T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(148 reviews)
Price: $66.63
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118482
Retail:$93.34
Our Price: $66.63
You Save: 29%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (148)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118482
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in rear cargo area
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118482 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2012 Toyota Avalon
- 2011 - 2012 Toyota Avalon
- 2010 - 2011 Toyota Camry excluding Hybrid
- 2007 - 2011 Toyota Camry Hybrid
- 2007 - 2011 Toyota Camry Hybrid
- 2010 - 2011 Toyota Camry non-Hybrid - excluding SE
- 2010 - 2011 Toyota Camry SE excluding Hybrid
- 2014 - 2016 Mitsubishi Outlander
- 2017 - 2020 Mitsubishi Outlander excluding PHEV models
- 2014 - 2016 Mitsubishi Outlander without factory tow package
- 2017 - 2020 Mitsubishi Outlander without factory tow package - excluding PHEV
- 2009 - 2017 Toyota Venza
- 2009 - 2017 Toyota Venza
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118482
Average Customer Rating: 4.7 out of 5 stars (148 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Martin06/18/2023
I received hitch and wiring harness about a week ago went out this morning and installed both. Took about an hour and a half to do both. The hitch went on without having to drop the muffler and the wiring harness is pretty well plug and play you just have to run powerfrom the battery to the rear. This is the second vehicle I have done using etrailer can't say enough good about these guys the delivery was timely and instructions clear, videos on the site are always helpful as they are vehicle specific. Thanks etrailer
by: Shawn 04/17/2024
2010 Toyota Venza
Having this wiring harness available made the install "almost" enjoyable. All went well, and I could not be happier with the results.
by: Rob P07/01/2020
So about a year ago I bought a reciever hitch, receiver cover,euro style ball and wiring for my 2010 Camry to tow a 4x8 foldable trailer for powersports......Installation was straight forward and dedicated an afternoon for install.....Directions for the products was easy to follow for both products.... so far the wiring is just as I installed it and the hitch is holding up great, you can barely notice that I have a hitch back there. I think it blends in nicely....I anticipate many years of worry free towing....
Customer service is top notch also ????
by: Tom K.11/04/2023
2015 Toyota Venza
This is my third hitch and harness from etrailer. videos are useful. Customer service is excellent. The etrailer brand hitch for my 2015 Toyota Venza is virtually invisible!
by: James 11/27/2023
When help was needed, Korren was very helpful. She put the order in on Friday and I received the wiring harness today, Monday.
by: Michael 07/11/2023
The wiring harness was easy to install with the included directions and the video. Have used it several times and it is still working fine. I would recommend the wiring harness to anyone looking for a good quality product.
by: William 04/24/2024
2011 Toyota Camry
Full compatibility with my 2011 Camry. Installed without any problems.
by: Liquidwrench09/07/2022
Plug and play! Worked perfectly
Liquidwrench
9/8/2023
flawlessly with no concerns
Mike L.
11/1/2023
@Liquidwrench We're glad to hear your # 118482 Tekonsha trailer wiring harness is still working well for you!
by: Cale08/08/2023
Very easy to install and worked right the first time. Instructions and video are clear and helpful. I don't see how it could be and better or easier.
by: Dan 03/08/2023
2012 Toyota Venza
Everything fits as it should, youtube video's from e-trailer gave step by step instructions for my car!
by: Amy H06/12/2017
2012 Toyota Venza
It took us a while to install because we have little background on pulling trim panels off and knowing where to find things. But, we watched the YouTube video and with the instructions we were able to install the wire harness with little to no problem.
Amy H.
6/12/2018
Everything is working fine! Thank you!
by: Chris S05/30/2020
The item worked OK only once, the first time. I have done some testing. There is continuity from battery to unit. There is continuity from unit's ground to trailer plugin. The lights on the car work fine with the unit's wiring: it gets feed from car controls. The unit is fully sealed so I cannot test continuity from unit to plugin, other than mentioned ground connection. Visually the wires from unit to trailer plugin are fine. I highly suspect the unit itself and not the wiring. I have tried the suggestions online to unplug power to it for some time to no avail. Needless to say, poor rating.
