • Load range: E
  • Ply rating: 2
• Speed Rating: 70 mph

Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.

Heavy-Duty, 2-Tier Trailer Hauls Kayaks or Canoes, Fishing Rods, and Cargo

This heavy-duty, 2-tier trailer with padded bunks, storage containers, and fishing rod holders lets you bring your favorite kayaks, canoes, and other gear on your outdoor adventure. With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.

Heavy-duty bunks stabilize your boat and prevent movement while traveling on uneven or rough terrain. They can be adjusted to accomdate different size hulls and eliminate boat-to-boat contact. The bunks' durable padding prevents scuffs, scratches, or damage to your boat during transport. To prevent mold or mildew, the bunks have weather-resistant covers to repel moisture and water.

This lightweight, top-tier load bar system provides second level storage and additional space for accessories like a bike rack, fishing rod storage tube, or a lighter boat. The rear load bar adjusts to accomodate different size cargo and prevent uneven loads.

To secure and protect your fishing rods during transport, these fully molded containers have a telescoping frame with padded ends. The tubes can be adjusted from 73" to 103" long to accomodate longer rods. To deter theft, each tube has a hinged door that is lockable with a padlock - lock sold separately.

This versatile storage container conveniently stows your important cargo and slides out from between the crossbars for easy access to your gear. It has a removable lid with water-tight gasket to ensure your gear stays dry. A metal hinge and hasp is used to secure the lid to the container and can be used with a padlock (sold separately) to deter theft.

This lightweight wire storage basket is great for holding all your wet or dirty gear after a day on the water. The open mesh design allows your gear to dry while being stored. With a black powder coated finish, this container is durable and weather-resistant.

Submersible LED Trailer Lights

The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.

Plug-and-Play Trailer Wiring

The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.

Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.

When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.

Leaf Spring Suspension

This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.

Quick and Easy Trailer Hookup

Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.

An easy-to-use manual crank jack allows you to raise or lower the coupler height for quick trailer adjustment. The jack comes with a swiveling wheel that rotates 360 degrees for full trailer control. A built-in handle twists and locks into place, folding the jack in a horizontal position against the tongue when not in use.

MPG535 Malone MegaSport Kayak Trailer for 2 Kayaks - Bunks - Fishing Rod Tubes - 1000 lbs