4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $29.15
Confirmed to Fit
2012 Ram 3500
without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (209)
- Q & A (0)
- Photos
2012 Ram 3500 - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- No Converter
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Ram 3500 Wiring Harness with Ram 3500 End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
- Wrong item was ordered
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: Frank07/08/2020
I purchased the Draw-Tite Receiver and wiring kit. All parts were easily identified. Good printed instructions. Everything assembled easily and fit perfectly. It took about 1.5 hrs to complete. It will be used to tow a small utility trailer. Highly recommend this equipment and etrailer.com. Thanks.
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: Jason05/18/2020
Ordered a few weld on trailer hitch receiver tubes among other trailer parts. Parts were delivered in a timely manner and the quality of the receiver tubes is excellent. I will buy from this group in the future when I need trailer parts.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: Arnie09/21/2017
4-pole Hardwire Kit with circuit tester.
I needed the kit to attach rear (break/lights/back-up/tail lights) assembly.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Installing a 7-Way Trailer Connector and Brake Controller on 2007 Hummer H3Typically, the brake signal wire and 12V power wire should be in the same bundle of wires where you found the turn signal wires, ground, and running light wires. They may not be blue and black in color, but you can use a circuit tester, # PTW2993, to test for the functions of the wires. You can also use the circuit tester to test the functions of the bundle of wires you found under the dash for the brake controller. Another place the 12V power and brake signal wires may be located is along...
view full answer... - Recommended 7 Way Wiring Harness for 2004 GMC Savana Cutaway Since you don't already have the factory wiring for a towing package on your 2004 GMC Savana Cutaway 3500, you'll first need to add a 4 way connector; to do this I recommend using the Tekonsha 4-pole Hardwire Kit with Circuit Tester # 18252 which will need to be hardwired into your vehicle electrical system. From there, to add the appropriate wiring for a brake controller, you need to add the Universal Installation Kit for Trailer Brake Controller # ETBC7 , which will put a 7 way connector...
view full answer... - Trailer Hitch and Wiring for 1970 Ford F-250The B and W Trailer hitch part # BWHDRH25122 that you referenced is the correct hitch for your 1970 Ford F-250 with a standard bumper and comes with everything needed to install. For trailer wiring you are going to need to start with a 4-way like part # 18252. If this is the style of connector you need you'd be done at this point. If you need a 7-way you'll need to go further than this. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to...
view full answer... - Recommended Hitch for a 1966 Chevy C/10 w/ Standard Bumper To add a hitch to your 1966 Chevy C/10 you will want the Curt Trailer Hitch item # 13028. This hitch fits both the 6' and 8' beds with a standard bumper. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity that can be increased to 10,000 lbs when used with a weight distribution system. I have linked the installation instructions below. If you are planning on towing you will also need a wiring harness item # and a ball mount kit item # C45534.
view full answer... - What Size Spare Tire Will Fit With Curt Hitch on 2011 Ford F-250 Super DutyI contacted our representative at Curt and he informed me that the Curt Trailer Hitch Receiver, part # 14041, will not fit vehicles with a 20 inch wheel spare. So if the vehicle has a 20 inch tire, for example 245/55/20, it will not fit that vehicle. The 20 inches is referring to the diameter of the wheel, since the wheel is 20 inches in diameter and will require a tire with a larger diameter than tires for smaller wheels. Since you have an 18 inch wheel and 18 inch tire size, the Curt...
view full answer... - Installation Instructions Needed for Installing the Prodigy P2 and Wiring on a 1992 Chevy Astro VanWe have everything needed to install the Prodigy P2, item # 90885, on your 1992 Chevrolet Astro Van. You will need to start out with a 4-Way trailer connector at the rear of your vehicle. If you do not already have one you can use the 4-Pole Hardwire Kit Including Circuit Tester, item # 18252, to install one. Use the included circuit tester to find the correct functions behind the vehicle tail lights. Connect the white wire to a good ground, the brown wire to the tail light circuit, the...
view full answer... - What is Needed to Install the Prodigy P3 # 90195 Brake Controller on a 1967 Ford F-100Do you already have a fully functioning 7-Way connector at the rear of your 1967 Ford F-100? If not then you will need to install the Universal Wiring Kit # ETBC7 which includes all of the wiring and connectors needed to do so. As long as your F-100 has a 4-Way connector like part # 18252 you will have everything needed to install the Prodigy P3 # 90195 that you referenced. Simply connect the following 4 wires from the pigtail of the P3 to the following functions: Blue - 7-Way Output...
view full answer...
