Brophy Clevis Pin for 2" Clevis Mount - Zinc Plated - 6-1/8" Long x 1" Diameter
(7 reviews)
Price: $12.56
In Stock
Brophy Clevis Pin for 2" Clevis Mount - Zinc Plated - 6-1/8" Long x 1" Diameter
Item # CP20
Our Price: $12.56
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (2)
- Photos
Brophy Hitch Pins and Clips - CP20
- Clevis Pin
- 1 Inch Diameter
- 4-1/8 Inch Long
- 4-1/8 Inch Span
- Brophy
This 1" diameter pin lets you secure your equipment to your clevis mount for 2" hitches. Zinc finish resists corrosion.
Features:
- 1" Diameter pin lets you hook up equipment to your hitch-mounted clevis (sold separately)
- Zinc finish resists corrosion
- Made in the USA
Specs:
- Application: clevis mounts for 2" hitches
- Overall length: 6-1/8"
- Usable length: 4-1/8"
- 1-Year warranty
CP20 Brophy Clevis Pin for Two Inch Clevis Mount - Zinc
Video of Brophy Clevis Pin for 2" Clevis Mount - Zinc Plated - 6-1/8" Long x 1" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Clevis Pin Review
Jake: Hey guys, it's Jake here with etrailer. Today we're going to be taking a look at the Brophy Clevis Pin. This is going to be either a replacement pin or a new pin for a trailer you might've misplaced your clevis pin for. It's going to work with many different clevis tongues and your clevis adapters for whatever vehicle or tractor that you're pulling your clevis tongue with. It's going to fit into one inch or larger clevis pin holes and it's going to come with a clip to secure it on the other side.Now, what I like about this pin is that they went the extra mile and put a stop plate on the top so that when you place it in, it's going to stop it from flowing in any further. It's also going to have this nice ring on the top.
So if your trailer's ever in a bind, which often happens with the style trailers, you're going to be able to pull out on this ring with a greater force than what you would if you just had a flat plate.The length of the pin is going to be four and an eighth inches. And the total length of the pin with the ring on the top is going to be six and an eighth inches long. The pin is going to have a nice thick steel construction to it and a zinc plated finish to help resist against rust and corrosion when it's outside with frequent use. Well guys with all that being said, that's going to do it for a look at the Brophy Clevis Pin..
Customer Reviews
Brophy Clevis Pin for 2" Clevis Mount - Zinc Plated - 6-1/8" Long x 1" Diameter - CP20
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
This 1" diameter pin lets you secure your equipment to your clevis mount for 2" hitches. Zinc finish resists corrosion.by: Terry 02/22/2021
I've been using this for about a year to lock the rotation of the scraper blade that I use on my tractor's 3 point hitch. It is doing the job nicely and has stood up to many beatings.
by: James T05/04/2019
Got this to go with the MaxxTow 2-Tang Clevis for 2" Trailer Hitches. Does what it is suppose to do.
by: Sean06/11/2019
Products as described, arrived missing part of the order, phoned customer service and they were spot on getting it to me in 2 day shipping! Highly recommend etrailer! Thank you for your professionalism and your due diligence to your customers!
by: Mark 06/27/2020
Great product ship very fast I am pleased would recommend this product and this company
by: Mike V03/13/2019
Good quality!
by: Billy08/08/2018
Fit Perfect
by: Jeff 11/15/2022
7
7
See what our Experts say about this Brophy Hitch Pins and Clips
- What Grade Steel is Used to Make Brophy Clevis Pin for 2" Clevis Mount # CP20Brophy Clevis Pin for 2" Clevis Mount # CP20 doesn't have a grade like 5 or 8 like a bolt would. It is rated differently. I asked my contact at Brophy and he said it is "1" Cold Rolled Round bar 1018 material." According to some metal-working resources "1018 cold rolled steel is a low carbon steel with good case hardening qualities. It has higher manganese content than other low carbon grades, such as 1020."
view full answer... - Clevis Hitch and Pin to Tow an Agricultural TrailerIt sounds like you're looking for a clevis hitch, like the MaxxTow # MT70034. Then use a 1 inch diameter clevis pin, part # CP20, to hook up your trailer.
view full answer... - Can the MaxxTow # MT70034 Clevis be Used to a Tow Trailer with a Lunette RingAs long as your trailer equipped with a lunette ring is within the 5,000 lb weight limit of the MaxxTow # MT70034 and your lunette ring fits within the tangs of the clevis hitch (see attached photos) you can definitely use this with a lunette ring. Please note that your lunette ring can't be more then 2-1/2" thick. You will also need a hitch pin & clip like part # PC3 or a locking hitch pin like part # e98880, as well as the clevis pin itself like part # CP20.
view full answer... - What is the Diameter of the Washer on the Pull Pin End of the Clevis Pin?The diameter of the washer on the pull-ring end of the Brophy # CP20 Clevis Pin is 2 inches.
view full answer...
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
Expert Research:
Michael H
Video Edited:
Jacob T
Written by:
Laura H
Updated by:
Rachelle B
Updated by:
Wilson B
Installed by:
Cole B
Installed by:
Jacob H
Video by:
Shane H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Terry
2/23/2022
Still working great after 2 years of abuse.