Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
Item # C55774
Retail:$53.16
Our Price: $32.90
You Save: 38%
Confirmed to Fit
2005 Chevrolet Silverado
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (611)
- Q & A (0)
- Photos
2005 Chevrolet Silverado - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- CURT
- No Converter
Quickly and easily install a 7-way and a 4-way trailer connector on your Chevrolet Silverado with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind rear bumper
- Plug in connector
- Includes mounting bracket and hardware
- Comes with protective covers for connectors
- Assembled in the USA
- Limited 1-year warranty
Installation
This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
55774 Curt T-Connector - OE Multi-Socket Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors - C55774
Average Customer Rating: 4.7 out of 5 stars (611 Customer Reviews)
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.by: Peter 05/06/2024
The Curt T-Connector vehicle wiring harness fit as recommended by the etrailer.com customer service representative. I wanted to be sure the electrical connector package would fit my Draw-Tite hitch, and it did. The instructions were straightforward, although there were no screws or nuts to attach the metal bracket to the hitch. I had to supply those. I believe they should have been part of the kit. The installation video on the etrailer.com site was very helpful.
by: Charles 05/14/2024
Chevrolet TrailBlazer
This connector worked perfectly on my '06 Chevy Trailblazer. It was very easy to swap it out with my original connector, and the addition of the 4-pole plug makes it easy to eliminate the 7 to 4 pin adapter.
by: Andrew W. 10/26/2018
2003 GMC Yukon XL
I am having a problem with the install of the three Curt trailer components I purchased. I intentionally bought all of the same brand assuming that they would work together. The problem is that the Curt wiring harness (part# C55774) is too long and rigid. When the 7-pin connector is installed in the bracket that comes with it, it measure 5 inches until the black wire protective sleeve bends (to go under the hitch receiver frame).
The no-drill bracket (part# C57202) is supposed to attach the harness bracket to the hitch. But it is only 6.5" long, and the hitch tube is 3" wide. So with the bracket attached to the hitch, there is only 3.5" of space left to mount the harness bracket so that the screw holes line up.
I am disappointed that this is the case, especially as I called etrailer to check that the parts I was ordering would work together.
It looks like I will have to discard C57202 and drill two holes into the bottom of the hitch and mount the harness bracket directly. This is what I wanted to avoid - having to drill holes.
by: Clukero04/04/2024
2007 Chevrolet Silverado Classic
Excellent fit, oversized spare tire still fit underneath (285/70r17).
by: Tim R01/01/2024
2010 ChevroletSilverado
Very easy, plugged right into the uscar connector, drilled 2 holes for the bracket, done
by: Mike04/11/2018
2015 Jeep Grand Cherokee
Super easy, very nice! Great engineering, couldn’t have been any easier! The girls at etrailer are super friendly and very helpful! Great prices and quick shipping, too!!
Mike
4/13/2019
Great. No problems.
by: David02/25/2024
2003 Mercury Mountaineer
This was supposed to be a plug in installation for my 2003 Mercury Mountaineer. No it wasn't. Completely different connector, and the wiring was 2 feet too short. Was able to use it after a bit of clipping and splicing.
by: Greg 04/20/2023
2006 ChevroletSilverado
Very good, fit perfectly
Greg
4/21/2024
It has been working great, holding up well,the same as the day I purchased it. Great product
Bud M.
5/15/2024
@Greg
Great to hear. Thank you for the update.
