Hitch Recommendation for a 2005 Ford Focus with Street Appearance Package
Question:
I have a 2005 focus ZX4 with the street appearance package. I think i can still use this part C11294 but will have to trim the rear bumper slightly, is this true? thanks,
asked by: Dan L
Expert Reply:
I contacted our representative at Curt about your 2005 Ford Focus ZX3 with the street appearance package. He informed me that the Curt Trailer Hitch, part # C11294, will bolt up to the frame the same, but you will need to trim the rear bumper cover or rear diffuser.
You should not have any problems as long as you make a cutout in the rear diffuser or bumper cover for the hitch receiver.
The Curt Hitch # C11294 Includes a Drawbar, Pin and Clip. You may be interested in the following items to complete your towing setup:
Vehicle Wiring, part # 18252
1-7/8 Inch Hitch Ball, part # 19256
2 Inch Hitch Ball, part # 19258
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Ford Trailer Wiring For Non-Tow Package Connection on a 2006 Ford Escape
- Q&A: Can 3 Spacers be Used for Curt 11294 Hitch Install on 2007 Ford Focus
- Article: How to Charge a Dump Trailer Battery
- Q&A: Can Trailer Valet XL Be Used on Sloping Driveway
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness Options for 2007 Ford Focus
- Q&A: Installing a Transmission Cooler in a 2001 Ford Focus, 5-Speed
- Q&A: Recommended Replacement Hardware for a Curt Hitch
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams