7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
Item # HM40975
Retail:$59.91
Our Price: $36.62
You Save: 39%
Confirmed to Fit
2015 Jeep Cherokee
with factory Tow Package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2383)
- Q & A (0)
- Photos
2015 Jeep Cherokee - 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Trailer Hitch Wiring
- 7 Round - Blade
- 4 Flat
- No Converter
- Hopkins
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your Jeep Cherokee's OEM wiring system and mounts with included bracket.
Features:
- 7- and 4-Pole trailer connector with mounting bracket
- Has high-impact, ABS plastic construction
- Stainless steel spring for easy cover operation
- Rubber gasket provides weather-resistant design
- Includes mounting bracket for easy, snap-in socket installation
- Black, epoxy-coated steel construction
- Mounts to bumper with included screws
Specs:
- Application:
- Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs
- Can be used to add a connector to 2003 and newer GM pickups and SUVs
- Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep
- Distance between mounting holes (center to center): 2-3/8"
- 1-Year limited warranty
Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Similar to 11775, PK11893
40975 Hopkins 7- and 4-Way Trailer Connector Socket with Mounting Bracket - Jeep Cherokee End
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975
Average Customer Rating: 4.8 out of 5 stars (2381 Customer Reviews)
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.by: ChrisP05/05/2024
This connector and bracket is a great product giving both 7 pin and 4 pin connections. I was able to reverse the bracket (making new holes) to allow it to fit behind the bumper cover piece that hides the hitch when not in use. The only drawback is that a wiring harness that fits the round 7 pin to the Buick Enclave rectangle plug is not available as a separate purchase. Had to buy an additional 7 pin outlet that came with the correct plug assembly and use that for my combo plug.
by: Michael07/12/2023
The box arrived opened and damaged. My wiring harness was missing. When I called to tell them my wiring harness was missing they told me that it was shipping separately but could not tell me when it would arrive. I later got an email telling me all of my items were delivered and asked me to leave a review. I still don't have my wiring harness and will not have the hitch installed by this weekend like needed because I don't know if I am ever getting my wiring harness.not to mention the box had no padding around the hitch so it's all scratched up.
by: 2006 Silverado 2500HD08/03/2023
Worked exactly how described, great replacement for my risty only bracket and 7 pin connector. Fits my 2006 Chevy Silverado 2500HD perfect, plug and play. Bought specifically because the bracket is included. And with both 4 and 7 pin connectors, I don't have to use an adapter anymore!
by: Jason06/24/2023
I am not sure how this bracket passed quality control. It sure is a good thing I'm not planning on using it. Really disappointing to see how quality is overlooked during the packaging process. This should have never left in this condition.
Jenny N.
6/30/2023
Oh! It is definitely not how we want the bracket to arrive to you. I will have our Customer Service team reach out.
by: Thomas 05/20/2024
This company is an absolute pleasure to work with. Item was delivered fast and exactly as described. This is the second item I’ve bout from etrailer the first being a 9000lb rated hitch. Will order again from these folks when if I need stuff for my truck.
by: Donald 06/19/2024
Very easy to install. The connection with the trailer plug is a snap.
by: James 02/28/2023
2021 Chevrolet Silverado 1500
Easy installation and very helpful installation video.
James
3/8/2024
One year later and no issues
by: Jim04/17/2024
It was easy to install and took care of the issue I had of one of the trailer light segments not working.
by: JimH05/13/2024
Very high quality connectors and bracket. Just what I needed.
by: Brad 04/11/2024
I bought this because I needed the bracket and it was the quickest way to get it they do not stock the bracket alone. We where installing tommy lifts and needed t move the original connector which was installed on the bumper.
by: William 05/06/2024
took longer to remove the factory cover than to instal the connector. worked as advertised. I would buy this again if ever needed
by: Ali 12/30/2022
This thing couldn't be better. Easy mounting. Plug and play. I can now connect any trailer I want. Love it, love it, love it!
