7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter

See what our Experts say about this Pollak Custom Fit Vehicle Wiring

• Does Pollak 7- and 4-Pole Trailer Connector have 12 Volt Hot Lead for 2014 Jeep Wrangler Unlimited
  Yes, the 7-Way part of Pollak 7- and 4-Pole Trailer Connector # HM40975-11933 has a 12 volt circuit provided that the vehicle it is installed on has that circuit active. This part is designed to work with a 2014 Jeep Wrangler Unlimited that came with a factory 7-Way. If your Jeep came with a factory 4-Way or no trailer connector then it is not likely that the 12 volt and any other circuit other than the lighting circuits will work. To add a 7-Way if the Jeep did not come with a factory...
  view full answer...
• Parts Needed to Install 4-Way and 7-Way Connectors on a 2016 Jeep Wrangler Unlimited
  If you don't already have electrical connectors on your 2016 Jeep Wrangler Unlimited then you will need to start off by installing a 4-Way connector like the T-One # 118416. This plugs in behind your tail lights and will give you the basic lighting functions for your trailer. One the T-One is installed you need to install the Universal Wiring Kit # ETBC7. This comes with all of the wiring and connectors you need to have a fully-functioning 7-way (and 4-Way) at the rear of your Jeep. If...
  view full answer...
• 4-Way and 7-Way Trailer Wiring Recommendation for 2009 Jeep Wrangler Unlimited
  For your 2009 Jeep Wrangler Unlimited with a factory 4-way trailer wiring harness the Pollak 7-Way and 4-Way part # HM40975-11933 that you referenced would be exactly what you'd need. This will replace the 4-way you have now and give you a 4-way and 7-way.
  view full answer...
• What Vehicle Fuse Controls Trailer Interior Lighting and Can it be Bypassed
  On a truck the circuit that would control the interior lights of a trailer would be the 12-volt accessory trailer circuit. Sometimes this circuit doesn't come on unless the vehicle is running or with the key on so you might try doing that as well to determine if the circuit is "working." One solution that we recommend for a lot of people with issues with this circuit is to bypass the vehicle wiring and run a wire directly from the battery of the truck to the 7-way so that you can have...
  view full answer...
  