by: Jim M01/01/2017
This is my 2nd trailer hitch from e-Trailer. I have a small trailer I use to haul brush, furniture & my recumbent bike. I was very pleased with my first hitch, but after getting a new car, I needed another hitch. The quality products and video instructions make it straight forward to install. My kit required a wire to run from the back of the vehicle to the battery in front. The video outlined the best path to route the wire to avoid hot parts or areas where the wire could be damaged. The connection at the battery included a fuse to prevent a electrical fire if somehow the wire got damaged, like in an accident. When I ordered the 2nd hitch, I received an email letting me know the hitch I selected was no longer available within 3 hours of my order. They suggested another hitch to fit my vehicle. Whenever the need for another hitch arises I know the only place I will go, etrailer.
by: Rich01/25/2019
1998 Toyota Camry
This worked great. The only thing that was a little bit of a pain was to run the power wire to the battery. I ran it out under the car attached to brake and feul.line area from trunk to battery. It does work good i have a 98 Camry also that didn't need the power wire but at time I have issue with the 98 blowing tail light fuses. This one works great on the same trailer it is a 2 place snow mobile trailer. This one has side lights also
by: Ray G.06/06/2016
2011 Toyota Camry
Fit my 2011 Toyota Camry perfectly. I wish that the ground cable would have been slightly longer to reach the factory ground. That being said, there is plenty of space to attach the ground with the supplied self tapping screw. Installation was simple, the only time consuming part is running the main power under the car to the battery (not an issue for hybrid models where battery is in the trunk). Everything tucked away nicely.
Ray G.
6/6/2017
A year later this harness is working flawlessly. Being able to store the harness end in the trunk out of the weather has been nice, it looks as new as the day I bought it. I tow with it once a week at least.
by: Don R.07/20/2013
2007 Toyota Camry
This kit made the wiring easy. No question about what went where or how to get it there. I can't wait to get a trailer for my canoe to hook it up. Thanks.
Don R.
1/18/2015
The wiring has worked flawlessly. You have great products.
Rachael H.
1/19/2015
Thanks for the follow up and reply.
by: G-lenn12/17/2012
Toyota Venza
Works well but not particularly easy to install and directions were of little use. I tried to find a place to fish the power lead through the firewall for an hour but gave up and drilled a hole below and to the left of the steering column. Also, the directions for the Venza say to remove the cargo attachments and plastic in the back. It isn't necessary and doesn't actually help... just remove the black trays and the small access panels for the tail lights. You can reach down and disconnect the wiring harness but it helps to pull the harness away from the tab that secures it to the chassis.
by: David D. 04/10/2015
Toyota Camry
I purchased a light kit for my Camry and loved it, worked great without putting a load on the car wiring. So when I needed lights for my Venza I went back to etrailer and it was promptly sent to me. This one however had an issue. When I notified etrailer they helped me trouble shoot and when the box was the problem, promptly replaced it. Very happy with the with the service.
by: DON04/02/2017
I couldn't give it 5 stars because I haven't put the wiring harness on yet, but it sure got here fast...like two days. I certainly appreciate that.
Don M.
4/2/2018
Working great. Easy to install, no problems whatsoever.
by: Steve B.05/10/2019
Mitsubishi Outlander
The wiring kit is complete and installation is foolproof. Once installed it works exactly as it should. If you are installing it in an Outlander PHEV, here are some observations you might find useful:
The battery is in the rear of the vehicle and obstructs your exposure to the driver's side wiring. You might want to consider removing the battery entirely so the trim panel can deflected a bit more.
The tail light wires have very little slack and the connectors are a bit difficult to pull apart. I found it helpful to remove the lens assemblies from each side and access the wires that way. Simply remove the two screws and firmly pull the entire lens straight back until it releases from the plastic "C" connector.
by: Thom K.06/13/2013
Wiring harness fit the vehicle very well. My only suggestion is that a bracket should be shipped with either the wiring harness or the trailer hitch for the external mount of the four-wire connector. The wiring instructions suggest that the four-wire connector be stored in the trunk and extended out of the hatch when using with a trailer. The harness is made to go through the knockout on the driver's side and connect via a bracket on the trailer hitch. The installer just needs to squeeze the four-wire connector to push it through the rubber knockout opening, and then slit the rubber knockout to fit the flat wire of the four-wire connector.
by: Steven04/13/2019
Good product, installation instructions and videos on YouTube made the install easy.