Ali
1/7/2024
This was a major upgrade for me at the time. A year later, Ive hauled massive loads across the country, and this connector harness works perfectly every time
by: Ron P03/17/2014
2014 Chevrolet Silverado
Here's some snaps of my Hopkins #40975 installation. I can confirm that it's an identical replacement for the 2014 Silverado 1500 trailer-light blank insert, no bracket required. It took me 30 seconds to plug the Silverado's OEM 7-pin round connector (located inside the blank insert) into the #40975 Wiring Kit and snap it into the cutout. Then I tested the flat 4-pin outlet of the #40975 with a 5 dollar 4-pin LED tester from West Marine, and all light functions tested good. Shweet! To remove the OEM blank plug, it helps to reach behind it and pinch the two spring clips holding it in place... same with the #40975 if it needs to be removed for some reason. When I ordered the part from eTrailer, your site had a comment, "This will not fit your vehicle. See below for compatible parts," or words to that effect. Maybe take a look at that and remove the comment, as the #40975 is an exact fit for 2014 Silverado 1500, no bracket needed. Thanks, eTrailer team!
Ron P.
3/19/2015
Although I havent towed since installing the Hopkins Pollak wiring kit since I installed it a year ago, I have tested the 4-pin connector for proper function using a 4-pin LED tester from West Marine and it checks out okay. Recently I inspected the kit for water intrusion mentioned by one of the raters, and I found no evidence of moisture inside the dual-connector compartment. On installation, I did make liberal use of the dielectric grease that accompanies the kit. Good product, easy installation, and great price.
by: Matt W07/07/2018
2017 Nissan Pathfinder
It came with it's own bracket, which is a plus. It was compatible with etrailer.com's part number C56357, which is also a plus. The self tapping screws being the only hardware coming with the item was a disappointment. I just installed etrailer.com's part number 76301 hitch receiver which has a mounting plate for brackets like this. The self tapping screws, which might have been effective, wouldn't have looked "professional." After finding some hardware which worked, it went on smoothly and fits well with the rest of the assembly.
Matt W.
7/7/2019
This product has been working well for the past year. I feel this was a smart purchase.
by: Russell 05/21/2024
Plug and play baby! 2 minute install. Finally an easy fix to something!
by: Rob09/22/2018
2015 Audi Q7
Scratched my head for a while, trying to find a quality way to connect this vehicle end 4/7 wire socket to my trailer ready (almost) 2015 Audi Q7. Finally decided that it really didn’t need to be bolted, but could be hose clamped to the existing heavy duty Audi bracket.
Mounted it sideways with a 1” diameter and a 3” diameter hose clamp. Be sure to use a 3” clamp with lots of serrations that all it to tighten it down a lot.
You’ll need to drill out the small hole of the supplied bracket to allow a clamp to fit through it. The other hole is a slot, and works unaltered. Small clamp on bottom, large clamp on top.
You’ll also need to relieve a small spot on the trim piece to make room for the 4-wire door to o-en freely. This is marked as red on one of the pictures.
Looks good and should work good!
Rob
9/22/2019
Good installation approach for q7’s. Keeps water from collecting in wiring junctions.
by: Dennis 02/08/2024
2010 Ford Van
This dual connector adds a professional looking touch to our tow wiring installation
by: Mike07/15/2023
7 and 4-Pole Trailer Connector Socket does not fit my towing vehicle.
Today I just received my etrailer order #114979486, that consisted of: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector (ITEM # C56431) and 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End (ITEM # HM40975) for my 2020 Ford Ranger. I easily installed the harness, but the Trailer Connector Socket does not seem to fit on the rear bumper, next to the license plate.
Last week, I chatted with etrailer customer support rep and I was assured that the connector Socket (ITEM # HM40975) would fit on my 2020 Ford Ranger.
This etrailer customer support representative referenced a previous Q&A Topic titled, "Can the HM40975 be used on a 2021 Ford Ranger". I was also assured that 2020 and 2021 Rangers have identically constructed rear bumpers.
Today, I spoke with a different etrailer customer support representative. This rep told me 7-Way Trailer Connector (ITEM # C56431) was not compatible with the 2020 Ford Ranger recommend reaching out to the manufacturer directly for more information.
I'm very frustrated!!!! Can I please get a solution to this issue ASAP.
Jenny N.
