bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Jeep
  3. Wrangler
  4. 1990
  5. CURT
FITS 1990 Jeep Wrangler
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps

Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps

Item # C58044
Retail:$20.31
Our Price: $16.39
You Save: 19%
Custom Fit Vehicle Wiring
Confirmed to Fit
1990 Jeep Wrangler

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Jeep custom fit vehicle wiring experts, and offer a great price. etrailer.com carries a complete line of CURT products for your Jeep Wrangler 1990. Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps part C58044 from CURT can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (113)
  • Q & A (0)
  • Photos

1990 Jeep Wrangler - Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps

  • 4 Flat
  • Trailer Hitch Wiring
  • CURT
  • No Converter

Quick-splice wire taps let you splice this 4-way flat trailer connector into your Jeep Wrangler. Bonded wires are color coded to make installation a little easier.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
  • Works with 2-wire electrical systems
  • Splices into your vehicle's wiring with included quick-splice connectors
    • Bonded wires are color coded (see wire configuration below)
  • Includes durable, molded-rubber, standard female output socket


Specs:

  • Harness length: 60"
  • Max amperage: 7.5 amps per circuit
  • Wire gauge: 16
  • Limited 1-year warranty


4-Way Trailer Connector Installation

Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.


The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).


Wiring Configuration

Wire Color Wire Function
Green Right turn and brake light
Brown Tail lights and running lights
White Ground
Yellow Left turn and brake light


Quick Tips:

We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:

  • Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
  • Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
  • Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.


58044 Curt Jeep Wrangler Wiring Harness with Jeep Wrangler End 4-Pole Connector and Wire Tap Connectors - 5' Long


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps - C58044

Average Customer Rating:  4.7 out of 5 stars   (113 Customer Reviews)

Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.

by:

Perfect length and wired in with ease, Just wish it had a weather proof cap included. but still very happy



by:

Sent the wrong part after waiting 2 1/2 weeks

Etrailer Expert

Jenny N.

8/4/2023

Oh my goodness! Customer Service will be in touch as soon as possible.



by:
1987 JeepWrangler

This is a standard flat connector for attaching to a trailer. I don't have it installed yet, but it looks like it will work perfectly. The cable is long enough to connect to both rear lights.

Ken L.

10/24/2014

I finally got it installed. My 87 Jeep has had the wiring modified several times in its life so nothing was as it was supposed to be. I finally got all of the previous mistakes unwired, returned it to normal and then added the connection for the trailer. It was easy to install and worked perfectly. I like it and use it all the time.



by:

While it worked well, I threw out the supplied connectors and used more weather proof versions. But the wiring was long enough and I have had no issues with it.



by:
1997 Pontiac Grand Prix

Wire harness works fine but had no instructions, not even a identifier for which color wire does what. No ring terminal included for the ground wire. I think an end cap should be included on the harness due to the fact that there is power at the plug end any time the vehicles lights are operating. I ordered connector cover 20112, fits well on this harness.

Etrailer Expert

Heather A.

9/10/2018

The 4 pole trailer connector part # C58044 is designed with a green wire, yellow wire, brown wire and white wire. The green wire wires into the right turn wire of the vehicles wiring harness. The yellow wires into the left turn signal of the vehicles wiring harness. The brown wire wires into the tail light signal. The white is the ground wire that needs to be grounded to a clean bare metal surface on the vehicle. A ring terminal that accepts 14 gauge wire such as part # DW05737-1 can be used to ground the white wire. If you would like an end cap on the 4 pole connector I recommend part # 20112 by tow ready to protect the end of the connector. I have also attached a wiring help article to assist with the installation.



by:
2004 Pontiac Grand Prix

Hitch delivered quickly. The packaging is excellent. The condition of the hitch is new. The fixing kit, bolts and nuts correspond to the hitch. The video on the site was of great help in installing the hitch. I would like to have a video on the site how to connect the wires, but it's not difficult for an electrician. Problems with the installation of hitches on the car did not arise.

Etrailer Expert

Heather A.