Steven
4/14/2020
Made some modifications during install, tapped power from a never used cigarette lighter style port and ran harness external through a hole I found in the pan under the spare tire, double wrapped with corrugated tubing and spiral wrap to make a clean and protected hookup point, sealed the exit hole with silicone RTV to prevent water entry, been working great for the past year.
by: Quinten07/24/2019
2017 Mitsubishi Outlander
The product itself seems durable and well crafted. The install is mostly straight forward and easy to do however the instructions are not very great. The videos on the website were not helpful for me as they were not my make and model. The greatest difficulty of the install was the running of the wire to the battery and re installing the trim. In my Mitsubishi Outlander I was not able to find a way to run the wire along the outside nor did I want. I ended up running it along the harness but once I got to the dash I could not find a way to get to the engine bay without having to remove the whole dash which I wasn't going to do. After investigating for an hour to find a hidden pathway I just ran the wire out the door and through the quarter panel. Took me about 4 hours to install.
by: Excellent product 07/26/2019
This was truly a great investment!
Easy to install.
I watched the video that etrailer has on their site and about an hour later I was done with the installation and about another 20 minutes securing the wire to the battery for a (2015 Toyota Venza).
Looks great on the vehicle. No altering the rear bumper at all.
Thank you etrailer for making this a very simple task.
by: Paul10/25/2011
2011 Toyota Camry
I had an excellent experience with your company. The product came on time, was complete, and the online tutorial was compelety accurate and helpful!
25
148
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Brake Controller for a 2014 Mitsubishi OutlanderThe Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is an excellent option for a 2014 Mitsubishi Outlander and what I recommend. In regards to installation, you'll need to start with a 4-way and then adapt this to a 7-way using the T-One Vehicle Wiring Harness part # 118482 and Brake Controller Install Kit part # ETBC7.
view full answer... - What Wires To Splice on 2015 Mitsubishi Outlander Sport If No Connector For 4-Way # 118482? First be sure the connector for the T-One Vehicle Wiring Harness # 118482 was not pushed outside the rear compartment on your 2015 Mitsubishi Outlander sport. This may require removal of the tail light to feed the connector back through the access hole. If the connector was removed you will need a Test Light # PTW2993 to verify the function of the tail light wiring to splice into the wiring. You may be able to find out the correct wiring colors from your local dealer but they will need...
view full answer... - Remove Plastic Cover on Bottom of Spare Tire Well, 2011 Toyota Camry SE, to Install Trailer HitchThe plastic cover you are talking about is covered in step 3 of the instructions I have attached for you. It reads If present, remove the plastic under covering located under the trunk pan. You will not re-install the covering. The plastic cover does not serve a functional purpose and we have not even come across a Camry yet that had it. Removing it will not be an issue. If you plan on doing some towing, the hitch comes with the correct ball mount, pin and clip. For a ball you can use...
view full answer... - Trailer Hitch and Wiring for a 2008 Toyota CamryFor your 2008 Toyota Camry I recommend Draw-Tite trailer hitch # 36416. We have it at an excellent price right now. Next you will need a ball mount, # 36071. It comes with a pin and clip. For a ball it will depend on what size the coupler on the trailer requires. For a 1-7/8 inch ball use # 19256. And for a 2 inch ball use # 19258. The ball size the coupler needs should be listed on the top or side of the coupler. And last, you will need wiring. If your Camry is a hybrid model use # 118482....
view full answer... - Trailer Wiring Recommendation to Use with Draw Tite Hitch for 2013 Toyota VenzaFor trailer wiring for your 2013 Toyota Venza you will need to start with a 4-way to provide the turn signal functions. For that you would need the part # 118482. Since you don't have trailer brakes you would then want the part # 37185 to convert the 4-way to a 7-way. To activate the 12 volt accessory circuit you will want to run a length of 10 gauge wire part # 10-1-1 through a circuit breaker like part # 9510 to the positive post of your battery. The wire to use on the # 37185 is the...
view full answer... - Troubleshooting Wiring Harness # 118482 on a 2011 Toyota Venza that Blows FusesThe brown wire should not always have current on it. That is the running light circuit and is only supposed to be active when the running lights or head lights are on of your vehicle. It is possible that the converter box is malfunctioning, what you could do is use your circuit tester to test the input side of the converter box to make sure that it is receiving the correct signals and then test the output circuits to see how everything is working. This will tell you if the problem is in...