7/19/2023
I am sorry that this has been a frustrating experience, however I do have an answer for you. The Hopkins connector part # HM40975 is technically not a fit on its own for a 2020 Ford Ranger. The short reason why is that the Ford Rangers do not have the round US Carr type of connector to plug into. Now by adding the Curt harness part # C56431 like you did, does make that round connector that you can plug into the back of the Hopkins connector that will give you the 7 and 4 way you want. Since it is using two different manufacturer products together, I do encourage you to test the 4 and 7 way to make sure all the signals are working correctly. In theory they work together, however they are not tested. The issue is going to be that the bracket that comes with the Hopkins connector is not going to match with anything on the Ford Ranger to connect to. It would just be bolted to the bumper or you could also consider using part # C57202 to install it on your hitch.
by: Mark 03/20/2024
2018 Chevrolet Silverado 1500
Item received as described. It was simply plug and play. Out with the old, and the new was an exact replacement. Very satisfied.
by: Bert 03/28/2024
The self tapping screws that come with the mount are junk,
The product is Good.
by: Lonnie04/08/2024
Great product, it was just what I was needing to complete my project.
by: Bill04/07/2024
2020 Chevrolet Silverado 1500
Another easy installation old one out doing in 15 minutes
by: Doug 11/02/2022
Fit and works fine. My old one was just the 4 plug so now I don’t have to use the adapter for 7 prong anymore.
Doug
11/3/2023
Works fine- no issues.
by: 1957okie04/03/2014
Great product at a great price. It was an exact fit and looks great. I like having the ability to plug in my 7-prong plug on my travel trailer or the 4-pin plug on my boat, without needing an adaptor. Got super fast shipping too. Buying from etrailer.com was a win- win-win.
Bob R.
5/31/2014
What year is your silverado
Rachael H.
6/4/2014
Randy S.
6/6/2014
Its a 2014 Silverado 1500 Double Cab
by: Steven 04/21/2024
2022 Nissan Titan
Came in on time. The parts were in good shape and fit perfectly.
25
2383
Show More Reviews
See what our Experts say about this Hopkins Custom Fit Vehicle Wiring
- Trailer Fuse Locations on 2017 Ford ExpeditionI looked at the owner's manual for your 2017 Ford Expedition to find the location of the fuses that are for towing a trailer. You might be best off checking your own manual to verify but here's what I found: In the power distribution box in the engine compartment the trailer lighting fuses and relays are cavities 24, 28, 31, and 39. The fuse for electric trailer brakes is a 30 amp in cavity 18. There are also two fuses labeled "Trailer Tow Module" in cavities 21 and 48. There's also...
view full answer... - Troubleshooting Dim Trailer Lights that Go Out Completely When Stepping on Brakes It sounds like you have a classic ground issue on your trailer that is preventing proper voltage from reaching back to the tail lights. What I recommend doing is first making sure the main ground for the trailer connector is secured to a clean bare metal surface. Then you can go back to the light assemblies themselves to make sure they are grounded in the same manner. Depending on their style your lights may use a separate ground wire or they might ground through their mounting hardware....
view full answer... - Replacement OEM 4-Way/7-Way Connector for 2019 Ford F-350We have exactly what you need! The Hopkins part # HM40975 is a direct replacement for the OEM 4-Way/7-Way connector on your 2019 Ford F-350 and is cost-effective so you don't have to sell any limbs. Attached is a review video for you to check out.
view full answer... - Does 12V Power Need to be Wired to 7- and 4-Pole Trailer Connector Socket on 2004 Chevy SilveradoThe 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 does not need to have the 12 volt circuit wired directly to it, assuming the factory connector on your 2004 Chevy Silverado is in working order. The reason why you do not need to wire the 12 volt circuit is because the connector is a fit for an '04 Silverado with a factory 7-way, and to install it you simply need to plug your Silverado's harness directly into the connector and you're done! I have added a link to a...
view full answer... - 7-Way Trailer Connector Recommended for 2019 Dodge DurangoYou can add a 7-way trailer connector and complete the brake controller wiring by using the Tekonsha OEM 7-way harness, part # TK22113. The harness plugs inline at the connection point between the taillight assemblies and the taillight wiring harnesses on the driver and passenger side. The body harness would be routed under the passenger side of the vehicle to the battery area where the black and red wires connect to the positive battery terminal. The blue wire in the harness connects...
view full answer...