8/23/2018

This Curt 4 pole part C58044 is a hardwire installation. I have attached a video of the hardwire installation for part # 18252 on a 2003 Pontiac Grand Prix. It is a different part number but the same installation. Although, I do recommend part # 56076 custom fit plug and play wiring harness for this vehicle. The plug and play option is a much easier installation.



by:

Will all I can say is it's a well-built good-looking product. It was very easy to install.And easy to wire it up.follow the instructions that you get am 71 years old and I did it All in 45 minutes.
When I was ordering this product customer service went out of their way to help me in any way they could.
I would recommend this company to anyone they are very pleasant people to do business with.and the shipping was right on time



by:

Ran this from the front of the 5th wheel and back so I could pull my other trailer. Another job well done...... Thanks

James

3/24/2021

Harness is still like brand new. The cover cap keeps the contacts nice and clean when not in use. Would buy again anytime.



by:

Was nice to be able to print out the text of the installation video. Clear and concise.

Paul

8/21/2022

Great, no issues. As good as the day I put it on.



by:

Had an embarrassing issue with one of the quick-splice connectors breaking - would recommend soldering all wires for longevity.



by:

Perfect for the application and reasonable price. I believe etrailer.com has spent some time considering which wiring kit is best for each vehicle.



by:

This attached very easily to my tail light wires. When not towing, I just shut it up in my trunk, and when I need to pull, I open the trunk and pull them out. I was very skeptical when I got the kit and saw the instructions, but it worked!



by:

I'll start by saying this arrived with my hitch in just a couple of days. It installed easily, as I have experience with wiring. It's high quality, and well made. I did not use the provided clamps that came with the wiring kit. I've found that splicing and soldering the connections with heat shrink tubing for protection is the best method.



by:

Easy install. Performs exactly as advertised. You will have to buy a special electrical kit to be able to hook up trailer lights.



by:
1991 Ford Van

Product worked okay, but the connectors didn't. They would not close and tap the main wires. I had to splice the wires in directly. Otherwise, It works.



by:
2012 Ford F-250 and F-350 Super Duty

Description of product should in bold letters describe that this is not for the trailer but instead for the vehicle. Product is of no use to me.

Dan A.

8/28/2013

Thanks for posting that. I was wondering the same thing. I need the other end, for the trailer to tow with my truck.



by:
2002 Dodge Neon

Looked like I would need more "stuff" to hook up my wiring harness.
However with the help of on line installation instructions.
Mission accomplished.



by:
2001 Ford F-250 and F-350 Super Duty

I have ordered many times through etrailer.com and have never been disappointed. Great service and ever good products. I wish you were in my home town.



by:

I have bought several items from etrailer for several years and I have never been disappointed, mislead, or had to return any of them. I have always found them to have several selections, thorough descriptions, competitive prices, and reasonable shipping charges. I live in a small town about an hours drive from any place adequately equipped for trailer needs. Internet shopping has solved this problem for me. Thank you etrailer.



by:

Just what I needed. Splice taps went right in the trash though. Crimp caps are reliable.



by:

Great product and at a great price, "etrailer" has now become my number 1 stop shop for all my trailer needs now. Due to speed and unbeatable price.



by:

I replaced the old wiring harness with this new one. Looks like a very good product.



by:

Dealing with etrailer has been nothing but a joy to do business with. They have a great selection and very reasonably priced. Fast service and delivery. I wouln't hesitate to do business with them again. Looking at their products is like being a kid in a Candy Store.....lol. Their products are first rate quality.



by:

Very easy to install, hardest part is putting the trunk liner back in place. Watch the YouTube video to get the correct wire colors.



