Installation of Brake Controller on 2013 Jeep Wrangler Unlimited With Factory Tow Package
Question:
I have a 2013 Wrangler JKU with factory tow package. I ordered HM40975-11933. To switch from a 4 pin to a 7 and 4 pin. What other wires are needed to be able to utilize a 7 pin plug in as well as installing a trailer brake? Im trying to make sure I have everything needed. I already have a Brake Controller. But it doesnt tell me what other wires are needed for the 7 pin to actually work properly.
asked by: Eddie
Expert Reply:
Since you have the factory tow package on your 2013 Jeep Wrangler unlimited, the installation of the # HM40975-11933 is all that is necessary for a working 7-way. However, you will need some additional wiring to get your brake controller installed.
You will need to locate the coiled up light green or blue brake output wire near the emergency brake pedal. You will also need the # 5506 to add circuit breakers and run wire from the battery to provide power as well as a ground connection. If you don't already have one, you will also need a circuit tester like the # PTW2993 to locate the cold side of the stop light switch that only has power when the brakes are applied.
I have attached an installation video below to give you an idea of what the process is like.
Products Referenced in This Question
Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Search Results: tekonsha primus
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Hook Probe Circuit Tester
- Shop: 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Will etrailer Trailer Hitch Fit 2015 Jeep Wrangler Sahara & Best Wiring Harness
- Search Results: stabilizer towing
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Q&A: Recommended Trailer Connector And Wiring Harness For 2014 Jeep Wrangler Unlimited With Tow Package
- Q&A: Parts Needed To Install Redarc Tow-Pro Elite In 2015 Jeep Wrangler W/ Aftermarket 7-way Connector
- Q&A: Parts Needed to Install Prodigy P3 Brake Controller in 2016 Jeep Wrangler with 7-Way
- Q&A: Best and Easiest to Install Brake Controller for 2015 Jeep Wrangler with 4-Way
- Q&A: Weight Distribution for a 4000 Pound Trailer with 400 Pound Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: 90160
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Shop: Suspension Enhancement