Greg
5/15/2024
It has been great works exactly as it should
by: Martin04/22/2024
Product I ordered had an inaccurate description. Contacted customer service to return they would not send return shipping label so since the return shipping would have costed more than the part I threw it in the trash and ordered the part needed from another supplier. Needless to say I will not be ordering anything again.
by: Dylan04/10/2021
Perfect fit. My truck was not equipped with a tow package so I was a little worried it wouldn’t fit. The wiring and plug were already there with a cap on it to seal it from dirt/water. Took the cap off and this harness snapped right in place. Also installed an etrailer hitch and new bumper. Very happy with the products and the installer tools and information provided by etrailer.com.
by: Jim 05/04/2024
2017 GMC Acadia Limited
Working well. Have used the four prong plug only but am glad to have the 7 way available if needed.
by: Danny07/31/2020
Harness was easy to install. The truck came prewired. It just needed the adapter. We dremeled our the back of the bumper (2019 Titan’s have the cut our outlined on the back side already). We had to dremel 2 side prices off the harness, but it slide right now. Then we drilled through the plastics bumper cover and the metal on the bumper and bolted the bracket to the bumper.
The 4 point is just fished between the license plate and the bumper. It was easy and it now looks factory. Very happy with how it came out! Install was a cinch!
by: John08/24/2020
2018 Nissan Titan
I have a 2018 Nissan Titan, and while the connector was a perfect fit for connectivity to the factory connector. The Curt T-Connector wiring harness was about 6 inches short from connecting to the factory harness when mounted on the trailer hitch bracket. So, I was forced to mount it on the opposite side by drilling holes in bumper.
by: Todd02/26/2024
2017 Ford Explorer
Always accurate parts and information
by: Randy 05/15/2024
great product oem quality
by: Matthew11/30/2017
If you have multiple trailers that either use a 4-way flat or 7-pin round connector and get tried of having to use an adapter go with this setup. I've had one on my other truck for a couple years and no problems with 'em thus far. You can technically use the old existing mount on the receiver hitch itself but the 4-way will dangle unless you ziptie it up.
by: Robert 04/10/2024
Perfect fit, works well
by: Kent R.06/23/2017
2002 Ford Excursion
My 2002 Ford Excursion 7.3L diesel had the original factory hitch and wiring harness. The quality and heft of the Curt T-Connector is impressive. I bet I get years of use without problems.
by: Brett C04/15/2024
2024 Ford Bronco
Great product and very helpful staff! Thank you!!
by: Caro H06/01/2021
Great product. Installed on my 2018 Jeep GC. Because of dual 4 pin and 7 pin connector I don’t need an adaptor when swapping out trailers/camper. Clean look to it as well.
by: Michael 05/03/2023
2023 Honda Passport
Bought this because of the split 4 pin and 7 pin connectors. I’ve had so many 7 pin to 4 pin adaptors and would forget that I let my son or son in-law use it and had to buy another one when I needed it. This will stop me from the need to buy another adaptor, good for me not good for my son and son in-law when they come over to borrow the trailer. LOL, who am I kidding I’ll still go with them to the store and buy another one.
by: Rhonda04/17/2023
The actual trailer hitch was fine but the wiring kit was not the right kind. When I called to get a return authorization I was told that more than one half the cost of wiring kit will be deducted from my return for postage. I have never had to pay for returns to any company before. I will not be recommending your company
by: Greg01/11/2021
2017 Nissan Titan XD
There was no place on the new hitch to bolt the end to, which was a disappointment. For now I sip tied the end to the hitch in an area where it does not move.
by: David 02/21/2024
2007 Ford F-150
Great product & customer service
by: Vernon 07/17/2023
Great fitment. Had a little difficulty getting to the right version of this but the amazing customer service at ETrailer helped me get to the correct one. Thank y’all! I love any business that’s not named after a rain forrest!
25
611
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Troubleshooting Running Light Circuit That's Not Active with Malone Trailer and Jeep Grand CherokeeIt's not uncommon for a single trailer wiring circuit not to work but if most of the circuits are active and only one isn't it wouldn't be the issue you described of having to have a dealer turn on the tow package. If this were the case none of the trailer wiring would be active. Since we know the problem isn't on the trailer that leaves the issue being on the tow vehicle side of the wiring. A very common reason for this is a dirty or corroded connector for that circuit which can easily...
view full answer... - Troubleshooting Trailer Light Functions Not Working on 2014 Ford F-150On your 2014 Ford F-150 if you don't have factory wiring, you will simply splice into the tail light wiring at your tail lights to get the 4-way functions using # C58044. If you have the factory 4-way, then the harness may be bad or need help connecting. The Curt # C56110 is intended as a factory replacement for your truck. Make sure all the pins are not bent and the connection is free of debris or corrosion. If you have the factory 7-way, you will want to check your factory wiring...
view full answer...