• Trailer Brakes Activating With Brake Pedal Is Pressed With No Brake Controller Installed
  If you're getting voltage to the trailer brakes with no controller installed, and when it WAS connected it wasn't reading the brakes, it sounds like your trailer connector on the vehicle is either damaged or has had corrosion spread to the terminals inside where the wires attach. Once the terminals corrode, the corrosion builds up can can actually allow adjacent circuits to bridge which would explain why you get brakes without a controller installed. It's possible that the brake lamp circuit...
  view full answer...
• Compatibility of Hopkins HM42190 With 2016 Jeep Wrangler with Tow Package
  Since your 2016 Wrangler Unlimited has the factory tow package, you should be able to plug the # HM42190 right in. To confirm, you'll want to follow the wire feeding your 4 pole under the vehicle to where it plugs into the tow package harness. If that plugs into a rectangular connector, you'll simply unplug that connection, and plug the rectangular connector on the # HM42190 into it. If you wanted both a 4 pole and a 7-way, you could use part # HM40975-11933 which would install the same...
  view full answer...
• Availability of Dodge Adapter Harness to Move 7-Way from Rear of Truck with Square Connector
  I believe we have exactly what you are looking for. The Hopkins 7-Way Harness part # HM42137 is a kit that plugs into the square connectors of your truck and allows you to install a second 7-way elsewhere in the truck bed. Typically this is installed up near the wheel well for gooseneck or fifth wheel applications. The harness is a bit longer than you need at 10 feet but would still work well.
  view full answer...
• Do I Need to Have My 2017 Jeep Grand Cherokee Reconfigured When Installing a Wiring Harness
  When you are installing a wiring harness, like part # HM40975-11933, on your 2017 Jeep Grand Cherokee, you will need to take it to your local Jeep dealer to have them reconfigure the settings on your Jeep for you.
  view full answer...
• 4-Way to 7-Way Adapter Recommendation for a 2015 Equinox LTZ
  We have exactly what you would need. For an adapter that would convert your 4-way to a 7-way for just controlling the taillight functions of the trailer you would want the part # 37185. The current 4-way you have on your 2015 Chevy Equinox will plug right in to the 4-way of this adapter and it will be ready to go. This comes with a bracket that will allow it to easily be mounted to your bumper. Check out the install video I attached for more info as well.
  view full answer...
• Do You Have the Bracket Separate From the HM40975 Connector
  I am sorry but at this time we do not sell the bracket separately for the HM40975-11933. We do have the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, part number HM40975, available without the plug adapter wiring.
  view full answer...
• Brake Controller and Weight Distribution Recommendation for 2015 Jeep Wrangler Unlimited
  Since your 2015 Jeep Wrangler Unlimited came with the factory tow package the wiring harness you will want is the part # HM40975-11933 as it will give you both a 4-way and a 7-way. Now to install a brake controller what you'll need is the part # 5506 which will complete the wiring of the brake controller to the 7-way. If you check out the install video I attached below you'll see exactly how we did this on a similar 2017 Unlimited like yours. For a brake controller I would recommend the...
  view full answer...
• Best Trailer Wiring Harness for a 2018 Jeep Cherokee
  It sounds like you are looking for a trailer wiring harness that will use the vehicle's lights to provide signals for the trailer's lights. If this is the case then I recommend using T-One Vehicle Wiring Harness part # 118605 if you do not have the factory tow package. This kit is an almost entirely plug and play option that will provide you with a 4-way trailer connector. If you do have the factory tow package then I recommend using the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933...
  view full answer...
• Recommended Brake Controller and 7-Way Connection for 2005 Jeep TJ Unlimited Rubicon
  For your 2005 Jeep TJ Unlimited Rubicon I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. This proportional brake controller has a 3-Axis accelerometer which allows you to mount the main unit in any position out of sight which means it won't be taking up space in your Jeep. The control knob can mount anywhere in your vehicle and allows for fast and easy adjustment. You will also need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR to...
  view full answer...
• Trailer Hitch Receiver, Brake Controller, And 7 Way Plug For 2016 Dodge Durango With Tow Package
  The Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame # 75713 is the correct hitch receiver for your 2016 Dodge Durango Citadel. This has the highest weigh capacity of the available receivers for your vehicle; it is rated at 900lbs max tongue weight and 6,000 lbs max towing weight, or 7,500lbs max towing weight when used with weight distribution hitch. Keep in mind that the hitch receivers for your vehicle only allow up to an 18" spare to be stored under the vehicle. For the trailer...
  view full answer...
• Converting 4-Way Trailer Connector to a 4- and 7-Way Connector on a 2017 Jeep Wrangler Unlimited
  Take a look at how the factory 4-way of your 2017 Jeep Wrangler Unlimited is installed. Follow the harness to see where it plugs in. If it has a rectangular connector like the # HM40975-11933 plugs into then this will work for you. You also will need to add wiring using our # 5506 kit in order to install a brake controller. If your Jeep's 4-way doesn't plug in using that type of connector, or if you just want to run everything new instead of having to find the correct wires in the Jeep...
  view full answer...
• Recommended Trailer Connector And Wiring Harness For 2014 Jeep Wrangler Unlimited With Tow Package
  For your 2014 Jeep Wrangler Unlimited with factory tow package, I recommend the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933. This kit gives you the wiring adapter you were asking for as well as the trailer connection with both 7-way and 4-way connections you were asking for. This is a confirmed fit for your vehicle with factory tow package.
  view full answer...
• Brake Controller and Wiring Harness for a 2016 Jeep Grand Cherokee with Factory 7-Way Connector
  Of the 3 vehicles you are looking at it will be easiest to add a brake controller to the 2016 Jeep Grand Cherokee with a factory tow package that includes the factory 7-Way trailer connector. The others, Volvo XC90 or Honda Pilot, would require at least a partial hardwire of the brake controller and routing wires through the firewall and splicing into the brake switch. With the Jeep Grand Cherokee with factory 7-Way all you will need is the brake controller and wiring harness. I recommend...
  view full answer...
• How to Install 7-Way Connector on 2005 Dodge Ram 1500 with Factory 4-Way
  I do have a solution for you, but the # HM40975-11933 will not work since your 2005 Dodge Ram Pickup did not come with a factory 7-Way trailer connector. If what you're looking to do is upgrade your factory 4-Pole connector to a fully functioning 7-way, then what you need is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7. This will allow you to run your brake output, reverse light and 12V power wires, which aren't pre-wired from the factory on your truck.
  view full answer...
• How to Add 7 Way Connector to 2011 Dodge Dakota with 4 Way Factory Plug
  The 2011 Dodge Dakota came with a factory 7 way, so it's possible that you potentially had the 4 way installed aftermarket- but I have a way you can check. If your 4 way is plugged into a square plug similar to the one shown in the attached picture, you can use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933 which will leave you with an active 4 way and also add a 7 way connector to your factory wiring. If your 4 way isn't...
  view full answer...
  