by:

needed this to splice into an existing harness setup. works great. no problems


25
113
Show More Reviews

See what our Experts say about this CURT Custom Fit Vehicle Wiring

  • Recommended 7-Way Plug For A 2013 Ford F-150
    The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 is the trailer side plug. I believe you are looking for a female 7-way plug for your 2013 Ford F-150. The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 will plug into a 7-way plug on the truck. If you have a factory tow package on the 2013 Ford F-150, you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 which will plug into a port under...
    view full answer...
  • How to Install a Redarc Liberty Brake Controller on a 1974 Ford Bronco
    Installing the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 1974 Ford Bronco will require a few things to get up and running. I wasn't sure if you meant you had a pre-existing 7 Way on your Bronco or not, so I will be starting from scratch. If you do already have the 7 Way installed, you can skip ahead a bit. I do have to mention that I included videos for all these products, but they will just be examples as they will not be for your vehicle. So lets start with wiring. You...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for 2011 Keystone Passport 245RB
    As long as your 2011 Keystone Passport 245RB has a box frame, C-channel frame, or I-beam frame that the frame members are no more than 66" apart, you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704. This hitch can be bolted on to the frame with the included hardware and will provide you with a 2" receiver that will allow you to tow a trailer with. To install a wiring harness to power the trailer lights on your Keystone Passport you can use the Curt Vehicle Wiring...
    view full answer...
  • Trailer Hitch For 1985 Chevy G30 Van
    Definitely not as that's for mid-2000s Silverado/Sierra trucks; the trailer hitch with the highest capacity for your 1985 Chevy G30 van is the Curt Trailer Hitch Receiver # C13016. This has at 6,000 lb towing/600 lb tongue weight capacity that can reach up to 10,000 lbs towing/1,000 lbs tongue weight with the use of a weight distribution hitch. If you are indeed towing with the # C13016 and also need a 4-way wiring harness, the right fit is part # C58044.
    view full answer...
  • Recommended Hitch for Towing a Car with Mitsubishi Fuso FE180 with Lift Gate
    In order to determine if you can tow a car behind your Mitsubishi Fuso FE180 with lift gate you will need to check the owner's manual to determine the towing capacity for your specific model and configuration. Assuming the truck has the capacity to tow the car you are wanting to tow, I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" #41990-16. This hitch will fit as long as the outside to outside distance between the frame members isn't...
    view full answer...
  • Recommended 5th Wheel Rails, Hitch & Wiring Harness for a 2011 Ford F-350
    For your 2011 Ford F-350, I recommend checking out the Curt Custom 5th Wheel Installation Kit for Ford - Carbide Finish # C16424-204. This is an above-bed rail system that will easily install to your 2011 Ford F-350 and will provide a mounting point for a 5th wheel hitch like the Curt A20 5th Wheel Trailer Hitch w/ R20 Slider # C16541. Also. these rails will work with Curt, Draw-Tite, Hidden Hitch, Husky, Valley, & Reese 5th Wheel hitches. This hitch has a maximum towing capacity of 20,000-lbs,...
    view full answer...
  • Is There a Universal 4-Flat Trailer Wiring Harness That Connects to Tail Lights
    There are universal hardwire options for a 4-flat wiring harness that connects to your tail lights. I'm not sure if you were asking for the vehicle side or trailer side so I'll go ahead and give options for both: - Vehicle Side: Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C58044 - Trailer Side: Wesbar 4-Pole Flat Connector - 4' Long # W787264 or 8' Long # W787268
    view full answer...
  • Trailer Hitch Recommendation for a 1977 International Scout II
    Yes, the Curt Hitch part # 13580 that you referenced is a confirmed fit for your 1977 International Trucks Scout II that has a factory step bumper. Bumper bracket modification is needed since it's a step bumper. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,...
    view full answer...
    Image 1 for
  • Connecting a Hitch Light to 4-Way on a 2015 Ford F-150 So it Doesn't Deactivate Blind Spot Detector