- Recommended Trailer Harness for 2003 Ford F-150If your 2003 Ford F-150 came from the factory with the 4-Way flat connector, then your truck already has a towing package wired in. In this case I would recommend 7-Way connect part # 118242. A 7-Way will allow you to tow trailers with 7-Way wiring systems and brakes. You can still use it with 4-Way trailers by using an adapter like part # 47345. Built into this adapter is a circuit tester to make sure truck wiring is hooked up properly. If you strictly want to use a 4-Way, then the part...
view full answer... - How To Install 4-Pole Hardwire Kit 18252The 18252 hardwire kit needs to be cut and spliced to your vehicle taillight assembly wires. I have included a link to a video of a hardwire install on a 2000 Dodge Neon. There are plug and play type wiring harness that are easier to install for some vehicles. I would be happy to confirm what the best wiring option is for your vehicle, if you write back with your vehicle year, make and model.
view full answer... - Parts Needed to Install 7-Way and Brake Controller on 2002 Isuzu NPRTo install a new, fully functional 7-Way connector on your 2002 Isuzu NPR you will need to start by hardwiring a 4-Way harness. There are not any plug-and-play harnesses available for your particular truck. If your truck has turn signals and brake lights that run on the same bulbs then I recommend the Tekonsha # 18252. If the turn and brake signals are on separate bulbs then you will use the Tekonsha # 119178KIT instead. This kit includes the converter that is needed to combine the circuits...
view full answer... - 7-Way Adapter vs. Full 7-Way Wiring Kit for 2005 Jeep TJ with 4-Pole WiringPollak part # HM40975-11933 is a kit that includes a short OEM - to - U.S. Car Connector wiring harness and a 7-way/4-pole combination connector that mates with the round U.S. Car connector end of that harness. The other end of the harness mates with the rectangular OEM connector under the vehicle which will be present only if your Jeep TJ came from the factory with a 7-way. If your Jeep has a 4-pole wiring harness like # 18252, with a connector like the one shown in the linked photo,...
view full answer...
- Can the Pins of a 4-Way be Moved AroundI have a solution for you, but the pins of the # 118381 cannot be relocated in the 4-way, you could however just cut the wires and splice them to different wires to move the circuits around. Sounds like you only really need a 4-way plug and lead instead of the # 18252, for that you would want the # A35W42B for a 6 foot long harness.
view full answer... - Is There a Trailer Hitch Available for the 1987 Ford Crown VictoriaI have a solution for you, but the Curt # 13707 is not a confirmed fit on your 1987 Ford Crown Victoria. Instead you'll want to use the Draw-Tite Max-E Loader # 41116 which has a 2" receiver and does not require any drilling into the frame of the vehicle for installation. To complete your towing setup you will need a few other items, like a wiring harness, ball mount and hitch ball. For the wiring kit you'll want to use the Tekonsha 4 Pole Hardwire Kit # 18252 (for combined 2 wire systems)...
view full answer... - Parts Needed to Add 4-Way to Motorhome that has 7-Way at Rear of itIf your 7-way has a round connector at the back that you could remove you could use the part # C55774 as a replacement for it and you'd have a 4-way separately that you could use for your magnetic lights. Or if you have a 7-way that does not have a connector behind it you could hardwire in one with the # 18252.
view full answer... - Will Curt Trailer Hitch 13703 Fit a 2017 Rockwood Ultralite TrailerCurt trailer hitch # 13703 is a universal type of product so to determine if it will fit your 2017 Rockwood Ultralite trailer you have to look at the installation instructions, linked for reference, and compare them to your trailer. This is the most versatile option though. It fits box, I-Beam, and C-Channel frames. It can be bolted on or welded on. Welding should be done by a professional welder. Otherwise installation is not all that difficult as you can see in the instructions. I also...