view full answer... - Installation Process for T-One Harness with ModuLite part # 118482The ModuLite box on T-One Harness part # 118482, requires one wire to be ran up to the battery for power. There are no easy-to-access or substantial power sources at the back of most vehicles, so one power wire will have to be run up to the battery. Other than that, the harness is extremely simple to install. The brake, running light, turn and hazard signals are all picked up for snapping connectors in place between the tail lights and the vehicle. The ground wire, white wire with eye...
view full answer... - Lighting Solution for 2008 Camry Whose Tail Lights Are Blocked by Hitch Bike Rack and BikesYou are wise to consider this safety concern of your tail lights being blocked by your loaded hitch bike carrier. And we can give you an easy solution. A set of magnetic towing lights, such as the cost-effective Optronics # TL21RK, is an ideal solution since these are easy to install and store, and because they can be positioned on any metal surface that gives other motorists a good visual signal that you are braking. Their magnetic base holds them in place. Other options can be seen on...
view full answer... - Hitch Recommendation and Trailer Wiring For 2018 Mitsubishi Outlander PHEVI do have an option for you but the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118482 is not a fit for the hybrid versions of the Outlander. I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT which is the only option available for the Hybrid Outlander that does not require splicing into the wiring. The ZCI connections clamp onto your OEM tail light wiring during installation....
view full answer... - Recommended Hitch for Carrying Bikes with 2011 Toyota Camry SEWe offer a Hidden Hitch or a Draw-Tite Class II hitch for your 2011 Camry SE. If you are planning on possibly doing some light duty towing in the future, the Hidden Hitch # 90152 (no longer available) would be a good choice, as it includes the ball mount and the pin and clip. You'll also need a wiring harness # 118482 and the appropriately-sized trailer ball like # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch. If all you're wanting to use the hitch for is an attachment point for...
view full answer... - Recommended Trailer Hitch Receiver For 2017 Mitsubishi Outlander ESFor your 2017 Mitsubishi Outlander ES I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C13163 as it is confirmed to fit your vehicle, and its 600lb tongue weight rating and 4000lb trailer weight rating makes it a great option for a bike rack, cargo carrier, or ball mount to tow a trailer. If you are planning on towing with your Outlander, you will need a vehicle wiring harness # C13163 and a ball mount, hitch ball, and hitch pin and clip which can all be...
view full answer... - Concealed Trailer Hitch Receiver and Wiring Harness for a 2010 Toyota CamryIt is possible for the Draw-Tite Trailer Hitch Receiver # 36416 on your 2010 Toyota Camry to have some flex in the trunk floor pan under the spare tire. This is due to the floor pan being thin sheet metal. To remedy this you could replace the small spacers that are used with some larger plates of steel that will disperse the weight over a larger area and make it harder for the floor pan to flex. I do recommend installing the T-One Vehicle Wiring Harness # 118482 when installing the receiver....
view full answer... - Trailer Hitch and Wiring Recommendation for 2020 Mitsubishi OutlanderFor your 2020 Mitsubishi Outlander I recommend the Curt hitch part # C13163 as it has plenty of towing capacity and installs relatively easy. I attached an install video for you to check out as well. For trailer wiring the easiest to install and most reliable option is the Tekonsha part # 118482. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
view full answer... - Does Trailer Wiring Harness for 2016 Mitsubishi Outlander Tap into Hatch Opening MechanismThe Tekonsha trailer wiring harness part # 118482 that you referenced which is a confirmed fit for your 2016 Mitsubishi Outlander doesn't tie into the rear hatch opening wiring actually. It plugs into the taillight connectors of your vehicle so yours not having the electric hatch opener would not be an issue.
view full answer... - Recommended Trailer Hitch Receiver and Wiring Harness For a 2008 Toyota Camry HybridI recommend the Curt Trailer Hitch Receiver # C12343 for your 2008 Toyota Camry hybrid. This receiver is going to be the easiest to install as it is custom fit and does not require any drilling to mount the receiver. The T-One Vehicle Wiring Harness # 118482 will allow you to control the lights on small trailers you may tow. And these can also be used with Auxiliary Lights # C53201 if you have a hitch mounted accessory that impairs the view of your tail lights on your Camry. The Mounting...
view full answer... - 2 Class III Trailer Hitch Receiver and Wiring Recommendation For a 2015 Toyota Venza AWDThe etrailer Trailer Hitch Receiver # e22AR and Curt Trailer Hitch Receiver # 13356 are our only class III receivers that are confirmed to fit your 2015 Toyota Venza AWD. Both receivers include spacer blocks to relocate the rear sway bar since you have an AWD version. I recommend installing the Tekonsha T-One Vehicle Wiring Harness # 118482 when you install the receiver. This 4-way connector will allow for you to connect to most small trailers as well as use Auxiliary Lights # C53201....
