4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $28.69
Confirmed to Fit
2023 Ford F-250 Super Duty
without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (209)
- Q & A (0)
- Photos
2023 Ford F-250 Super Duty - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- No Converter
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Ford F-250 Super Duty Wiring Harness with Ford F-250 Super Duty End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: Frank07/08/2020
I purchased the Draw-Tite Receiver and wiring kit. All parts were easily identified. Good printed instructions. Everything assembled easily and fit perfectly. It took about 1.5 hrs to complete. It will be used to tow a small utility trailer. Highly recommend this equipment and etrailer.com. Thanks.
by: big chicken07/03/2015
2003 Ford Focus
Perfect & simple as one, two three then your done. Thanks etrailer
Super Fast delivery from etrailer 5 star*
Big C.
7/27/2016
Everything is still working great.100 satisfied with the hitch and all I purchased.
by: Jason05/18/2020
Ordered a few weld on trailer hitch receiver tubes among other trailer parts. Parts were delivered in a timely manner and the quality of the receiver tubes is excellent. I will buy from this group in the future when I need trailer parts.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Parts Needed to Tow a Trailer with Brakes Using a 2004 Ford Explorer Sport TracFor the Class III trailer hitch receiver I suggest the Draw-Tite # 75112. This is a custom fit 2 inch hitch receiver that will fit your 2004 Ford Explorer Sport Trac. The B&W Tow & Stow # BWTS10037B is a great adjustable ball mount that provides either 5 inches of drop or 5-1/2 inches of rise. It will also store under the hitch when not in use. Use locking hitch pin # BX8858 or standard pin and clip # PC3. If the Tow & Stow doesn't work with your setup I've linked our selection of...
view full answer... - Will Curt Trailer Hitch 14002 Fit a 2011 Ford F-150 Harley Davidson EditionI spoke with my contact at Curt who said that they have not heard of any fit issues with hitch # C14002 and the Harley Davidson models of the 2011 Ford F-150 so he said it should fit just fine. The only issue is that if your truck came with a factory trailer hitch then Curt hitch C14002 will not fit. I have included a link to a video showing a typical installation and a link to the instructions. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with...
view full answer... - Hitch Recommendation for a 2004 Ford FocusYes, the hitches for the sedan 2004 Ford Focus will also fit the hatchback models. For example, the Draw-Tite part # 24692 that you referenced will fit either model. For trailer wiring you would want the part # 18252. For a hitch ball you would part # 19256 for 1-7/8 inch ball or part # 19258 for 2 inch ball.
view full answer... - Recommended Trailer Hitch for 1997 Chevy Cavalier LS ConvertibleFor your 1997 Chevrolet Cavalier LS convertible, I recommend the Curt Trailer Hitch Receiver # 24733. This Class I trailer hitch is confirmed to fit your vehicle as long as your Cavalier is not the Z24 model and will provide a 1-1/4 inch receiver opening with a 2,000 pound towing weight capacity. I also recommend checking your copy of the owner's manual to see what the vehicle's specific towing capacity is, as it may be less than what the hitch can support. You will need to stay below...
view full answer... - Will C55312 T-Connector Vehicle Wiring Harness Fit 1984 GMC S15 PickupTo install a 4-way on your 1984 GMC S15 Pickup, you will need to hardwire a connector like Draw-Tite 4-Pole Hardwire Kit, # 18252. Just use the included tester to locate the vehicle's right turn signal, left turn signal, and tail light circuit. I have included a wiring chart and install video for you. Part # C55312 is designed for the 1985 to 1990 GMC S-15 pickup so this would not work for your 1984 model.
view full answer...
- 4-Way Wiring for 2022 Ford F-150 With Backup Sensors and Incandescent LightsThe only company that makes a plug and play 4-way compatible with backup sensors is Curt and it is the # C63NR. I'm guessing you already found this and saw it is only compatible with LED tail lights. You can either splice-in the # 18252 or swap out the tail lights for LED to use the Curt. Unfortunately, nobody makes a plug and play wiring harness that will work with the backup sensors and incandescent lights.
view full answer... - How to Wire Taillights on 2007 Chevy 5500 Cab/Chassis Flatbed As Spearately Wired Taillight SystemTo make this operate, you will need the Vehicle to Vehicle Tail Light Converter, part # 118158. The converter will split the directional and brake light signals onto separate circuits. The standard lighting circuits from the vehicle enter the input side of the converter, green wire for right directional/brake, yellow wire for left directional/brake, brown wire for running lights, white wire to ground. On the output side, the wires serve the same function, but the red wire will carry the...