    The easiest way to connect your hitch light to your 2015 Ford F-150 without it deactivating the Blind Spot Detector would be to install an aftermarket 4-Pole Connector. All you need to do is use the Curt 4-Pole Trailer Connector, part # C58044, and splice into your F-150's lights directly behind the tail light housing. The wire configuration will be: Yellow - Left turn/brake Green - Right turn/brake Brown - Tail lights White - Ground This should bypass the sensors for your Blind Spot...
    view full answer...
  • Recommendation For A Wiring Harness That Is 60 Inches Long
    Yes, I have what you are looking for! The Curt Vehicle Wiring Harness with 4-Pole Flat Connector, Item # C58044, is very similar to the Hopkins Wiring Harness, Item # HM48035, that you referenced. It is a universal wiring harness kit with all the necessary hardware needed for installation that is 60 inches long. I have attached a video for you to check out.
    view full answer...
  • Replacing Damaged Vehicle-Side 4-Pole Connector on Curt Wiring Harness
    Yes, you can replace just the damaged connector on the 4-pole harness on your 2013 Hyundai Santa Fe GLS. Hopkins part # HM48205 includes both vehicle- and trailer-side connectors (giving you a spare for the trailer) and quick-splice connectors. Similar products you might prefer include # C58044 that gives you a 60-inch length and # HM48030 which features an ergonomic-style plug. You will connect the white, brown, yellow and green wires color for color. I suggest wrapping the splices with...
    view full answer...
  • Can 1995 Jeep YJ Use Roadmaster Tow Bar Wiring Kit # RM-155 for Trailer Towing
    For your 1995 Jeep YJ, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118356 is what you will want to tow a trailer. This harness installs to the factory connections found beneath the rear of your vehicle on both the driver's and passenger's side. You will find the harness behind protective covers near the rear bumper. Then you can use the mounting bracket # 18144 to hold the harness in place. The Roadmaster # RM-155 does not connect to your vehicle wiring...
    view full answer...
  • Different Ways to Wire a Lighted Headache Rack
    I have two options for you to install a headache rack with lights such as the B&W Custom Headache Rack part # BWPUCP7500BA on your 2008 Ford F-250. However, both of them will require splicing as they do not make an in-line connector specifically for this application. If you wanted to make the headrack removable in regards to the lighting functions then you would need to install a 4-way like part # HMC20031 on the end of the wiring harness that goes to the headrack and then splice a 4-way...
    view full answer...
  • Troubleshooting Trailer Light Functions Not Working on 2014 Ford F-150
    On your 2014 Ford F-150 if you don't have factory wiring, you will simply splice into the tail light wiring at your tail lights to get the 4-way functions using # C58044. If you have the factory 4-way, then the harness may be bad or need help connecting. The Curt # C56110 is intended as a factory replacement for your truck. Make sure all the pins are not bent and the connection is free of debris or corrosion. If you have the factory 7-way, you will want to check your factory wiring...
    view full answer...
    Image 1 for
  • Recommended Brake Controller and Wiring for 1992 Damon Challenger Motorhome
    For your 1992 Damon Challenger, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This controller is a proportional controller that will allow your trailer brakes to apply at the same time and with the same intensity as you hit the brakes in your motorhome. You will need to hard wire this controller, and I recommend using the Universal Brake Controller Wiring Kit # ETBC7. You most likely will need the some extra wire found as part # 10-2-1as well. This kit will require...
    view full answer...
  • Recommended 7-Way and 4-Way Connector Combo for a 2005 Ford Excursion Eddie Bauer Edition
    The Curt item # C55774 and the Reese item # 74682 you were looking at fit almost any make of vehicle for the last 20+ years that came with a factory 7-way connector because they use a standard USCAR connector. A USCAR 7-way socket is a standardized automotive electrical socket that provides a connection point for trailer wiring. The Curt T-Connector Vehicle Wiring Harness item # C55774 includes both a 7-way and 4-way plug and is confirmed to fit your 2005 Ford Excursion Eddie Bauer edition...
    view full answer...
  • Parts Needed to Install Hayes Blackbird Trailer Brake Controller in 1994 Chevrolet Blazer