view full answer... - Recommended Trailer Hitch for Towing with a 2020 Mitsubishi OutlanderFor towing a trailer with your 2020 Mitsubishi Outlander I recommend using the Curt # C13163 which is a confirmed fit for your 2020 Outlander. This gives you a really clean look when everything is installed. I have attached an installation video and some photos of this trailer hitch on a 2019 Outlander that you can check out. You also need a wiring kit to provide power to your trailer lights. I recommend the T-One # 118482 because it is the most reliable option we carry. This kit tees...
view full answer...
- Troubleshooting Wiring Issues After Installation Of T-One 4-Way Wiring On a 2009 Toyota VenzaFirst you will want to perform a visual inspection of the area you ran the power wire for the T-One Vehicle Wiring Harness # 118482 on your 2009 Toyota Venza. The pop noise you heard concerns me and makes me think there was a short in the wiring to a ground point. If you see any visible spots on the harness worn down you will want to repair those right away. If you do not feel comfortable with electrical and wiring you can take your Venza to a service shop in your area to have them inspect...
view full answer... - Is There a Mounting Spot for the Wiring Harness on a Curt Trailer Hitch Receiver # 13356There is a way to store the wiring harness plug for your 2014 Toyota Venza but there is no actual mounting spot on the Curt Trailer Hitch Receiver # 13356. The way demonstrated in the installation video I have attached for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118482, is to store the wiring under the floor covering inside the hatch. You can then pull out the wiring to connect to your trailer, being sure to stay away from the latch in the center. Using this...
view full answer... - Does Exhaust have to be Lowered to Install Curt Trailer Hitch on a 2012 Toyota Venza All-Wheel DriveAccording to the instructions for Curt hitch # 13356, linked for reference, lowering of the exhaust is required on all models. And on AWD models you also have to disconnect the sway bar brackets like you said. It might be possible to angle the hitch in without lowering the exhaust but it would be difficult. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or...
view full answer... - Hitch and Wiring Recommendation for 2015 Mitsubishi OutlanderThe shipping weight of the Curt hitch is 43 pounds. The actual hitch will weigh a few pounds less. For wiring I recommend the # 118482 because, over time this harness has proven to be more durable and reliable than the others offered.
view full answer... - Trailer Hitch, Wiring, and towing Accessories for a 2011 Toyota VenzaWhat the dealer most likely meant is that the Toyota Venza does not come with a factory tow package and thus there are no official tow package parts made for it that are OEM. You can still install a trailer hitch and wiring in your 2011 Venza. The Draw-Tite Hitch, # 36512, that you referenced is a good choice. Even though the hitch has a gross trailer weight capacity of 3,500 pounds, you must still go by the owners manual for the towing capacity of the vehicle and go by it. If that is...
view full answer... - Trailer Hitch and Accessories for a 2007 Toyota Camry Hybrid and Who Could Install the HitchThe Draw-Tite trailer hitch, # 36416, will fit a 2007 Toyota Camry Hybrid. A Toyota dealership might install it but I recommend going to a trusted mechanic or an RV dealer or shop that works on trailers to have it installed if you do not want to tackle the project yourself. I have included a link to the installation details and a link to a video showing a typical installation for you. If you plan on doing some towing the correct ball mount is # 36071 and you can use pin and clip # PC2....
view full answer... - Trailer Hitch Recommendation for a 2011 Toyota Camry SE with Dual ExhaustThe Draw Tite Hitch part # 36416 is confirmed to fit your 2010 Toyota Camry SE that has dual exhaust. I confirmed this with Draw Tite. We also had a customer with basically your exact Camry email us and tell us that this hitch worked well on his vehicle. I attached an install video for you to check out as well. For trailer wiring you would want the # 118482, ball mount part # 36071, 1-7/8 inch ball # 19256, 2 inch ball # 19258.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane H
Test Fit:
David F
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Video by:
Kathleen M
Video by:
Michael B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rob P.
7/3/2021
With the exception of the hitch cover cracking and dry rotting where it pivots, everything else is great.If I had to do it over again I wouldnt change a thing.....Im extremely pleased with the products I purchased from etrailer.com