- 7-Way Trailer Connector Installation 2014 Grand CherokeeIt is indeed be possible to install the Pollak # HM40975 7-way trailer connector as seen in the photos of the Draw-Tite # 75699. If you'll look underneath and behind the rear bumper of your GC, you should see a wiring harness that terminates in a round protective cap. If you remove the protective cap, the harness would plug into the rear of the # HM40975. The mounting bracket of the connector would connect to the rectangular piece of steel that extends from the hitch, to the left of the...
view full answer... - Recommended Trailer Hitch, Wiring, And Weight Distribution For 2015 Jeep Grand CherokeeThe towing capacity for your 2015 Grand Cherokee depends on how your vehicle is equipped. The difference in engine, transmission and suspension determine the towing capacity for your Jeep. I found the towing chart in the owner's manual and have attached it for reference. The towing capacity range for your vehicle is between 6,200-lbs and 7,400-lbs. The trailer hitch I recommend is the Curt, part # C13182. This is a Class lll hitch and it has a 2-inch receiver opening. No drilling is required...
view full answer...
- Activating 12-Volt Accessory 7-Way Circuit on 2007 Ford F150Since your F150 had the 4-pole connector, the towing circuits are most likely not fully active. To activate that charge circuit, you will need to install a fuse and relay into the fuse box. The fuse is a 30 amp in location # 106, and the relay goes in position # R05. These positions are shown in the fuse diagram on page 277 of your owners manual. You can obtain the relay from your Ford dealer or your local auto parts store.
view full answer... - Recommended Trailer Wiring Harness for 2019 Nissan Frontier With Both 4 and 7-Way ConnectionsThe trailer wiring harness options for a 2019 Nissan Frontier like the Curt T-Connector Vehicle Wiring Harness part # C56226 don't come with both a 4 and 7-way trailer connectors, only a 4-way or 7-way. That said, you can use the 7- and 4-Pole Trailer Connector Socket part # HM40975 with the Curt T-Connector Vehicle Wiring Harness no problem.
view full answer... - Is Hopkins Endurance Multi-Tow Twist-Mount Correct Replacement for 2007 Nissan Titan ConnectorAs long as you have the US Car Connector on your 2007 Nissan Titan then the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector # HM40920 will fit and work perfectly! Some other poplar options are the Curt T-Connector # C55774 and the Hopkins # HM40975. Both of these install using the same connector as the part you mentioned. The only difference is that the Hopkins you referenced is typically if your pickup has a cutout in the bumper area (see attached photo)...
view full answer...
- How To Help Keep the Curt Echo Mobile Trailer Brake Controller Secure While TowingThe majority of the complaints with the Curt Echo Mobile Trailer Brake Controller part # C51180 not being secure have a lot to do with the factory trailer connector they are being used with. These factory trailer connectors do not hold the same levels of tolerance as some of the aftermarket trailer connectors. The Curt Echo could fit perfectly inside the trailer connector on one 2015 Chevrolet Colorado without any play and then poorly on another 2015 Chevrolet Colorado. The solution to...
view full answer... - Adding a 7-Way Trailer Connector to a 2006 Ford F-150 with a Factory 4-Way Flat ConnectorThe 7-Way connector # HM40975 is designed as a replacement for an OEM 7-Way on a 2006 Ford F-150. What you will need is # 37185 and do a little hardwiring. What you will do is follow the factory 4-Way forward on the vehicle where it plugs into another connector along the driver side frame rail. This connector has more wires going into it than coming out to the 4-Way side. If you peel back the covering on the forward connector you will find some additional wires. There should be an orange...
view full answer... - Where Are the Fuses Located For Trailer Lights On a 2015 Ford F-250There are several fuses and relays you need to check for the trailer lights on your 2015 Ford F-250 and they are located in the engine bay and interior fuse box. There are no other fuses or relays that relate to the trailer lighting circuits so if you don't have lights once these are checked and or replaced then first make sure the pigtail at the back of the trailer connector is secure but if so then you will just need to take the vehicle in for service as it could be an issue with the...
view full answer... - 7-Way And 4-Pole Mounting Bracket Recommendation For A 2018 GMC Sierra VanYes, the Replacement Mounting Bracket for Hopkins 7- and 4-Pole Trailer Connector Socket # HM40978 is going to be the best option for your 2018 GMC Sierra Van. This part is just a bracket, however if you're interested in a complete kit including the connectors that fit the bracket, I recommend taking a look at the: -7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975. This connector & mounting bracket is designed to replace your factory 7-way connector, and is made from...
view full answer... - 7-Way/4-Pole Trailer Connector for 2017 Toyota Tundra That Doesn't Used Sideways Swinging CoversI believe the Tundra uses the # HM40975 for the trailer connector. Typically they fit pretty tightly, so we haven't got much in the way of comments about folks having the difficulty you describe. For a more traditional-style connector that would still provide both a 7-way and a 4-pole connector, I'd recommend the use the # C55774 replacement connector. This trailer connector assembly uses a top-hinged cover/keeper for the trailer plug, and would very likely work better than what you currently...