view full answer... - Brake Controller Recommendation for a 1998 Chevy K1500Yes, the Prodigy P3 # 90195 would work extremely well in your 1998 Chevy K3500s. This is the nicest brake controller on a market that I would highly recommend for you. You will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions...
view full answer... - Trailer Wiring Recommendations for Ford Super Duty Truck Late ModelIf your Ford trucks have a the 7-way round receptacle wiring that the # 74682 is designed to fit already the # 74682 would work great for you. If you do not have that harness then this wouldn't be the correct harness to get. If you don't have any trailer wiring you would need to start with a 4-way like part # 18252. To convert a 7-way you would only need part # 37185. If you plan to install a brake controller though you would need the part # ETBC7 instead of the # 37185. For a brake controller...
view full answer... - Dimensions of Curt Hitch 13407 for 2004 Ford Explorer Sport TracGood news! I was able to go out to our warehouse and measure the Curt Hitch # 13407. I have attached an image to this page for your viewing convenience. The Curt # 13407 is the confirmed fit for the 2004 Ford Explorer Sport Trac. This Curt Hitch # 13407 will even fit the Trac models that have a factory installed hitch. The wiring harness I recommend for your vehicle is the Draw-Tite # 18252 because it comes with a handy tester to help identify which signal is coming from which wire...
view full answer...
- Installing the Tow Ready Replacement Multi-tow 7-Way and 4-pole Connector on a 2005 Ford F250The Reese Multi-Tow 7-way and 4-pole connector # 74682 will plug into a factory installed connection if your truck was previously equipped with a 7-way. This is intended to replace the vehicle side connector on your truck. If your truck was equipped with a 7-way the factory connection point will be located on the driver's side on the frame rail between the rear tires and bumper. I have included a photo showing this location for you. If your truck does not have a 7-way but does have...
view full answer...
- 7-Way to 4-Way Adapter RecommendationTypically 7-way connectors already have combined stoplight circuits so all you would need is an adapter like part # PK12716. The red wire of a 7-way is typically the left turn/stop circuit so you might verify with a circuit tester like part # PTW2993 that the red wire you found doesn't also carry the blinker circuit. Otherwise you would need to make an adapter using a converter part # RM-732, 7-way # H20043, and 4-way # 18252.
view full answer... - Is there a Custom Fit Wiring Harness for a 2009 Smart ForTwoCurrently there is not a direct plug in harness for the Smart Car. The correct wiring harness is the 4-Pole Hardwire Kit, item # 18252, which includes a circuit tester to find the correct circuits on the vehicle to connect the trailer wiring to.
view full answer... - Trailer Hitch Receiver Recommendation For 2001 Dodge 2500 VanThe Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 75140 is the one I recommend for your 2001 Dodge 2500 Van. It is designed to fit both the step bumper and standard bumpers that came from the factory on your Van. The receiver is rated for 500lbs of tongue weight and 5,000lbs towing with a standard trailer hitch and with weight distribution hitches capacity doubles to 1,000lbs of tongue weight and 10,000lbs of trailer weight. A etrailer Anti-Rattle Hitch Stabilizer # e99007 will...
view full answer... - How To Install 7-Way Trailer Adapter On 2009 Ford F-150 Without Tow PackageFor your 2009 Ford F-150 without the tow package, you will need to splice into the wiring in order to install a 7 Way trailer adapter. If you do not already have a 4-Way plug-in on your vehicle, you first need to start with the 4-Pole Hardwire Kit # 18252, which will splice into the tail lights / turn signals on your vehicle. This kit comes with a circuit tester which you will need for the install. I have attached a demonstration video. After the 4-pole kit is installed, you can go ahead...
view full answer... - Do Vehicle Taillights Need to Function If Vehicle is Towed with Tow DollyGenerally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in. If you do need to have lights on the vehicle you could use the magnetic LED tow light kit part # TLL21RK and to add a 4-way to your tow vehicle's wiring you would want the part # 18252 which would wire into the current trailer wiring.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.