view full answer... - Does Bumper Need To Be Trimmed On Hummer H3 When Installing The Draw-Tite Class III Hitch, # 75382There is no cutting or trimming of the bumper on the Hummer H3 when installing the Draw-Tite Class III Trailer Hitch, # 75382. The installation on your Hummer H3 is a very simple bolt-on application. The hardest part might be lowering the exhaust for ease of installation. I am sending a link to the installation instructions for the Draw-Tite Class III Trailer Hitch, # 75382. If you will be towing, you will need the Curt Ball Mount, # C45010, and the Pin and Clip, # PC3. You will also...
view full answer... - Recommended Trailer Harness for 2003 Ford F-150If your 2003 Ford F-150 came from the factory with the 4-Way flat connector, then your truck already has a towing package wired in. In this case I would recommend 7-Way connect part # 118242. A 7-Way will allow you to tow trailers with 7-Way wiring systems and brakes. You can still use it with 4-Way trailers by using an adapter like part # 47345. Built into this adapter is a circuit tester to make sure truck wiring is hooked up properly. If you strictly want to use a 4-Way, then the part...
view full answer... - Hitch Recommendation for a 2005 Ford Focus with Street Appearance PackageI contacted our representative at Curt about your 2005 Ford Focus ZX3 with the street appearance package. He informed me that the Curt Trailer Hitch, part # C11294, will bolt up to the frame the same, but you will need to trim the rear bumper cover or rear diffuser. You should not have any problems as long as you make a cutout in the rear diffuser or bumper cover for the hitch receiver. The Curt Hitch # C11294 Includes a Drawbar, Pin and Clip. You may be interested in the following items...
view full answer... - Installation of CURT Trailer Hitch 11119 on a 2008 Pontiac SolsticeYes, the installation procedure you see in the video would be the same for both the 2008 and 2009 model years of the Pontiac Solstice. As long as your vehicle is not a GXP model, you would be able to use the hitch # 11119 you referenced. To install the # 11119 CURT trailer hitch on your vehicle, you will first fish wire the included spacers and bolts through the existing holes on your vehicle frame. Then, you will place the passenger side attachment bracket over the exhaust with the driver's...
view full answer... - Recommend Brake Controller For 1967 M416 Military Trailer Being Pulled By 1978 Jeep CJ5I would recommend going with a proportional brake controller like your Tekonsha Voyager, part 39510. With a proportional controller, the rate at which the tow vehicle is slowing down, power will be sent to the trailer brakes. A proportional controller is going to give you the smoothest braking. For a brake kit, you would need to pull apart your hub to see what bearing numbers your hub uses. If you can send me the bearing numbers, I can look to see what brake kit will work on your trailer....
view full answer... - Will Draw-Tite 4-Way Hardwire Kit # 18252 Fit a 2003 Chevy CavalierThe wiring system on your 2003 Chevrolet Cavalier is a 2-wire system, which means you do not need a wiring harness kit with a converter box. A converter box is only needed if your vehicle would have separate wires for the brake and turn signals. The Draw-Tite 4-Way Hardwire Kit, part # 18252, will work on your 2003 Chevrolet Cavalier. This is a standard 4-Way wiring kit that will tap into the tail light wires by function. It includes a circuit tester that will allow you to test the wires...
view full answer... - Parts Needed to Install a Curt Trailer Brake Controller on a 2003 Chevy BlazerBrake controllers are not vehicle specific so you can use the Curt Venturer on your 2003 Chevy Blazer. There are a few things that you will need first though. If your Blazer does not already have a 4-Way trailer connector then you will need to add one using # 18252. Then after the 4-Way is installed (or if the Blazer already has a 4-Way) you will need to install a 4- and 7-Way installation kit # ETBC7. The 4-Way plugs into the matching 4-Way on the ETBC7 and the remaining wires will get...
view full answer... - Wiring Harness Recommendation For 2009 Hummer H3T Without Towing PackageIf you do not have a connector at the rear of your 2009 Hummer H3T, I recommend the Draw-Tite Custom Fit Wiring, part # 18252. This harness comes with a circuit tester to help locate the wires you need to tap in to. If you need a 7-way connector on the back of your H3T, you will need an installation kit like part # ETBC7. This will attach to the 4-way connector and with additional wiring give you a 4-way and a 7-way connector at the back of your Hummer. If you need a brake controller,...