• Adding 4-Way Trailer Connector to 2016 Jeep Cherokee Trailhawk with OEM 7- and 4-Way Connector
  The Hopkins Plug-In Simple Vehicle Wiring Connector # HM11142464 referenced in your question will plug into ports behind the driver and passenger side tail lights on your 2016 Jeep Cherokee Trailhawk to provide you with an additional 4-Way connector. Because it will be wired to different circuits than your existing OEM 7- and 4-Way connector both connectors can be used at the same time. It sounds like you are then looking for a way to integrate the new 4-Way into the OEM bracket on your...
  view full answer...
• Installation of Brake Controller on 2013 Jeep Wrangler Unlimited With Factory Tow Package
  Since you have the factory tow package on your 2013 Jeep Wrangler unlimited, the installation of the # HM40975-11933 is all that is necessary for a working 7-way. However, you will need some additional wiring to get your brake controller installed. You will need to locate the coiled up light green or blue brake output wire near the emergency brake pedal. You will also need the # 5506 to add circuit breakers and run wire from the battery to provide power as well as a ground connection....
  view full answer...
• Fit of Draw-Tite Class III 76050 Trailer Hitch On Extended Model 2020 Ram ProMaster 3500
  According to Draw-Tite, their # 76050 Class III hitch is a fit for the 2020 Ram ProMaster 3500 Extended model. For a trailer wiring harness on vehicles without the tow package, use # 22112 or # HM40975-11933 for tow package equipped vehicles. For a ball mount, use # C45230 along with the # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. I've linked to some installation videos that you might find helpful.
  view full answer...
• Adding a 7-Way Trailer Connector and Electric Brake Controller to 2011 Jeep Wrangler Unlimited
  Since your 2011 Jeep Wrangler Unlimited has the factory tow package there should be a square plug for the Pollak # HM40975-11933 to plug into. This will work well to supply a 7-way trailer connector. If you need to run wiring to install a brake controller use # 5506. If you don't have the square connector you'll first need to add a 4-way using # 118416 and then convert that 4-way to a 7-way using our # ETBC7 kit. This includes the 7-way and everything you need for an electric brake...
  view full answer...
  
• Replacing a Broken Wiring Harness on a 2007 Dodge Ram Pickup
  If the wiring is damaged, it is always recommended said wiring be replaced or repaired. That being said, I am not aware of a specific part to remedy this without replacing the whole part. You could use Deka Cable Ties like # DW05727-25 as a temporary solution, however. If the vehicle is a 2007 Dodge Ram Pickup, you would use the Pollak 7 Way # HM40975-11933, or the Tekonsha T-One # 118381 if you have a 4 Flat. If the trailer needs the replacement, the Wesbar 4-Pole connector # W787268...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?