view full answer... - Adding A Wiring Harness To Your HItch Receiver Of 2020 Jeep Grand CherokeeThe T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118727, will work with your vehicle. I also understand the desire to have a clean look after installing your trailer hitch wiring harness, I can attest to how sloppy it can look on your vehicle as I have a trailer hitch wiring harness hanging on my vehicle. Unfortunately, I cannot guarantee that the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part # HM40975, will fit into this cut out in your hitch...
view full answer... - Replacement 7-Way Wiring Harness for 2004 Chevrolet SilveradoFor a replacement wiring harness I recommend the Tow Ready Replacement 7-Way Harness and Socket for Factory Tow Package # 20147. This will replace your damaged OEM wiring harness and socket on your 2004 Chevrolet Silverado so you can use your Hopkins 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975 again. I have attached a video review for your reference.
view full answer... - How to get a 7-Way and 4-Way Connector for a 2000 Ford F250 Super Duty with Damaged 7-WayThe two parts you will need to replace your damaged 7-way on your 2000 Ford F-250 and add a 4-flat connector to the rear of your vehicle is the Tow Ready Custom Fit Vehicle Wiring for the 2000 Ford F 250 and F 350 Super Duty, # 118243, and the Hopkins Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End, # HM40975. The Tow Ready harness # 118243 is an exact replacement for the damaged OEM Wiring Harness and connects directly to the Standard OEM Connector. It...
view full answer... - Compatibility Of Hopkins 7/4-Way Connector HM40975 With Curt Vehicle Harness C56143 2019 Ford F-150Yes, the Hopkins 7- and 4-Pole Trailer Connector Socket # HM40975 will connect to the the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56413 on your 2019 Ford F-150. The Hopkins connector has an OEM design and will fit the factory cutout in your rear bumper.
view full answer... - Replacement Trailer Connector for a 2012 Ford Super DutyThe harness you see pictured in connector # HM40975-11998 plugs into the back of that connector so it would look like the opposite of what is on the back of the connector. If you do not need the wiring harness part then you would just use # HM40975. If you do need the harness it will have to be wired into the trucks tow package wiring by function by testing the vehicle wiring using a circuit tester such as # PTW2993 to determine the functions. The wire functions of the harness in # HM40975-11998...
view full answer... - 2020 Chevy Colorado Trailer Connector Wire GaugesThe part you mentioned is a actually manufactured by Pollak, which we sell as part # HM40975. If your Colorado has the factory tow package featuring the US CAR connector under the rear of the vehicle, it would plug directly into the # HM40975. If you don't have the factory tow package you can still install that connnector, but the US CAR connector won't be present and you'd need to hardwire it using # HM40975-11998, which provides both the pigtail and the connector. The wire colors/gauge...
view full answer... - Prodigy P2 Trailer Brake Controller Showing Numbers When Disconnected on 2011 Cadillac EscaladeIf your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 has numbers scrolling on the display when it is not connected, it seems likely you have some sort of corrosion on the brake output circuit of your 2011 Escalade's 7-way. It would seem that the brake controller thinks that your trailer is still connected, which would explain the numbers. I recommend removing the connector from the socket of your 7-way and cleaning the pins to see if that does the trick, and a replacement 7-way...
view full answer... - Replacement OEM Tow Package Wiring for 2014 Chevy Silverado That Works with Hopkins 7 Way ConnectorYou're on the right track. The Tow Ready Replacement 7 way Harness # 20147 will fit on the Hopkins # HM40975 (which is the same as the 40974) and allow you to splice into the factory towing wires using the included butt connectors.
view full answer... - Which Pin of 7-Way Tells Truck that Trailer is ConnectedYes the 12 volt accessory circuit of the 7-way on a 2014 Ford F-150 would be active all the time but this isn't the circuit that tells you when a trailer is connected. That circuit is the brake output circuit. This circuit puts out an intermittent pulse of current and if it detects the load of trailer brake magnets it will let you know that a trailer is connected.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Matthew B
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
David F
Video by:
Aidan B
Video by:
Thomas T
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
8/3/2023
I am sorry to hear that your order arrived in this condition. I see that our customer service department is currently working on a solution for you.