    To install the Hayes Blackbird Trailer Brake Controller in your 1994 Chevrolet S-10 Blazer you will use the following items in addition to the controller itself. You will need Universal Wiring Adapter # HA81789-HBC that plugs in to the back of the Blackbird and provides 4 leads for hardwired installation. You will also use our brake controller install kit # ETBC7 which includes a 7-way socket, wiring, connectors, circuit breakers, etc. - everything you need to install the Blackbird. I...
    view full answer...
  • 4-Pole Wiring Installation in 2001 Ford Explorer Sport Trac
    The 4-pole wiring kits offered for your 2001 Ford Explorer Sport Trac are hardwired types, Tekonsha kit # 18252 and Curt # C58044. I recommend the Tekonsha since it includes the required circuit tester, but if you already own a tester like # PTW2992 either wiring kit will be fine. You'll need to remove a taillight assembly or at least access the wiring leading to it so you can test those wires by lighting function to tell you which to connect to each 4-pole lead. An example of a Ford installation...
    view full answer...
  • Which 4-Way Wiring Harness Fits My 2004 Ford Expedition
    The Curt T-Connector Wiring Harness # C55384 is what provides your 2004 Ford Expedition with a 4-way connector by plugging directly into the 7-way harness that is included with the factory tow package. If you only have a 4-way that is hard wired into the Expedition then I recommend cutting off the existing defective plug and hardwiring a new one with the Curt Wiring Harness # C58044.
    view full answer...
  • Parts Needed to Install Trailer Wiring & Brake Controller in 1968 Chevrolet C/K Series Pickup
    Most camper trailers with electric drum brakes use a 7-way RV style plug like the one on part # H20046 and so you'll need a mating 7-way socket on the C10. This socket will carry all lighting signals as well as brake power and 12V auxiliary trailer power to your Casita. You will also need a brake controller to send power to your trailer brakes. You will need a 4-pole harness on the truck, which we'll then adapt to the 7-way type using our Brake Controller Install Kit # ETBC7. If you do...
    view full answer...
  • Recommended Vehicle Wiring Harness For 1995 Ford F-Series Super Duty Cab and Chassis
    I would be happy to help, but there is not a plug and play vehicle wiring harness available for your 1995 Ford F-Series Super Duty Cab and Chassis. If you are needing a 4-way connector we have the Curt # C58044 which will work for you though you will need to use a circuit tester liek # PTW2993 to confirm the functions of your factory wiring, or if you are needing a 7-way connector you will still need the # C58044 but will also need the # ETBC7. The # ETBC7 plugs into the 4-way connector...
    view full answer...
  • Can I Triple Tow With a 2018 Toyota Tundra SR5
    If the combined weight of your loaded travel trailer which is 7,500 lbs and your loaded utility trailer which 1,500 lbs for a total of 8,700 lbs is less than the towing capacity of your 2018 Toyota Tundra SR5 then yes, you can triple tow. If you do not already know the towing capacity of your Tundra there is a guide you can use on page 177 of your owner's manual. To use this guide you will need to know your model code which is found on the certification label inside the driver door jamb...
    view full answer...
  • Will 4-Way of Curt Wiring Harness # C58044 Connect to 4-Way of Trailer with 5 Wires
    The 5-wires that are ran to your 4-way means that you have a wishbone 4-way. That means that the running light circuit has two wires ran for each side of the trailer. The Curt 4-way part # C58044 would work well with this. The running light circuit of this kit uses only one wire but will work fine attached a 4-way that has these circuits split out for both sides.
    view full answer...
  • Trailer Hitch Receiver For a 1978 Ford Bronco Custom XLT
    The Curt Trailer Hitch Receiver # 14001 is designed to fit your 1978 Ford Bronco Custom XLT as long as you have a standard or step bumper. It will not fit if you have a roll pan style bumper. The Curt Vehicle Wiring Harness # C58044 will allow you to splice into your factory tail light wiring so you will have a 4-way flat. This is the common connector used on small trailers and will also allow for Auxiliary Lights # C53201.
    view full answer...


< Previous
123. . .5



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Sue W
Video Edited:
Sue W
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Sabrina W
Updated by:
Sabrina W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.