- Trailer Wiring Recommendation for 2015 Chevy TraverseThe type of trailer wiring you'll need really depends on the trailer you plan to tow. For a vehicle like a 2015 Chevy Traverse you'd most likely only need a 4-way since this vehicle would be used to tow lighter duty trailers without brakes. That said, if you plan to tow a camper even the lighter duty campers will have brakes on them so a 7-way could be required. Either way you'd need to start with a 4-way so for that you'd want the part # C56181 which installs easily by plugging inline...
view full answer... - Troubleshooting No Trailer Wiring Turn Signals on 2012 Jeep Grand Cherokee Factory Trailer WiringMost likely it's a blown fuse under the hood of your 2012 Jeep Grand Cherokee for the trailer wiring turn signals. You can check there and replace as needed. The other possibility is that the trailer wiring connector is damaged and is in need of being replaced. I'd first check all of the pins on the connector for corrosion and clean as needed with sandpaper though. But if when you are there you see that the connector is overall in bad shape it's probably just better and easier to replace...
view full answer... - What Trailer Wiring Harness do I use for my 2020 Ford Explorer to Install a 7 Way ConnectorFor your 2020 Ford Explorer with the towing package I recommend using the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774. This will give you the 4-way and 7-way at the rear for use with most trailers out there. The Curt No-Drill Bracket for 7-Way Round Trailer Connector Mounting Bracket part # C57202 will give you a great way to connect your 7-way without any drilling.
view full answer... - Trailer Hitch, Ball Mount and Wiring For 2019 Nissan Titan With Factory Package To Tow A TrailerI recommend the 2" Class III Curt Trailer Hitch Receiver part # C13304 to tow the small trailer with the 2019 Nissan Titan because it is a bit easier of an install compared to the Draw-Tite. I have attached an installation video for your reference. This particular hitch will provide you with 8,000 lbs of gross towing weight capacity. I still recommend to take a look at your owner's manual so you can be familiar with your specific towing weight guidelines for your vehicle. I recommend the...
view full answer...
- Trailer Wiring For 2002 Chevy Silverado 1500 With Tow Package If the 2002 Chevy Silverado 1500 has a tow package you can use Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 which will plug into a connection near the rear bumper of the truck. I have attached a photo of what that connection point should look like. If you look at the rear of your vehicle and there is just a bundle of wires you will need to hard wire the connector. For that you can use part # PK11898.
view full answer... - Can 2004 Chevy Trailblazer Tow 3700 lb GVWR Travel TrailerThe max towing capacity of your 2004 Trailblazer will depend on whether it's a 2WD or 4WD and upon the rear axle gear ratio. According to the owner's manual, the capacity ranges from 4800 lbs for a 4WD EXT with the 6cyl engine with the 3.42 rear end up to 6800 lbs for the 2WD EXT with the 3.73 rear axle. Since the 3700 lb GVWR is well below the minimum 4800 lb towing capacity of the Trailblazer, theoretically you could tow the 2017 Jayco 17RB Hummingbird you speak of, assuming the vehicle...
view full answer... - Can I Use the Putco Red Blade LED Tailgate Light Bar on a 2016 Chevy Silverado 1500As long as your 2016 Chevy Silverado 1500 has a 4 way connector available at the rear of your vehicle, the Putco Red Blade LED Tailgate Light Bar - Stop, Tail, Turn, Backup - 60" Long # P92010-60 will work just fine. This LED light is powered by the 4 way plug that would normally be used to power the lights on a trailer. If your vehicle only came equipped with a factory 7 way plug, I recommend using the Curt # C55774 which will plug into the US car connector port at the rear of your vehicle...