view full answer... - Trailer Running Lights Not Working When Connected to 4-Pole Harness # 18252 on 2007 Ford F-150The first step for troubleshooting your 4-pole installation is to check that the lighting functions on the vehicle itself are operating correctly. This needs to be checked first since the part you referenced, Draw-Tite 4-Pole Hardwire Kit # 18252, relies on input signals from the vehicle lights to send output signals to the trailer. If the vehicle lights are not working properly you will need to get those fixed first. Once you have confirmed the vehicle light functions are all okay you...
view full answer... - Recommended 2-Inch Trailer Hitch for 1997 Ford F-150 4.2L V6We offer several classes of 2-inch trailer hitch receiver for your 1997 Ford F-150 V6 and these vary in their tongue weight (TW) and gross towing weight (GTW) capacities. Just click on the link provided to view our main page for F-150 hitches, then simply use the Select Vehicle Style drop-down menu at the top of the page to choose your bed style. All hitches include the required mounting hardware and I have linked an install video and article to help. For instance, if you want the highest-rated...
view full answer... - Will a Bumper Support Bracket Interfere with Trailer Hitch Installation on a 1998 GMC JimmyAfter reviewing the video that you referenced, which is for hitch # 90183, it appears that the upper connection point for that bumper support bracket will not interfere with the mounting of any of the available trailer hitches for the 1998 GMC Jimmy. In the event that your vehicle is different, it is permissible to relocate the upper support bracket connection point should it interfere with hitch installation. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, #...
view full answer... - Hitch Recommendation for a 2006 Ford E-150 VanI checked with Curt and the Curt Trailer Hitch part # 14055 that you referenced is confirmed to fit your 2006 Ford E-150. I attached installation instructions and an installation video for this hitch for you to check out as well. To complete your towing setup you may also be interested in the following products: etrailer Ball Mount kit # EBMK2216 Draw Tite Trailer Wiring # 18252
view full answer... - Trailer Brake Controller Wiring Harness for a 2000 Ford F-150Brake controller wiring harness # TK93VR fits 2011 to 2014 Dodge Durangos and Jeep Grand Cherokees but not the 2000 Ford F-150. For your Truck you will need # 3035-P. If your truck has a factory 4-Way trailer connector you will also need to add # 118242 to add a 7-Way and make it fully functional. If your truck did not come with any trailer connector you will first need to add a 4-Way using # 18252. Then you can hardwire in a 7-Way using # ETBC7. I have included some links that explain...
view full answer... - Is Circuit Breaker Needed When Installing Draw-Tite Brake Controller # 5504 On 2000 Chevy SilveradoIf your 2000 Chevy Silverado has the factory 7-way trailer connector on the rear of the vehicle you can use the Draw-Tite Brake Controller # 5504 and the Draw-Tite Universal Wiring Adapter # 3025-S. A circuit breaker and a fuse do the same thing in keeping a circuit from being overloaded. The difference in the two is that the fuse is one time use only, and the circuit breaker will reset after a certain amount of time. A fuse will just plug into a slot and a circuit breaker has to be wired...
view full answer... - Troubleshooting Trailer Wiring For Double Towing Camper and Motorcycle Trailer Behind 2016 TundraIt sounds like you want to tow 2 trailers and need the wiring for both. It is completely possible to do that as long as your truck can handle the total weight of the two loaded trailers. For the wiring, there are a couple of different options. You can run an extremely long harness like you mentioned that will be a simple customized length or you can tap into your trailer wires to create a harness at the back of your camping trailer. My recommendation is to do the latter. To tap...
view full answer... - Installation Procedure For Draw-Tite 4-Pole Hardwire Kit # 18252 On A 2008 Ford F-150 Crew CabTo install the Draw-Tite 4-Pole Hardwire Kit Including Circuit Tester, part # 18252, on your 2008 Ford F-150 you will need to access the wiring harness behind each tail light assembly, starting at the drivers side. Activate the left turn signal, and use the tester included in the kit to probe each wire going into the tail light assembly. Once you find the wire that makes the tester blink with the turn signal, tap the yellow wire for the 4-pole wiring harness into that circuit using the...
view full answer... - How to Hardwire a Trailer Connector on a 2008 Mercury Mariner If you do not wish to retain the factory backup sensors on your 2008 Mercury Mariner then you can use the 4-Pole Hardwire Kit with Circuit Tester part # 18252 instead of the Tow Package Wiring Harness with 4 Pole Trailer Connector part # 118251. In order to do this you will need to cut off the connector that attaches to the backup sensors and splice the above harness into those connections using the included circuit tester. The backup sensors and tow package wiring are on the same connector....
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Vincent S.
5/31/2020
Just fine.