Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series

Question

Question:

does this hitch come in a bolt on unit

asked by: Doug

0

Expert Reply:

The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs.

expert reply by: Heather A

0

Answer 1

We have an option for you, though the hitch you mentioned will not fit your ambulance on a 1996 Ford F-350 cab and chassis. Instead, you need a universal weld-on hitch, and we have the exact one that will work: - Curt Class 5 Universal Weld-on Hitch…

view full answer...

Answer 2

We do have some trailer hitch options for your 2010 GMC Savana Van but since it has the Cutaway Chassis there are no custom fit options that bolt right up to the frame so we will be looking at universal fits. For a universal fit option that is at…

view full answer...

Answer 3

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 you were looking at measure 39" from center to center of the mounting holes as you can see in the included diagram, so depending where you measured…

view full answer...

Answer 4

I will be happy to provide you with the dimensions and hole spacing on the brackets included with trailer hitch #41990-07 to see if it will work on your cab and chassis 2004 Ford F-550. I have included a picture with the measurements.

view full answer...

Answer 5

As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier #UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the…

view full answer...

Answer 6

We do carry universal hitches that are rated for 10,000 pounds and above, like the Draw-Tite part #41990-07. I've linked the selection. With that being said a lot of times when a motorhome is rated for 5,000 pounds towing it isn't the hitch…

view full answer...

Answer 7

The best option we have for a 2008 Fleetwood Discovery Motorhome is the Multi-Fit Motor Home Trailer Hitch part #82201. In order to install this hitch you will need to drill into the frame but this is the only option since they don't have any…

view full answer...

Answer 8

The flange dimensions of the Buyers Products Class 4 Service Body Short Hitch Receiver part #3371801053 are 8-1/4" x 6-5/8".

view full answer...

Answer 9

The best option we have available for your International 4700 is the Buyers Products Class 4 Hitch Receiver #3371801055. This can be either bolted or welded to the bottom of the frame rails on your truck and it features a long receiver design to help…

view full answer...

Answer 10

For a trailer hitch with a 10,000 gross trailer weight towing capacity that will fit your 2007 Ford E-450, I recommend the Class V Universal Weld-on Receiver Hitch part #15903. This hitch as the title states is a universal option that will fit frame…

view full answer...

Answer 11

There are a few options for your 2000 International 4900 Truck, but there is not a custom fit receiver available. The Super Titan 4000 Weld-On Trailer Hitch with 3" Receiver Opening, 25,000 lbs. #38124 could work but requires the frame on your…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series

Products Referenced in This Question

Continue Researching