view full answer... - What Trailer Brake Controller do You Recommend for My 2021 Jeep Grand Cherokee with Tow Package?As far as adding a brake controller to your 2021 Jeep Grand Cherokee with a tow package, you need to have a 7-way wiring harness installed. If you do not have a 7-way included in your tow package, I recommend the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat # C55774. After the 7-way is installed, you will have the capability of installing a brake controller. I recommend the Curt Echo # C51180. This controller is a proportional controller which...
view full answer... - How to Easily Install 7-Way on 2018 Ford F-150 that Has 4-Way The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part # 37185 which your 4-way will plug into and then depending on what 7-way functions you need will determine how much of the truck's wiring in the truck frame you'll need to access. The blue wire of the adapter would need to run to the blue wire pointed out in the harness if you have a brake controller,...
view full answer...
- Can 7-Way and 4-Way Both Install on Trailer for Separate Wiring CircuitsWhen you say rear lights do you mean like utility lights so that you could see in the dark? If so you could just use the 12 volt accessory circuit of the 7-way to accomplish that. But aside from that you certainly could have two different connectors on your trailer for two different sets of lights. For a 7-way plug all you'd need is the part # 277-000143 and then for a 4-way part # A25W2GWB for 25 feet.
view full answer... - Can 7-Way and 4-Way of Curt Connector for 2014 Ram 1500 be Used at Same TimeThe Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 are able to be used at the same time but it wouldn't be any different in regards to making sure the circuits were not overloaded. I believe you were referencing a different Q&A and this part was recommended (it fits a number of different vehicles) because the individual was unable to open the covers on their 4-way and 7-way at the same time. That is not an issue you will have...
view full answer... - 2017—2019 Superduty F250 With Factory 7 Pin Extension OptionAs long as nothing is plugged into the other end of the extension you will not receive the error messages you describe. A solution for you available in a variety of lengths but this is the shortest, is the TorkLift Wiring Harness Extension for 21" SuperTruss Hitch Extender # TLW6021. Included are some video resources for additional information.
view full answer... - Recommended 7-Way and 4-Way Connector Combo for a 2005 Ford Excursion Eddie Bauer EditionThe Curt item # C55774 and the Reese item # 74682 you were looking at fit almost any make of vehicle for the last 20+ years that came with a factory 7-way connector because they use a standard USCAR connector. A USCAR 7-way socket is a standardized automotive electrical socket that provides a connection point for trailer wiring. The Curt T-Connector Vehicle Wiring Harness item # C55774 includes both a 7-way and 4-way plug and is confirmed to fit your 2005 Ford Excursion Eddie Bauer edition...
view full answer... - Is Hopkins Endurance Multi-Tow Twist-Mount Correct Replacement for 2007 Nissan Titan ConnectorAs long as you have the US Car Connector on your 2007 Nissan Titan then the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector # HM40920 will fit and work perfectly! Some other poplar options are the Curt T-Connector # C55774 and the Hopkins # HM40975. Both of these install using the same connector as the part you mentioned. The only difference is that the Hopkins you referenced is typically if your pickup has a cutout in the bumper area (see attached photo)...
view full answer...
