2-1/2" x 7/8" Rectangle. Mini amber strobe light has 3 diodes and 12 flash patterns to alert others to the presence of your vehicle. Durable aluminum housing. Surface mounts with included 3M tape or bracket. 3-Wire design.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the 2.5 inch LED amber multi-mount mini strobe light with three LEDs. This amber LED strobe light has three LEDs and a 12 flash patterns. It includes synchronous and alternating function. Commonly used on utility vehicles, pick up trucks, and construction vehicles.It's going to feature a versatile, multi-mount option. We have three different ways that we can mount our light, and I have the adhesive sticky pads that we can mount directly to the base. We can take the provided hardware and screw the base to a surface, or we can take the mounting bracket and mount it that way.
Again, all the hardware is included, so we can mount it however we'd like.The housing on our light is going to be made of a cast aluminum for durability and the LEDs inside are going to make a great replacement for incandescent bulbs. They're going to last up to 50 times longer and be more efficient, because they're going to provide us a brighter light with less power output. And, we don't have to worry about replacing any bulbs or any brittle filament inside the brick.The housing, itself, is going to be black. We have a clear lens for the amber LEDs. Now, as far as the wiring goes, we're going to have a three wire system.
Our red wire is going to be our power wire. Our black wire is going to be our ground, and then finally, our yellow wire is going to server functions. It's going to be for sticking up multiple lights and to pick which flash pattern we want. Now, the light itself is IP67 for water and dust resistant. It is SAE-J595 Class 2 rating for brightness.So, I'm going to go ahead and hook up my light so you can take a look at the brightness and the different flash patterns.
So, I'll hook up my power and ground. I can turn on my power source, and you can see just how bright it is. Now, one thing I want to mention again, that the yellow wire, if we touch our yellow wire to our power source, you'll see that it's going to switch the flash pattern. So, each time we do it, it's going to change that pattern.So, I'm going to go ahead and turn off the overhead lights so we can see how bright our light really is. You see those three LEDs are going to provide a lot of light output and give us that nice amber color.
I'll go ahead and turn the overhead lights back on, turn off our power source, and unhook my wires.I would like to give you a few dimensions on the light itself. As far as width goes, the light is going to be right at 2.5 inches long. As far as depth goes, if we include the base on the light here, my light's going to be right about an inch and a half deep. Now, as far as how tall the light is, my light's going to be right at 7/8th of an inch tall. Now, they are going to provide us with 37 inches of wire so we can hook our lights up. Again, there is going to be three diodes on the inside. This is going to work with 12 and 24 volt systems and the 12 volt is only going to be pulling 0.22 amps.That will finish up at the 2.5 inch LED amber multi-mount mini strobe light with three LEDs.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.