- Replacement 7-Way Connector for 2006 Ford F-350 Super DutyWe do have replacement 7-way connectors for your 2006 Ford F-350 Super Duty, though I'm not 100 percent certain what are are referring to in terms of also wanting a pigtail. What I recommend is replacing your 7-way with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. This will plug into your tow package harness and give you a brand new 7-way with the ability to also plug in a 4-way if needed. Since you mentioned having a...
view full answer... - Parts Needed to Tow a Trailer with a 2017 Ford Transit T150 VanFor your 2017 Ford Transit T150 I suggest the Draw-Tite # 75912. This is a 2 inch, Class III trailer hitch receiver confirmed to fit your van. All of the hardware is included and no drilling is required for installation. If your Transit does not have the factory tow package you can use # C56327 for a 4-way trailer connector and you can add the # ETBC7 kit if you need a 7-way. Use # C55774 for both a 4-way and 7-way in one part if the Transit has the tow package. If you don't already...
view full answer... - Replacing Factory Trailer Wiring On A 2013 GMC Sierra 2500HDIt will definitely be worthwhile to test the wires behind your trailer plug. This way we can know if the issue lies with the receptacle itself, or with the vehicle wiring harness. To replace just the receptacle, you can use the Curt # C55774. If you are needing to completely replace the vehicle side wiring, we suggest using a 4 flat harness # C56496 along with the Universal Install Kit # ETBC7. There are no plug-and-play options for this truck so this will require cutting and splicing...
view full answer... - Troubleshooting Brake Controller on 2012 Ram 1500You did well with your initial troubleshooting, and though we don't have any experience with OEM brake controllers I can still give you some tips on steps you can take to try and remedy the situation. We know it's not going to be the brakes and it is unlikely to be the wiring on the trailer, so we can narrow it down some. You will need to find out if the issue is on the brake controller or elsewhere, such as the connector. To test the brake controller, sever the blue wire a couple inches...
view full answer... - Availability of a Replacement Trailer Wiring Harness and Connector for a 2006 Ford F-250 Super DutyI am sorry to hear about your dog chewing up your trailer connector and I hope the dog is well after the incident. We do carry a Replacement Multi-Tow Plug and Harness, it is # C55774. It has both 7-Way and 4-Way connectors built in and it will fit a 2006 Ford F-250 that came with a factory 7-Way wiring harness.
view full answer... - How To Install Curt 7-way Connector C55774 On 2002 GMC Sierra Where OEM Connector Was Cut OffWe have just what you are looking for! Since the factory connector on your 2002 GMC Sierra 1500 was cut off by the previous owner, you can add a new one using the Tow Ready Replacement 7-Way Harness and Socket for Factory Tow Package # 20147. This will give you the correct connector to plug into the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 you purchased. Now to install the # 20147 you will need to use a circuit tester...
view full answer... - What Are The Best Towing Products For A 2014 Jeep Grand CherokeeThe best hitch receiver for your 2014 Jeep Grand Cherokee is the Curt Trailer Hitch Receiver part # C13182 as this hitch receiver has the highest tongue weight capacity of all other hitch receivers available for your vehicle. This trailer hitch is custom fit to your vehicle with no drilling required for installation. I also have an installation video of this hitch installed on a 2014 Jeep Grand Cherokee which I have attached for you. You will also need a few other components before you...
view full answer...
- No Power At OEM Trailer Connector On A 2013 Jeep GC LaredoI would start by inspecting your connector for corrosion or debris that could affect your connection points. If they need cleaned, I would give that a go and try the connector again. Next, I would check your ground connections for corrosion, stacked rings, or if it's loosely mounted. A wire brush, reset or tightening down would be in order. If that has not helped, using a circuit tester like # PTW2993 to test the pins on the connector where the wiring harness plugs into the truck is...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Dustin K
Video by:
Michael B
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
10/26/2018
The 7-way bracket that comes with the wiring harness part # C55774 is designed to be installed with the wiring harness bracket hanging below the no drill bracket part # C57202. Since you are worried about the loose wiring I would recommend using some wire loom such as part # 459075-1 to protect your wiring and zip tie any slack with zip ties part # DW05726-25. I know this is not the option you wanted but I feel it is better than drilling into the hitch.
Helpful Links
Accessories-and-Parts/Curt/C57202.html
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Tools/Deka/DW05726-25.html
Tools/Spectro/459075-1.html